From jperez at snf.stanford.edu Thu Jan 7 14:11:18 2010 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 7 Jan 2010 14:11:18 -0800 Subject: Problem innotec SNF 2010-01-07 14:11:18: Gold starter source damaged Message-ID: I pulled the Gold source. Does NOT fit correctly in C5 pocket. There will be no Gold tonight! From jperez at snf.stanford.edu Mon Jan 11 07:01:48 2010 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 11 Jan 2010 07:01:48 -0800 Subject: Problem innotec SNF 2010-01-07 14:11:18: Gold starter source damaged Message-ID: Starter source repaired, thanks Jim H. From aneesh at snf.stanford.edu Thu Jan 14 19:05:02 2010 From: aneesh at snf.stanford.edu (aneesh at snf.stanford.edu) Date: Thu, 14 Jan 2010 19:05:02 -0800 Subject: Problem innotec SNF 2010-01-14 19:05:01: current source failure Message-ID: same as reported by arash. beam went down during deposition first time, was able to recover From jimkruger at snf.stanford.edu Fri Jan 15 17:12:28 2010 From: jimkruger at snf.stanford.edu (jimkruger at snf.stanford.edu) Date: Fri, 15 Jan 2010 17:12:28 -0800 Subject: Problem innotec SNF 2010-01-15 17:12:27: Current source drips out Message-ID: Current source drips out for no apparent reason, no vacuum or other glitch. Happened 3 times but re-starts OK by following gun start up procedure. From sgchong at snf.stanford.edu Mon Jan 18 14:59:51 2010 From: sgchong at snf.stanford.edu (sgchong at snf.stanford.edu) Date: Mon, 18 Jan 2010 14:59:51 -0800 Subject: Comment innotec SNF 2010-01-18 14:59:51: Pt source doesn't fit in crucible well Message-ID: Pt source has a pellet sticking out, making it difficult to fit into the crucible. From maurice at snf.stanford.edu Tue Jan 19 09:49:47 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 19 Jan 2010 09:49:47 -0800 Subject: Shutdown innotec SNF 2010-01-19 09:49:47: needs regen after power outage Message-ID: From jperez at snf.stanford.edu Tue Jan 19 11:21:01 2010 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 19 Jan 2010 11:21:01 -0800 Subject: Problem innotec SNF 2009-11-21 09:00:23: source cuts out Message-ID: Recommend bring power up slowly. From jperez at snf.stanford.edu Tue Jan 19 11:22:07 2010 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 19 Jan 2010 11:22:07 -0800 Subject: Problem innotec SNF 2009-12-05 05:02:12: cause error Message-ID: Was repaired, but need more information when it happens again. From jperez at snf.stanford.edu Tue Jan 19 13:03:16 2010 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 19 Jan 2010 13:03:16 -0800 Subject: Shutdown innotec SNF 2010-01-19 09:49:47: needs regen after power outage Message-ID: Regen complete, at 14K From jperez at snf.stanford.edu Tue Jan 19 13:59:33 2010 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 19 Jan 2010 13:59:33 -0800 Subject: Comment innotec SNF 2010-01-18 14:59:51: Pt source doesn't fit in crucible well Message-ID: Filed excess Pt metal on edge (side) of starter source. From ajamo at snf.stanford.edu Sat Jan 30 19:05:42 2010 From: ajamo at snf.stanford.edu (ajamo at snf.stanford.edu) Date: Sat, 30 Jan 2010 19:05:42 -0800 Subject: Problem innotec SNF 2010-01-30 19:05:41: Au source a bit thin, only 2 pellets left Message-ID: I melted 6 pellets in the Au source but it is still on the thin side. only 2 more Au pellets left in the baggie. From maurice at snf.stanford.edu Sun Jan 31 16:09:49 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Sun, 31 Jan 2010 16:09:49 -0800 Subject: Problem innotec SNF 2010-01-30 19:05:41: Au source a bit thin, only 2 pellets left Message-ID: 39 Au pellets added to the box