From jperez at snf.stanford.edu Mon Aug 4 13:00:12 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 4 Aug 2008 13:00:12 -0700 Subject: Comment innotec SNF 2008-08-04 13:00:11: Removed Aluminum starter source Message-ID: It has a growth on the bottom and may not sit well enough in the pocket to keep cool. Have to order another one. From jperez at snf.stanford.edu Fri Aug 8 07:23:14 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 8 Aug 2008 07:23:14 -0700 Subject: Shutdown innotec SNF 2008-08-08 07:23:14: Innotec in Regen Message-ID: From jperez at snf.stanford.edu Fri Aug 8 12:01:45 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 8 Aug 2008 12:01:45 -0700 Subject: Shutdown innotec SNF 2008-08-08 07:23:14: Innotec in Regen Message-ID: Regen completed! From jperez at snf.stanford.edu Fri Aug 8 12:03:06 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 8 Aug 2008 12:03:06 -0700 Subject: Comment innotec SNF 2008-08-04 13:00:11: Removed Aluminum starter source Message-ID: Damaged starter source has been replaced with my Qual test Aluminum starter source. Only used 5 times. From ericp at snf.stanford.edu Sat Aug 9 23:05:28 2008 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Sat, 9 Aug 2008 23:05:28 -0700 Subject: Problem innotec SNF 2008-08-09 23:05:27: cannot turn on HV Message-ID: HV will not come on, despite all interlock lights indicating "ok". As far as I can tell, it's not usable, but I am leaving in problem status in case anyone else wants to try. From jhaydon at snf.stanford.edu Mon Aug 11 08:08:08 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 11 Aug 2008 08:08:08 -0700 Subject: Problem innotec SNF 2008-08-09 23:05:27: cannot turn on HV Message-ID: HV working now may have been a short in the gun From eunji at snf.stanford.edu Mon Aug 18 06:41:12 2008 From: eunji at snf.stanford.edu (eunji at snf.stanford.edu) Date: Mon, 18 Aug 2008 06:41:12 -0700 Subject: Problem innotec SNF 2008-08-18 06:41:11: chamber pressure Message-ID: after 1hr 30 m pumping, the chamber pressure was still 1.2e-5... please check the chamber pressure before you use From jhaydon at snf.stanford.edu Mon Aug 18 16:37:41 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 18 Aug 2008 16:37:41 -0700 Subject: Problem innotec SNF 2008-08-18 16:37:40: cryo in regen Message-ID: ok to use when cycle is complete about 7:30 pm or so From jperez at snf.stanford.edu Tue Aug 19 07:03:30 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 19 Aug 2008 07:03:30 -0700 Subject: Problem innotec SNF 2008-08-18 06:41:11: chamber pressure Message-ID: I cleaned the o-ring that had some metal on it. The next user cleaned up the chamber, which was in need. Please do your part in cleaning up after yourselves. After this the system pump down took 1 1/2 hours. From jperez at snf.stanford.edu Tue Aug 19 07:07:00 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 19 Aug 2008 07:07:00 -0700 Subject: Problem innotec SNF 2008-08-18 16:37:40: cryo in regen Message-ID: Regen completed after power outage. From jimkruger at snf.stanford.edu Tue Aug 19 11:18:00 2008 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Tue, 19 Aug 2008 11:18:00 -0700 Subject: Comment innotec SNF 2008-08-19 11:18:00: no Rotation--now fixed Message-ID: The planetary rotation pin had fallen out, Maurice replaced it. OK now. From maurice at snf.stanford.edu Wed Aug 27 13:23:47 2008 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 27 Aug 2008 13:23:47 -0700 Subject: Comment innotec SNF 2008-08-27 13:23:47: Ag starter added to box Message-ID: From maurice at snf.stanford.edu Wed Aug 27 13:28:17 2008 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Wed, 27 Aug 2008 13:28:17 -0700 Subject: Comment innotec SNF 2008-08-27 13:28:16: added 30 Au pellets to box Message-ID: From nppatil at snf.stanford.edu Wed Aug 27 17:56:20 2008 From: nppatil at snf.stanford.edu (nppatil at snf.stanford.edu) Date: Wed, 27 Aug 2008 17:56:20 -0700 Subject: Problem innotec SNF 2008-08-27 17:56:20: planetary doesn't work Message-ID: it doesn't spin! From cbaxter at snf.stanford.edu Wed Aug 27 19:35:22 2008 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Wed, 27 Aug 2008 19:35:22 -0700 Subject: Problem innotec SNF 2008-08-27 17:56:20: planetary doesn't work Message-ID: The detent pin fell off, installed pin back and tighten the set screw. From arguicha at snf.stanford.edu Fri Aug 29 01:06:02 2008 From: arguicha at snf.stanford.edu (arguicha at snf.stanford.edu) Date: Fri, 29 Aug 2008 01:06:02 -0700 Subject: Problem innotec SNF 2008-08-29 01:06:02: Planetary doesn't work. Pin fell out. Message-ID: Planetary doesn't rotate, so system is virtually unuseable. Previous user should have reported on CORAL! From chen0622 at snf.stanford.edu Fri Aug 29 10:59:09 2008 From: chen0622 at snf.stanford.edu (chen0622 at snf.stanford.edu) Date: Fri, 29 Aug 2008 10:59:09 -0700 Subject: Problem innotec SNF 2008-08-29 10:59:08: Plantary could not rotate Message-ID: From chen0622 at snf.stanford.edu Fri Aug 29 11:12:39 2008 From: chen0622 at snf.stanford.edu (chen0622 at snf.stanford.edu) Date: Fri, 29 Aug 2008 11:12:39 -0700 Subject: Shutdown innotec SNF 2008-08-29 11:12:38: Message-ID: From maurice at snf.stanford.edu Fri Aug 29 11:24:19 2008 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 29 Aug 2008 11:24:19 -0700 Subject: Shutdown innotec SNF 2008-08-29 11:12:38: Message-ID: The planetary rotation pin had fallen out, Maurice replaced it. OK now. From maurice at snf.stanford.edu Fri Aug 29 11:25:00 2008 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 29 Aug 2008 11:25:00 -0700 Subject: Problem innotec SNF 2008-08-29 10:59:08: Plantary could not rotate Message-ID: rotation pin had fallen out, replaced pin, tightened setscrew From maurice at snf.stanford.edu Fri Aug 29 11:25:16 2008 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Fri, 29 Aug 2008 11:25:16 -0700 Subject: Problem innotec SNF 2008-08-29 01:06:02: Planetary doesn't work. Pin fell out. Message-ID: rotation pin had fallen out, replaced pin, tightened setscrew From chen0622 at snf.stanford.edu Sat Aug 30 04:02:09 2008 From: chen0622 at snf.stanford.edu (chen0622 at snf.stanford.edu) Date: Sat, 30 Aug 2008 04:02:09 -0700 Subject: Problem innotec SNF 2008-08-30 04:02:09: Interlock WFS1 Message-ID: the interlock WFS1 shown during the deposition. The gold target is stuck in the crucible after deposition.