From jhaydon at snf.stanford.edu Tue Nov 4 08:50:07 2003 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 4 Nov 2003 08:50:07 -0800 Subject: Shutdown innotec 2003-11-04 08:50:07: shield change Message-ID: down for shield change shuold be back up this afternoon From maurice at snf.stanford.edu Tue Nov 4 17:49:40 2003 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 4 Nov 2003 17:49:40 -0800 Subject: Shutdown innotec 2003-11-04 08:50:07: shield change Message-ID: shield change system coated From jhaydon at snf.stanford.edu Thu Nov 6 13:19:08 2003 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Thu, 6 Nov 2003 13:19:08 -0800 Subject: Shutdown innotec 2003-11-06 13:19:07: cryo pump problem Message-ID: cryo pump making knocking noise shut it down for regen and adsorber change should be back tomorrow morning if all goes well From jperez at snf.stanford.edu Fri Nov 7 14:28:28 2003 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 7 Nov 2003 14:28:28 -0800 Subject: Shutdown innotec 2003-11-06 13:19:07: cryo pump problem Message-ID: Regen cryo pump complete. From ajavey at snf.stanford.edu Sat Nov 8 00:08:00 2003 From: ajavey at snf.stanford.edu (ajavey at snf.stanford.edu) Date: Sat, 8 Nov 2003 00:08:00 -0800 Subject: Problem innotec 2003-11-08 00:08:00: Be very careful when lowering the bell jar!!! Message-ID: Please be careful when lowering the bell jar. The inside sheels, covering the cap are a bit loose. When lowering the bell jar, make sure the sheels do not hit the center piece. I just had that probem.... From yinliu at snf.stanford.edu Sun Nov 9 17:48:31 2003 From: yinliu at snf.stanford.edu (yinliu at snf.stanford.edu) Date: Sun, 9 Nov 2003 17:48:31 -0800 Subject: Problem innotec 2003-11-09 17:48:30: no high voltage power Message-ID: The morning deposition was ok, although still leak. Afternoon, I could not get High Voltage Power on at Telemark. From yinliu at snf.stanford.edu Sun Nov 9 18:07:00 2003 From: yinliu at snf.stanford.edu (yinliu at snf.stanford.edu) Date: Sun, 9 Nov 2003 18:07:00 -0800 Subject: Shutdown innotec 2003-11-09 18:07:00: No High Voltage Message-ID: No High Voltage From jhaydon at snf.stanford.edu Mon Nov 10 09:43:39 2003 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 10 Nov 2003 09:43:39 -0800 Subject: Shutdown innotec 2003-11-09 18:07:00: No High Voltage Message-ID: could not find a problem From jhaydon at snf.stanford.edu Mon Nov 10 09:45:14 2003 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 10 Nov 2003 09:45:14 -0800 Subject: Problem innotec 2003-11-09 17:48:30: no high voltage power Message-ID: could not find a problem From jperez at snf.stanford.edu Wed Nov 12 09:37:57 2003 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Wed, 12 Nov 2003 09:37:57 -0800 Subject: Problem innotec 2003-11-08 00:08:00: Be very careful when lowering the bell jar!!! Message-ID: The shields have been tighten and seem to clearing the pilers. When bring the bell jar down or up you should always listen and watch that the bell jar isn't snagged on something.+ From grupp at snf.stanford.edu Fri Nov 21 02:20:38 2003 From: grupp at snf.stanford.edu (grupp at snf.stanford.edu) Date: Fri, 21 Nov 2003 02:20:38 -0800 Subject: Problem innotec 2003-11-21 02:20:37: planetary moves jerkily Message-ID: looks like it's getting kicked. stops, then jumps very fast. From jhaydon at snf.stanford.edu Mon Nov 24 13:40:18 2003 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 24 Nov 2003 13:40:18 -0800 Subject: Problem innotec 2003-11-21 02:20:37: planetary moves jerkily Message-ID: this was probably caused by a dome not comin`g down in a good spot,