From jperez at snf.stanford.edu Tue Jan 3 15:20:15 2006 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 3 Jan 2006 15:20:15 -0800 Subject: Comment innotec SNF 2005-10-25 18:38:44: planetary sticky but still moving Message-ID: Much smoother rotation since Jim Haydon worked on the planetary this holiday week. From yamanaka at snf.stanford.edu Tue Jan 10 17:48:28 2006 From: yamanaka at snf.stanford.edu (yamanaka at snf.stanford.edu) Date: Tue, 10 Jan 2006 17:48:28 -0800 Subject: Comment innotec SNF 2006-01-10 17:48:27: Cr target Message-ID: The plastic bag of Cr was melt, when I returned Cr target into it. I waited more than 5 min. (about 8min) to cool before venting. So I don't know why it was still hot. I enter it into big plastic bag. Sorry for this inconvenient. Kazuhiko From yamanaka at snf.stanford.edu Tue Jan 10 17:50:38 2006 From: yamanaka at snf.stanford.edu (yamanaka at snf.stanford.edu) Date: Tue, 10 Jan 2006 17:50:38 -0800 Subject: Problem innotec SNF 2006-01-10 17:50:38: Cr target Message-ID: The plastic bag of Cr was melt, when I returned Cr target into it. I waited more than 5 min. (about 8min) to cool before venting. So I don't know why it was still hot. I enter it into big plastic bag. Sorry for this inconvenient. Kazuhiko From maurice at snf.stanford.edu Wed Jan 11 11:19:31 2006 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 11 Jan 2006 11:19:31 -0800 Subject: Comment innotec SNF 2006-01-11 11:19:31: new Cr Message-ID: I put a new Cr target in the box From maurice at snf.stanford.edu Wed Jan 11 11:19:53 2006 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 11 Jan 2006 11:19:53 -0800 Subject: Comment innotec SNF 2006-01-10 17:48:27: Cr target Message-ID: logged From maurice at snf.stanford.edu Wed Jan 11 11:20:04 2006 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 11 Jan 2006 11:20:04 -0800 Subject: Problem innotec SNF 2006-01-10 17:50:38: Cr target Message-ID: logged From ratiug at snf.stanford.edu Fri Jan 13 16:02:34 2006 From: ratiug at snf.stanford.edu (ratiug at snf.stanford.edu) Date: Fri, 13 Jan 2006 16:02:34 -0800 Subject: Comment innotec SNF 2006-01-13 16:02:27: Pt target splashed Message-ID: Pt target splashed during heating up. Sorry for any inconvenience. From ratiug at snf.stanford.edu Fri Jan 13 16:05:04 2006 From: ratiug at snf.stanford.edu (ratiug at snf.stanford.edu) Date: Fri, 13 Jan 2006 16:05:04 -0800 Subject: Problem innotec SNF 2006-01-13 16:04:57: Pt target splash Message-ID: From rscheffler at snf.stanford.edu Mon Jan 16 21:44:51 2006 From: rscheffler at snf.stanford.edu (rscheffler at snf.stanford.edu) Date: Mon, 16 Jan 2006 21:44:51 -0800 Subject: Problem innotec SNF 2006-01-16 21:44:51: thickness and crystal health Message-ID: After depositing a 99 A Cr layer, I was in the middle of depositting a 5000A Au layer when the thickness read -3.38 kA adn the crystal health read 96%. The crystal health had been 89% prior, and I think that I had a little more than 1000 A depositted at this point. I was at 16% power when this happened, which might have been high. (There are several other enteries in the log book at this percentage though.) As the crystal health was erronious, I went ahead and replaced the crystal. Any ideas what Idid wrong? From jperez at snf.stanford.edu Tue Jan 17 07:40:46 2006 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 17 Jan 2006 07:40:46 -0800 Subject: Comment innotec SNF 2006-01-11 11:19:31: new Cr Message-ID: After contaminating the other new target with plastic, a new source was put in its place From jperez at snf.stanford.edu Tue Jan 17 07:45:42 2006 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 17 Jan 2006 07:45:42 -0800 Subject: Comment innotec SNF 2006-01-13 16:02:27: Pt target splashed Message-ID: May have been applying too much power too quickly or Source may have been too small for the amount of power used. From jperez at snf.stanford.edu Tue Jan 17 07:47:00 2006 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 17 Jan 2006 07:47:00 -0800 Subject: Problem innotec SNF 2006-01-13 16:04:57: Pt target splash Message-ID: Same as before, too much power too fast or too low volume of Pt for the power used. From jperez at snf.stanford.edu Tue Jan 17 10:36:06 2006 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 17 Jan 2006 10:36:06 -0800 Subject: Problem innotec SNF 2006-01-16 21:44:51: thickness and crystal health Message-ID: Replaced crystal From lwchang at snf.stanford.edu Tue Jan 17 20:53:15 2006 From: lwchang at snf.stanford.edu (lwchang at snf.stanford.edu) Date: Tue, 17 Jan 2006 20:53:15 -0800 Subject: Shutdown innotec SNF 2006-01-17 20:53:14: rough pump failed Message-ID: The ATM light didn't go off within 10sec after pressing F5(pump only). Tried reseating bell jar several times, didn't work.Chamber is left vented. Sorry for the inconvenience. From jhaydon at snf.stanford.edu Wed Jan 18 08:22:36 2006 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 18 Jan 2006 08:22:36 -0800 Subject: Shutdown innotec SNF 2006-01-17 20:53:14: rough pump failed Message-ID: chamber was probably not down all the way From martinb at snf.stanford.edu Thu Jan 26 09:07:00 2006 From: martinb at snf.stanford.edu (martinb at snf.stanford.edu) Date: Thu, 26 Jan 2006 09:07:00 -0800 Subject: Problem innotec SNF 2006-01-26 09:06:59: Pump Down Message-ID: Could not pump down - System is vented! Martin From maurice at snf.stanford.edu Thu Jan 26 14:56:43 2006 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Thu, 26 Jan 2006 14:56:43 -0800 Subject: Problem innotec SNF 2006-01-26 09:06:59: Pump Down Message-ID: Opened and closed chamber. No pump problems! From cmfaulkn at snf.stanford.edu Thu Jan 26 17:32:59 2006 From: cmfaulkn at snf.stanford.edu (cmfaulkn at snf.stanford.edu) Date: Thu, 26 Jan 2006 17:32:59 -0800 Subject: Problem innotec SNF 2006-01-26 17:32:58: film needs to be replaced Message-ID: Film is at end of roll and coating fast. From jhaydon at snf.stanford.edu Fri Jan 27 11:10:23 2006 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Fri, 27 Jan 2006 11:10:23 -0800 Subject: Problem innotec SNF 2006-01-26 17:32:58: film needs to be replaced Message-ID: new film installed From ratiug at stanford.edu Mon Jan 30 11:35:03 2006 From: ratiug at stanford.edu (Ching-Huang Lu) Date: Mon, 30 Jan 2006 11:35:03 -0800 Subject: Innotec is free from 4pm~8pm today References: <200601271941.k0RJfBAc012465@smtp3.Stanford.EDU> Message-ID: <000a01c625d4$445ae5a0$fd6140ab@ratiug> Got another reservation this morning. I just released my reservation from 4~8pm. Ching-Huang