From jhaydon at snf.stanford.edu Tue Nov 1 09:30:03 2005 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 1 Nov 2005 09:30:03 -0800 Subject: Shutdown innotec SNF 2005-10-31 15:28:08: down for regen Message-ID: regen completed From maurice at snf.stanford.edu Wed Nov 2 11:58:10 2005 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 2 Nov 2005 11:58:10 -0800 Subject: Problem innotec SNF 2005-10-25 13:32:06: The crystal isn't working, part on order Message-ID: Jim found loose wires on monitor...seems to be working From sbank at snf.stanford.edu Thu Nov 3 06:22:56 2005 From: sbank at snf.stanford.edu (sbank at snf.stanford.edu) Date: Thu, 3 Nov 2005 06:22:56 -0800 Subject: Comment innotec SNF 2005-11-03 06:22:56: Shutter Issue Message-ID: Shutter doesn't quite fit on arm correctly so it isn't held into place. Slipped while opening and closing. MAKE SURE SHUTTER IS TIGHTENED DOWN BEFORE PUMPING DOWN. From gibby at snf.stanford.edu Tue Nov 15 09:31:13 2005 From: gibby at snf.stanford.edu (gibby at snf.stanford.edu) Date: Tue, 15 Nov 2005 09:31:13 -0800 Subject: Shutdown innotec SNF 2005-11-15 09:31:12: Crucible Stuck Message-ID: During deposition, the Pt target splattered (though I'm not sure why). Upon unloading, the cruicble tried to rotate to C2, but became stuck between C3 and C4. I was able to unload C4, but the Pt target is still in C3. Any advice on how to prevent this in the future would be appreciated. Sorry for the hassle. From jperez at snf.stanford.edu Tue Nov 15 11:31:27 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 15 Nov 2005 11:31:27 -0800 Subject: Comment innotec SNF 2005-11-03 06:22:56: Shutter Issue Message-ID: There are five new shutters that don't fit as well as the original shutters, but never the less they work. You just have to find the best level before tightening the screw. From jperez at snf.stanford.edu Tue Nov 15 11:34:53 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 15 Nov 2005 11:34:53 -0800 Subject: Shutdown innotec SNF 2005-11-15 09:31:12: Crucible Stuck Message-ID: Hearth stuck due to Pt splattering and jamming hearth from rotating. Due to too much power From jhemanth at snf.stanford.edu Thu Nov 17 19:56:54 2005 From: jhemanth at snf.stanford.edu (jhemanth at snf.stanford.edu) Date: Thu, 17 Nov 2005 19:56:54 -0800 Subject: Shutdown innotec SNF 2005-11-17 19:56:53: Source Won't turn ON. System water interlock is ON Message-ID: Cesar Baxter found a water leak in the basement and asked me to shut down Innotec. From jperez at snf.stanford.edu Fri Nov 18 07:58:46 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 18 Nov 2005 07:58:46 -0800 Subject: Shutdown innotec SNF 2005-11-17 19:56:53: Source Won't turn ON. System water interlock is ON Message-ID: Chiller doesn't seem to be leaking. Checked twice for water before bring system up. May have been water spill when chiller was being filled. From ykkato at snf.stanford.edu Fri Nov 18 14:20:42 2005 From: ykkato at snf.stanford.edu (ykkato at snf.stanford.edu) Date: Fri, 18 Nov 2005 14:20:42 -0800 Subject: Shutdown innotec SNF 2005-11-18 14:20:41: water chiller failure Message-ID: Interlock WFS1, WSF2 came on the innotec screen; water interlock came on the telemark. Talked to Jeanie and Ceazer about the problem. From jperez at snf.stanford.edu Fri Nov 18 14:53:51 2005 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 18 Nov 2005 14:53:51 -0800 Subject: Shutdown innotec SNF 2005-11-18 14:53:50: Chiller keeps shutting off Message-ID: From cbaxter at snf.stanford.edu Fri Nov 18 16:02:52 2005 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Fri, 18 Nov 2005 16:02:52 -0800 Subject: Shutdown innotec SNF 2005-11-18 14:53:50: Chiller keeps shutting off Message-ID: secured interlock cable with tie warp and cleaned connector with contact cleaner. From cbaxter at snf.stanford.edu Fri Nov 18 16:03:02 2005 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Fri, 18 Nov 2005 16:03:02 -0800 Subject: Shutdown innotec SNF 2005-11-18 14:20:41: water chiller failure Message-ID: From martinb at snf.stanford.edu Sat Nov 19 09:03:18 2005 From: martinb at snf.stanford.edu (martinb at snf.stanford.edu) Date: Sat, 19 Nov 2005 09:03:18 -0800 Subject: Shutdown innotec SNF 2005-11-19 09:03:17: Water interlock problem Message-ID: The previous two users seem to have encounterd problems with the egun cooling system. The tool is labled "out of service". I guess if you want to do something with the tool you'll need a big wrench ;-). Cheers, Martin From jhaydon at snf.stanford.edu Mon Nov 21 11:03:49 2005 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 21 Nov 2005 11:03:49 -0800 Subject: Shutdown innotec SNF 2005-11-19 09:03:17: Water interlock problem Message-ID: possible flakey controller board