From parco at snf.stanford.edu Tue Mar 2 18:45:02 2004 From: parco at snf.stanford.edu (parco at snf.stanford.edu) Date: Tue, 2 Mar 2004 18:45:02 -0800 Subject: Shutdown innotec 2004-03-02 18:45:02: Gun Filament 1 says "intlk" Message-ID: Gun filament 1 says "intlk", instead of "off". "Interlock WFS1-WFS2 " continue to flash on the manual (& runtime screen) program(s). Toggle down to gunfilament 1 menu, press F2 to turn on the "off" position but no response or changes occured. Decide d to shutdown to avoid further complication from labusers using tonight 4/2/2004. From cbaxter at snf.stanford.edu Tue Mar 2 21:23:34 2004 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Tue, 2 Mar 2004 21:23:34 -0800 Subject: Shutdown innotec 2004-03-02 18:45:02: Gun Filament 1 says "intlk" Message-ID: System ok From jperez at snf.stanford.edu Fri Mar 5 16:31:03 2004 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 5 Mar 2004 16:31:03 -0800 Subject: Problem innotec 2004-03-05 16:31:03: Shield Cover foil removed,but needs to be over opening. Message-ID: Jim H. has removed the foil to the plate that covers the exhaust to the cryo pump. Please leave the plate in the position you see it in the Innotec. From kwang at snf.stanford.edu Mon Mar 15 01:01:47 2004 From: kwang at snf.stanford.edu (kwang at snf.stanford.edu) Date: Mon, 15 Mar 2004 01:01:47 -0800 Subject: Problem innotec 2004-03-15 01:01:47: crucible jammed Message-ID: due to the spike of the Si target. can not rotate. it's stuck. From jhaydon at snf.stanford.edu Mon Mar 15 09:47:38 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 15 Mar 2004 09:47:38 -0800 Subject: Problem innotec 2004-03-15 01:01:47: crucible jammed Message-ID: crucible is now working ok to use From jperez at snf.stanford.edu Wed Mar 17 10:51:57 2004 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Wed, 17 Mar 2004 10:51:57 -0800 Subject: Shutdown innotec 2004-03-17 10:51:56: Changing shields, shutter, view port window,etc. Message-ID: From jhaydon at snf.stanford.edu Wed Mar 17 15:37:27 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 17 Mar 2004 15:37:27 -0800 Subject: Shutdown innotec 2004-03-17 10:51:56: Changing shields, shutter, view port window,etc. Message-ID: new shields installed ok to use From jhaydon at snf.stanford.edu Wed Mar 17 15:37:39 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 17 Mar 2004 15:37:39 -0800 Subject: Problem innotec 2004-03-05 16:31:03: Shield Cover foil removed,but needs to be over opening. Message-ID: From maurice at snf.stanford.edu Wed Mar 17 16:20:38 2004 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 17 Mar 2004 16:20:38 -0800 Subject: Comment innotec 2004-03-17 16:20:38: system coated after clean Message-ID: 1 micron of Al deposited From jhemanth at snf.stanford.edu Fri Mar 19 20:55:04 2004 From: jhemanth at snf.stanford.edu (jhemanth at snf.stanford.edu) Date: Fri, 19 Mar 2004 20:55:04 -0800 Subject: Comment innotec 2004-03-19 20:55:04: Planetary making grinding noise Message-ID: I checked the planetary by rotating it before pumpdown and heard a huge grinding noise. I also checked the rotation of the planetary could see that it was wobbling a bit during rotation. I have never heard this noise in my previous runs and wanted to report the problem From daneman at snf.stanford.edu Mon Mar 22 18:37:41 2004 From: daneman at snf.stanford.edu (daneman at snf.stanford.edu) Date: Mon, 22 Mar 2004 18:37:41 -0800 Subject: Problem innotec 2004-03-22 18:37:40: Planetary doesn't rotate Message-ID: or starts to rotate and then stops. Looks like the gear is not catching. Also the front crysal monitor tray doesn't make electrical contact. From jhaydon at snf.stanford.edu Tue Mar 23 11:00:50 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 23 Mar 2004 11:00:50 -0800 Subject: Problem innotec 2004-03-22 18:37:40: Planetary doesn't rotate Message-ID: planetary fixed had a loose set screw From emyers at snf.stanford.edu Wed Mar 24 12:24:30 2004 From: emyers at snf.stanford.edu (emyers at snf.stanford.edu) Date: Wed, 24 Mar 2004 12:24:30 -0800 Subject: Problem innotec 2004-03-24 12:24:29: No Rotation Message-ID: Rotation of the Planetary does not seem to be working. I tested before pumping down and could not get it to function. From qwang at snf.stanford.edu Wed Mar 24 18:31:28 2004 From: qwang at snf.stanford.edu (qwang at snf.stanford.edu) Date: Wed, 24 Mar 2004 18:31:28 -0800 Subject: Comment innotec 2004-03-24 18:31:26: No Rotation Message-ID: From jhaydon at snf.stanford.edu Thu Mar 25 10:05:13 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Thu, 25 Mar 2004 10:05:13 -0800 Subject: Comment innotec 2004-03-24 18:31:26: No Rotation Message-ID: From jhaydon at snf.stanford.edu Thu Mar 25 10:06:10 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Thu, 25 Mar 2004 10:06:10 -0800 Subject: Problem innotec 2004-03-24 12:24:29: No Rotation Message-ID: planetary power supply over load tripped working now ok to use