From pnataraj at snf.stanford.edu  Wed Jan  3 21:21:23 2007
From: pnataraj at snf.stanford.edu (pnataraj at snf.stanford.edu)
Date: Wed, 3 Jan 2007 21:21:23 -0800
Subject: Problem innotec SNF 2007-01-03 21:21:23: interlock error
Message-ID: <mailman.636.1357938402.25732.innotec-pcs@snf.stanford.edu>

my dep got stoped in the middle shows interlock WFS1 and WFS2 error. I manage to get my samples out and it seems pumping down. 



From jhaydon at snf.stanford.edu  Thu Jan  4 12:59:02 2007
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Thu, 4 Jan 2007 12:59:02 -0800
Subject: Shutdown innotec SNF 2007-01-04 12:59:02: chiller is dead 
Message-ID: <mailman.637.1357938402.25732.innotec-pcs@snf.stanford.edu>

I have called the manufacture for infor and parts probably wont be up until next early part of next week



From jhaydon at snf.stanford.edu  Wed Jan 10 10:19:11 2007
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Wed, 10 Jan 2007 10:19:11 -0800
Subject: Shutdown innotec SNF 2007-01-04 12:59:02: chiller is dead 
Message-ID: <mailman.638.1357938402.25732.innotec-pcs@snf.stanford.edu>

installed new chiller 



From jhaydon at snf.stanford.edu  Wed Jan 10 10:20:15 2007
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Wed, 10 Jan 2007 10:20:15 -0800
Subject: Problem innotec SNF 2007-01-03 21:21:23: interlock error
Message-ID: <mailman.639.1357938402.25732.innotec-pcs@snf.stanford.edu>

water flow stopped because chiller died installed new chiller



From jhaydon at snf.stanford.edu  Thu Jan 11 15:44:55 2007
From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu)
Date: Thu, 11 Jan 2007 15:44:55 -0800
Subject: Problem innotec SNF 2007-01-11 15:44:54: new chiller
Message-ID: <mailman.640.1357938402.25732.innotec-pcs@snf.stanford.edu>

"new "used chiller has not been completely tested may have some temperature stability problems but should be ok to use.



From nitigoel at snf.stanford.edu  Wed Jan 17 19:44:56 2007
From: nitigoel at snf.stanford.edu (nitigoel at snf.stanford.edu)
Date: Wed, 17 Jan 2007 19:44:56 -0800
Subject: Comment innotec SNF 2007-01-17 19:44:55: Ge target is not coming out of the crucible
Message-ID: <mailman.641.1357938402.25732.innotec-pcs@snf.stanford.edu>

the germanium target is still inside the chamber



From ratiug at snf.stanford.edu  Thu Jan 18 15:40:56 2007
From: ratiug at snf.stanford.edu (ratiug at snf.stanford.edu)
Date: Thu, 18 Jan 2007 15:40:56 -0800
Subject: Problem innotec SNF 2007-01-18 15:40:56: noisy when lowering the bell jar chamber down
Message-ID: <mailman.642.1357938402.25732.innotec-pcs@snf.stanford.edu>




From oisaadat at snf.stanford.edu  Mon Jan 22 22:55:44 2007
From: oisaadat at snf.stanford.edu (oisaadat at snf.stanford.edu)
Date: Mon, 22 Jan 2007 22:55:44 -0800
Subject: Problem innotec SNF 2007-01-22 22:55:43: Crucible Rotation Squeaking
Message-ID: <mailman.643.1357938402.25732.innotec-pcs@snf.stanford.edu>

While rotating between the different crucibles, the mechanism was squeaking.



From jperez at snf.stanford.edu  Wed Jan 24 08:04:04 2007
From: jperez at snf.stanford.edu (jperez at snf.stanford.edu)
Date: Wed, 24 Jan 2007 08:04:04 -0800
Subject: Comment innotec SNF 2007-01-17 19:44:55: Ge target is not coming out of the crucible
Message-ID: <mailman.644.1357938402.25732.innotec-pcs@snf.stanford.edu>

Removed Ge starter source with a smaller tool.