From jasonlin at snf.stanford.edu Wed Feb 2 02:18:18 2011 From: jasonlin at snf.stanford.edu (jasonlin at snf.stanford.edu) Date: Wed, 2 Feb 2011 02:18:18 -0800 Subject: Problem innotec SNF 2011-02-02 02:18:17: Cut bank fan during dep Message-ID: High voltage cut back fan flickers during deposition (causing HV to drop momentarily). Deposition was otherwise fine. From jperez at snf.stanford.edu Fri Feb 4 10:12:31 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 4 Feb 2011 10:12:31 -0800 Subject: Comment innotec SNF 2011-01-31 16:25:28: Need more Au pellets Message-ID: I'll be melting down the Gold and Pt starter sources, so you'll not see pellets in the jar. Weigh before and after deposition and log on log sheet. From jperez at snf.stanford.edu Fri Feb 4 10:13:12 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 4 Feb 2011 10:13:12 -0800 Subject: Comment innotec SNF 2011-01-24 11:16:29: Crystal plate Message-ID: Jim Haydon replace the missing screws. From jperez at snf.stanford.edu Fri Feb 4 10:14:09 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 4 Feb 2011 10:14:09 -0800 Subject: Comment innotec SNF 2011-01-19 17:47:11: planetary touching frame Message-ID: Jim re-aligned planetary, OK now. From jperez at snf.stanford.edu Fri Feb 4 10:16:08 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 4 Feb 2011 10:16:08 -0800 Subject: Comment innotec SNF 2011-01-12 13:07:27: Innotec vac dump Message-ID: Regen the Cryo pump and haven't seen a problem in 23 days. From jperez at snf.stanford.edu Fri Feb 4 11:35:50 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 4 Feb 2011 11:35:50 -0800 Subject: Problem innotec SNF 2011-02-02 02:18:17: Cut bank fan during dep Message-ID: I turned off the Bias and brought power up slow, some flashing, but nothing out of the normal. From khu834 at snf.stanford.edu Sun Feb 6 19:36:44 2011 From: khu834 at snf.stanford.edu (khu834 at snf.stanford.edu) Date: Sun, 6 Feb 2011 19:36:44 -0800 Subject: Comment innotec SNF 2011-02-06 19:36:43: Au pellet Message-ID: Need Au pellets From elibol at snf.stanford.edu Thu Feb 10 13:49:51 2011 From: elibol at snf.stanford.edu (elibol at snf.stanford.edu) Date: Thu, 10 Feb 2011 13:49:51 -0800 Subject: Problem innotec SNF 2011-02-10 13:49:50: Pt Target Splashed and Viewport film out Message-ID: Pt target splashed during warmup - suddenly saw very high power andheard beeping possibly due to controlling getting stuck. No Pt target - apologies to all Pt users. Also no film in the viewport... From zguo at snf.stanford.edu Thu Feb 10 18:33:51 2011 From: zguo at snf.stanford.edu (zguo at snf.stanford.edu) Date: Thu, 10 Feb 2011 18:33:51 -0800 Subject: Problem innotec SNF 2011-02-10 18:33:50: Film can not be rotated Message-ID: The rotation film for the observing window can not be rotated. From jperez at snf.stanford.edu Fri Feb 11 05:49:58 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 11 Feb 2011 05:49:58 -0800 Subject: Comment innotec SNF 2011-02-06 19:36:43: Au pellet Message-ID: I will do the adding/melting of Au and Pt pellets. From jperez at snf.stanford.edu Fri Feb 11 10:47:46 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 11 Feb 2011 10:47:46 -0800 Subject: Problem innotec SNF 2011-02-10 18:33:50: Film can not be rotated Message-ID: Replaced film. OK to use From jperez at snf.stanford.edu Fri Feb 11 10:49:21 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 11 Feb 2011 10:49:21 -0800 Subject: Problem innotec SNF 2011-02-10 13:49:50: Pt Target Splashed and Viewport film out Message-ID: Replaced Pt starter source, please weigh before and after use. First time used, will take a while to break through the surface. From dongrip at snf.stanford.edu Sun Feb 13 21:36:29 2011 From: dongrip at snf.stanford.edu (dongrip at snf.stanford.edu) Date: Sun, 13 Feb 2011 21:36:29 -0800 Subject: Comment innotec SNF 2011-02-13 21:36:28: need Al pellets Message-ID: no Al pellets are in the pocket. Some Al-look-like pellets are in the metal source box, but I'm not sure if those are surely Al or not. From jperez at snf.stanford.edu Mon Feb 14 10:36:00 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 14 Feb 2011 10:36:00 -0800 Subject: Comment innotec SNF 2011-02-13 21:36:28: need Al pellets Message-ID: Replace baggy and added Al pellets. From yhngchen at snf.stanford.edu Mon Feb 21 18:54:28 2011 From: yhngchen at snf.stanford.edu (yhngchen at snf.stanford.edu) Date: Mon, 21 Feb 2011 18:54:28 -0800 Subject: Problem innotec SNF 2011-02-21 18:54:28: No e-beam Message-ID: No e-beam seen even raise the power to 8%. Please Iet me know if the instrument is still usable. From jperez at snf.stanford.edu Tue Feb 22 15:07:04 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 22 Feb 2011 15:07:04 -0800 Subject: Problem innotec SNF 2011-02-21 18:54:28: No e-beam Message-ID: User saw some light, so there was e-beAM. The Cu starter source is new and it just needed to be conditioned more. The next User on the same day didn'thave a problem. From hrleebh at snf.stanford.edu Fri Feb 25 23:44:35 2011 From: hrleebh at snf.stanford.edu (hrleebh at snf.stanford.edu) Date: Fri, 25 Feb 2011 23:44:35 -0800 Subject: Problem innotec SNF 2011-02-25 23:44:34: Au pellets are needed!! Message-ID: We need more Au pellets. The current weight is 56g for the reference. From jperez at snf.stanford.edu Mon Feb 28 08:26:39 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 28 Feb 2011 08:26:39 -0800 Subject: Problem innotec SNF 2011-02-25 23:44:34: Au pellets are needed!! Message-ID: I will replenish the Au starter source today. From jperez at snf.stanford.edu Mon Feb 28 13:58:19 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 28 Feb 2011 13:58:19 -0800 Subject: Shutdown innotec SNF 2011-02-28 13:58:19: No High Voltage coming on Message-ID: From jperez at snf.stanford.edu Mon Feb 28 15:12:52 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 28 Feb 2011 15:12:52 -0800 Subject: Shutdown innotec SNF 2011-02-28 13:58:19: No High Voltage coming on Message-ID: No High voltage, E-gun shorted. Pressure high due to peeling on O-ring;. OK now