From mislam at snf.stanford.edu Tue Jun 1 13:08:23 2004 From: mislam at snf.stanford.edu (mislam at snf.stanford.edu) Date: Tue, 1 Jun 2004 13:08:23 -0700 Subject: Problem innotec 2004-06-01 13:08:22: Crystal holders/pockets not working Message-ID: At the start of deposition crystal failed. Vented chamber and try to troubleshoot. The system was not activating back crystal pocket. Called Jim, he tried. It seemed that the front pocket was acepting crystal. Decided to try the deposition but it did not show any deposition. Completed my run w/o crystal. From maurice at snf.stanford.edu Tue Jun 1 14:56:55 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 1 Jun 2004 14:56:55 -0700 Subject: Comment innotec 2004-03-17 16:20:38: system coated after clean Message-ID: logged From maurice at snf.stanford.edu Tue Jun 1 14:57:22 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 1 Jun 2004 14:57:22 -0700 Subject: Comment innotec 2004-03-19 20:55:04: Planetary making grinding noise Message-ID: logged From maurice at snf.stanford.edu Tue Jun 1 14:57:39 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 1 Jun 2004 14:57:39 -0700 Subject: Comment innotec 2004-05-16 13:10:59: gold peel off not cleaned Message-ID: logged From jhaydon at snf.stanford.edu Tue Jun 1 16:55:30 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 1 Jun 2004 16:55:30 -0700 Subject: Problem innotec 2004-06-01 13:08:22: Crystal holders/pockets not working Message-ID: crystal working now dissabled the shutter From pethe at snf.stanford.edu Fri Jun 4 20:55:31 2004 From: pethe at snf.stanford.edu (pethe at snf.stanford.edu) Date: Fri, 4 Jun 2004 20:55:31 -0700 Subject: Problem innotec 2004-06-04 20:55:30: Ni source piece slipped through the gap between crucible and magnet Message-ID: When I was removing the Ni source after my deposition, teh source fell through the gap between the crucible and the electromagnet. From aokyay at snf.stanford.edu Sat Jun 5 10:52:41 2004 From: aokyay at snf.stanford.edu (aokyay at snf.stanford.edu) Date: Sat, 5 Jun 2004 10:52:41 -0700 Subject: Problem innotec 2004-06-05 10:52:40: crystal problem Message-ID: The rate reading failed. (similar problem experienced last week) Timed and finished the run. From qwang at snf.stanford.edu Sat Jun 5 18:52:56 2004 From: qwang at snf.stanford.edu (qwang at snf.stanford.edu) Date: Sat, 5 Jun 2004 18:52:56 -0700 Subject: Comment innotec 2004-06-05 18:52:55: crystal reading works Message-ID: From wistey at snf.stanford.edu Mon Jun 7 02:16:05 2004 From: wistey at snf.stanford.edu (wistey at snf.stanford.edu) Date: Mon, 7 Jun 2004 02:16:05 -0700 Subject: Shutdown innotec 2004-06-07 02:16:04: Cryo quit Message-ID: There was an error about a process failure, and the cryo temperature started rising. It was icing up too, so I shut it off. From maurice at snf.stanford.edu Mon Jun 7 17:19:33 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 7 Jun 2004 17:19:33 -0700 Subject: Shutdown innotec 2004-06-07 02:16:04: Cryo quit Message-ID: regen complete From maurice at snf.stanford.edu Mon Jun 7 17:20:17 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 7 Jun 2004 17:20:17 -0700 Subject: Problem innotec 2004-06-04 20:55:30: Ni source piece slipped through the gap between crucible and magnet Message-ID: removed by next user From maurice at snf.stanford.edu Mon Jun 7 17:20:54 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 7 Jun 2004 17:20:54 -0700 Subject: Comment innotec 2004-05-30 23:29:00: Cannot clean the shutter peel off. Message-ID: logged From maurice at snf.stanford.edu Mon Jun 7 17:21:15 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 7 Jun 2004 17:21:15 -0700 Subject: Problem innotec 2004-06-05 10:52:40: crystal problem Message-ID: working again From maurice at snf.stanford.edu Mon Jun 7 17:21:25 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Mon, 7 Jun 2004 17:21:25 -0700 Subject: Comment innotec 2004-06-05 18:52:55: crystal reading works Message-ID: logged