From rohank at snf.stanford.edu Fri Apr 1 23:22:41 2005 From: rohank at snf.stanford.edu (rohank at snf.stanford.edu) Date: Fri, 1 Apr 2005 23:22:41 -0800 Subject: Problem innotec SNF 2005-04-01 23:22:40: Crucible 4 Message-ID: While doing the before-use inspection, I noticed some sort of white ash in C4. It does not seem to be of metallic origin. From jhaydon at snf.stanford.edu Tue Apr 5 10:15:57 2005 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 5 Apr 2005 10:15:57 -0700 Subject: Problem innotec SNF 2005-04-01 23:22:40: Crucible 4 Message-ID: From ratiug at snf.stanford.edu Thu Apr 7 18:27:03 2005 From: ratiug at snf.stanford.edu (ratiug at snf.stanford.edu) Date: Thu, 7 Apr 2005 18:27:03 -0700 Subject: Problem innotec SNF 2005-04-07 18:27:02: Pt target expoded Message-ID: during heating up Pt target up to 9.5% power, it expoded. My heat time is 0.5% per 20sec. Sorry for mess up the target. From ratiug at stanford.edu Thu Apr 7 21:12:56 2005 From: ratiug at stanford.edu (Ching-Huang Lu) Date: Thu, 7 Apr 2005 21:12:56 -0700 Subject: Pt target can't be used right now Message-ID: <001b01c53bf1$40388450$0f0ba8c0@CHL> Hi All innotec users, Tonight, during my deposition, Pt target exploded. Right now the Pt target can't be used before it is rebuilt. Sorry for the inconvenience. Ching-Huang -------------- next part -------------- An HTML attachment was scrubbed... URL: From jperez at snf.stanford.edu Mon Apr 11 13:37:09 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 11 Apr 2005 13:37:09 -0700 Subject: Shutdown innotec SNF 2005-04-11 13:37:08: Cryo Temperature at 282K Message-ID: I started the Regen at 1:35 PM. No one had used the Innotec so high temperature wasn't noticed. Due to Power gitch last night. From jperez at snf.stanford.edu Tue Apr 12 13:36:45 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 12 Apr 2005 13:36:45 -0700 Subject: Shutdown innotec SNF 2005-04-11 13:37:08: Cryo Temperature at 282K Message-ID: Regen complete! From seoung at snf.stanford.edu Wed Apr 13 00:10:20 2005 From: seoung at snf.stanford.edu (seoung at snf.stanford.edu) Date: Wed, 13 Apr 2005 00:10:20 -0700 Subject: Problem innotec SNF 2005-04-13 00:10:15: Planetary does not work Message-ID: During a Cr evaporation, the planetary stopped rotating. Currently, It does not rotate. From jhaydon at snf.stanford.edu Wed Apr 13 11:52:59 2005 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 13 Apr 2005 11:52:59 -0700 Subject: Problem innotec SNF 2005-04-13 00:10:15: Planetary does not work Message-ID: pin fell out reinstalled pin ok to use From rcrane at snf.stanford.edu Wed Apr 13 15:29:35 2005 From: rcrane at snf.stanford.edu (rcrane at snf.stanford.edu) Date: Wed, 13 Apr 2005 15:29:35 -0700 Subject: Problem innotec SNF 2005-04-07 18:27:02: Pt target expoded Message-ID: Pt source reconditioned From parco at snf.stanford.edu Thu Apr 14 08:02:52 2005 From: parco at snf.stanford.edu (parco at snf.stanford.edu) Date: Thu, 14 Apr 2005 08:02:52 -0700 Subject: Comment innotec SNF 2005-04-14 08:02:52: BE VERY CAREFUL!!!! Message-ID: BE VERY CAREFUL OF BRINGING DOWN THE BELL JAR!!! IT REQUIRES SOME CAREFUL ALIGNING OR YOU WILL DESTORY THE PLANETARY STANDS. IT HANGS OR CATCHES TO THE FAR LEFT REAR. From swkim at snf.stanford.edu Wed Apr 20 16:31:39 2005 From: swkim at snf.stanford.edu (swkim at snf.stanford.edu) Date: Wed, 20 Apr 2005 16:31:39 -0700 Subject: Shutdown innotec SNF 2005-04-20 16:31:38: water off Message-ID: From maurice at snf.stanford.edu Wed Apr 20 16:47:01 2005 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 20 Apr 2005 16:47:01 -0700 Subject: Shutdown innotec SNF 2005-04-20 16:31:38: water off Message-ID: Mr Baxter rest chiller downstairs From jperez at snf.stanford.edu Fri Apr 22 12:01:27 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 22 Apr 2005 12:01:27 -0700 Subject: Shutdown innotec SNF 2005-04-22 12:01:26: Bell jar side shields coming off ledges Message-ID: Scrapping against pillars. From cbaxter at snf.stanford.edu Fri Apr 22 22:09:26 2005 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Fri, 22 Apr 2005 22:09:26 -0700 Subject: Shutdown innotec SNF 2005-04-22 12:01:26: Bell jar side shields coming off ledges Message-ID: re-position shield back in place. user need to be extra careful when lower belljar. From jperez at snf.stanford.edu Mon Apr 25 14:44:40 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 25 Apr 2005 14:44:40 -0700 Subject: Comment innotec SNF 2005-04-25 14:44:40: Careful when bring down belljar, Message-ID: inner shield close to pillar.