From jperez at snf.stanford.edu Thu Jul 3 07:06:30 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 3 Jul 2008 07:06:30 -0700 Subject: Shutdown innotec SNF 2008-07-03 07:06:30: Down for Cryo Regen Message-ID: From eenriquez at snf.stanford.edu Thu Jul 3 12:29:35 2008 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 3 Jul 2008 12:29:35 -0700 Subject: Shutdown innotec SNF 2008-07-03 07:06:30: Down for Cryo Regen Message-ID: Regen completed. From jperez at snf.stanford.edu Thu Jul 3 13:24:20 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 3 Jul 2008 13:24:20 -0700 Subject: Problem innotec SNF 2008-06-30 21:57:07: Dep rate display Message-ID: Crystal should of been changed after deposition was completed. Gordan found flakes/peeling on Crystal holder. From jimkruger at snf.stanford.edu Thu Jul 3 20:09:57 2008 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Thu, 3 Jul 2008 20:09:57 -0700 Subject: Problem innotec SNF 2008-07-03 20:09:57: Intermittant crystal Message-ID: Intermittant crystal. Had to finish deposition by guessing time. I found flaking on face of crystal mount. I could not find a clean one so I scraped and polished at the old one and installed it with a new crystal. From jimkruger at snf.stanford.edu Thu Jul 3 20:11:27 2008 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Thu, 3 Jul 2008 20:11:27 -0700 Subject: Problem innotec SNF 2008-07-03 20:11:27: Tin crucible liner stuck in pocket 6 Message-ID: Tin crucible liner stuck in pocket 6. Sorry. I hope no one needs pockt 6 until monday. From jperez at snf.stanford.edu Mon Jul 7 07:10:00 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 7 Jul 2008 07:10:00 -0700 Subject: Problem innotec SNF 2008-07-03 20:09:57: Intermittant crystal Message-ID: Their is a jar with the other metal jars in the box. The jar is labeled "Clear crystal holders. The last time I put the clean ones in the jar, there was a total of 3 clean crystal holders in this jar. From ahazeghi at snf.stanford.edu Tue Jul 8 21:53:43 2008 From: ahazeghi at snf.stanford.edu (ahazeghi at snf.stanford.edu) Date: Tue, 8 Jul 2008 21:53:43 -0700 Subject: Shutdown innotec SNF 2008-07-08 21:53:42: cryopump T=271K Message-ID: Cryopump temprature too high From jhaydon at snf.stanford.edu Wed Jul 9 07:04:18 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 9 Jul 2008 07:04:18 -0700 Subject: Shutdown innotec SNF 2008-07-08 21:53:42: cryopump T=271K Message-ID: temp ok now From jimkruger at snf.stanford.edu Wed Jul 9 17:28:52 2008 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Wed, 9 Jul 2008 17:28:52 -0700 Subject: Comment innotec SNF 2008-07-09 17:28:52: Splattered Ni source, changed shutter Message-ID: Sorry. splattered under shutter, deposition was OK. Ni source will need added Ni From hailiang at snf.stanford.edu Fri Jul 11 21:11:09 2008 From: hailiang at snf.stanford.edu (hailiang at snf.stanford.edu) Date: Fri, 11 Jul 2008 21:11:09 -0700 Subject: Problem innotec SNF 2008-07-11 21:11:09: power off light was not lit Message-ID: From jperez at snf.stanford.edu Mon Jul 14 07:14:28 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 14 Jul 2008 07:14:28 -0700 Subject: Comment innotec SNF 2008-07-09 17:28:52: Splattered Ni source, changed shutter Message-ID: Replaced Ni starter source. From jhaydon at snf.stanford.edu Mon Jul 14 07:16:06 2008 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 14 Jul 2008 07:16:06 -0700 Subject: Problem innotec SNF 2008-06-26 17:45:35: walls starting to flake Message-ID: this is really a comment From jperez at snf.stanford.edu Thu Jul 17 07:06:56 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 17 Jul 2008 07:06:56 -0700 Subject: Shutdown innotec SNF 2008-07-17 07:06:55: Dirty peeling Parts being changed out Message-ID: From jperez at snf.stanford.edu Thu Jul 17 16:19:20 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 17 Jul 2008 16:19:20 -0700 Subject: Shutdown innotec SNF 2008-07-17 07:06:55: Dirty peeling Parts being changed out Message-ID: Shields/ shutter and all other parts have been changed and coated. nnpatil is running the test. Will read t.w.'s tomorrow. From jperez at snf.stanford.edu Thu Jul 17 16:19:41 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 17 Jul 2008 16:19:41 -0700 Subject: Problem innotec SNF 2008-07-11 21:11:09: power off light was not lit Message-ID: OK now! From jperez at snf.stanford.edu Thu Jul 17 16:20:27 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 17 Jul 2008 16:20:27 -0700 Subject: Problem innotec SNF 2008-07-03 20:11:27: Tin crucible liner stuck in pocket 6 Message-ID: Tin has been removed. No tin for now, until discuss with Ed. From jperez at snf.stanford.edu Thu Jul 17 16:21:42 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 17 Jul 2008 16:21:42 -0700 Subject: Problem innotec SNF 2008-07-17 16:21:41: Running test wafers will read tomorrow Message-ID: If you want to wait until tomorrow's measurement wait. Alum shinny. From jperez at snf.stanford.edu Fri Jul 18 10:01:32 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 18 Jul 2008 10:01:32 -0700 Subject: Problem innotec SNF 2008-07-17 16:21:41: Running test wafers will read tomorrow Message-ID: Test wafer good, target 1000 A of Alum. Average 1090A. From jperez at snf.stanford.edu Fri Jul 18 10:06:10 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 18 Jul 2008 10:06:10 -0700 Subject: Problem innotec SNF 2008-07-18 10:06:08: Last clean shutter in Innotec Message-ID: This shutter has lumps from vendor after clean. They are hard and won't come off (just looks bad). All others are at vendor getting clean. You'll need to clean this one up during the weekend if it starts to peel. Lost one shutter with hole and one shutter is missing. From jperez at snf.stanford.edu Mon Jul 21 14:59:11 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 21 Jul 2008 14:59:11 -0700 Subject: Problem innotec SNF 2008-07-18 10:06:08: Last clean shutter in Innotec Message-ID: Clean shutters under the Innotec table. From jperez at snf.stanford.edu Tue Jul 22 11:41:57 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 22 Jul 2008 11:41:57 -0700 Subject: Problem innotec SNF 2008-07-22 11:41:57: Nickle has been removed Message-ID: There is a growth on the bottom of the Ni starter source. Maintenance will try and remove it. From jperez at snf.stanford.edu Mon Jul 28 07:15:29 2008 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 28 Jul 2008 07:15:29 -0700 Subject: Problem innotec SNF 2008-07-22 11:41:57: Nickle has been removed Message-ID: Nickle starter source has been repaired, cleaned and is back in it's jar.