From kwang at snf.stanford.edu Wed May 12 23:05:43 2004 From: kwang at snf.stanford.edu (kwang at snf.stanford.edu) Date: Wed, 12 May 2004 23:05:43 -0700 Subject: Problem innotec 2004-05-12 23:05:43: Fe target exploded Message-ID: the Fe target exploded at 2.5% power (I've use it at this power many times before), with shutter closed. Melted Fe splashed out, and "soldered" the crucible together with the surrounding parts. So now the harth can't rotate. The other two targets I used today are left inside: C4: Ti; C1: Si. The Fe target was penetrated all the way through bottom. From jhaydon at snf.stanford.edu Thu May 13 09:18:10 2004 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Thu, 13 May 2004 09:18:10 -0700 Subject: Problem innotec 2004-05-12 23:05:43: Fe target exploded Message-ID: cruicible unstuck ok to use From xielm at snf.stanford.edu Sun May 16 13:11:00 2004 From: xielm at snf.stanford.edu (xielm at snf.stanford.edu) Date: Sun, 16 May 2004 13:11:00 -0700 Subject: Comment innotec 2004-05-16 13:10:59: gold peel off not cleaned Message-ID: The previous user didn't clean the gold peel off. I cannot find the vaccum tube to clean it. From xielm at snf.stanford.edu Sun May 30 23:29:01 2004 From: xielm at snf.stanford.edu (xielm at snf.stanford.edu) Date: Sun, 30 May 2004 23:29:01 -0700 Subject: Comment innotec 2004-05-30 23:29:00: Cannot clean the shutter peel off. Message-ID: Tried to clean the shutter metal peel off after use, but the screw is too tight, cannot take the shutter off.