From cave at snf.stanford.edu Fri Sep 2 08:54:52 2011 From: cave at snf.stanford.edu (cave at snf.stanford.edu) Date: Fri, 2 Sep 2011 08:54:52 -0700 Subject: Comment innotec SNF 2011-09-02 08:54:52: Current Jump Message-ID: The beam current jumped from .04 to .09 when increasing power. Also the Ti deposited at a lower power than previous users. May not be an issue; just noting. From jperez at snf.stanford.edu Tue Sep 6 11:49:41 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 6 Sep 2011 11:49:41 -0700 Subject: Comment innotec SNF 2011-09-02 08:54:52: Current Jump Message-ID: I ran / operated system and didn't have or see a problem with current jumping. I ran three pumpdowns. From jperez at snf.stanford.edu Tue Sep 6 11:50:23 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 6 Sep 2011 11:50:23 -0700 Subject: Problem innotec SNF 2011-08-30 17:51:26: cut-back flashes too much Message-ID: I ran three pumpdowns today and didn't have a problem with cut back fan. From kcbalram at snf.stanford.edu Thu Sep 8 03:47:34 2011 From: kcbalram at snf.stanford.edu (kcbalram at snf.stanford.edu) Date: Thu, 8 Sep 2011 03:47:34 -0700 Subject: Problem innotec SNF 2011-09-08 03:47:34: Cryo Pump temperature is 17K Message-ID: From jperez at snf.stanford.edu Fri Sep 9 06:58:13 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 9 Sep 2011 06:58:13 -0700 Subject: Problem innotec SNF 2011-09-08 03:47:34: Cryo Pump temperature is 17K Message-ID: Temperature was at; 14K when I used it. From maurice at snf.stanford.edu Tue Sep 13 08:37:33 2011 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 13 Sep 2011 08:37:33 -0700 Subject: Shutdown innotec SNF 2011-09-13 08:37:32: replacing manifold Message-ID: From jhaydon at snf.stanford.edu Tue Sep 13 15:47:55 2011 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 13 Sep 2011 15:47:55 -0700 Subject: Shutdown innotec SNF 2011-09-13 08:37:32: replacing manifold Message-ID: new manifold installed From jhaydon at snf.stanford.edu Tue Sep 13 15:48:25 2011 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Tue, 13 Sep 2011 15:48:25 -0700 Subject: Problem innotec SNF 2011-08-12 11:32:27: Hissing sound, OK to use Message-ID: new manifold installed From yuxinz at snf.stanford.edu Tue Sep 13 22:33:24 2011 From: yuxinz at snf.stanford.edu (yuxinz at snf.stanford.edu) Date: Tue, 13 Sep 2011 22:33:24 -0700 Subject: Problem innotec SNF 2011-09-13 22:33:23: It does not pump down Message-ID: It says ' process aborted cover off ' after pressing pump only. From altamash at snf.stanford.edu Wed Sep 14 06:58:21 2011 From: altamash at snf.stanford.edu (altamash at snf.stanford.edu) Date: Wed, 14 Sep 2011 06:58:21 -0700 Subject: Shutdown innotec SNF 2011-09-14 06:58:21: Does not pump down Message-ID: System can not be used From altamash at snf.stanford.edu Wed Sep 14 07:06:45 2011 From: altamash at snf.stanford.edu (altamash at snf.stanford.edu) Date: Wed, 14 Sep 2011 07:06:45 -0700 Subject: Problem innotec SNF 2011-09-14 07:06:44: AU source low Message-ID: weight is 50.2g From jhaydon at snf.stanford.edu Wed Sep 14 07:21:52 2011 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 14 Sep 2011 07:21:52 -0700 Subject: Shutdown innotec SNF 2011-09-14 06:58:21: Does not pump down Message-ID: cabinet door was not screwed down correctly opened interlock I missed it when I checked the system out From jhaydon at snf.stanford.edu Wed Sep 14 07:24:31 2011 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Wed, 14 Sep 2011 07:24:31 -0700 Subject: Problem innotec SNF 2011-09-13 22:33:23: It does not pump down Message-ID: cabinet door was not correctly screwed down opened interlock I missed it when I checked the system out From yuxinz at snf.stanford.edu Wed Sep 14 16:39:48 2011 From: yuxinz at snf.stanford.edu (yuxinz at snf.stanford.edu) Date: Wed, 14 Sep 2011 16:39:48 -0700 Subject: Problem innotec SNF 2011-09-14 16:39:47: See arcing when depositing gold Message-ID: High voltage and depostion rate fluctuates a lot when arcing occurs From bapinaud at snf.stanford.edu Wed Sep 14 16:50:32 2011 From: bapinaud at snf.stanford.edu (bapinaud at snf.stanford.edu) Date: Wed, 14 Sep 2011 16:50:32 -0700 Subject: Problem innotec SNF 2011-09-14 16:50:31: Arcing & Au Source Message-ID: Did not deposit gold but noticed source is <50g with no spare pellets. Deposition proceeds normally at first but arcing at end resulted in an uneven deposition rate. From jhaydon at snf.stanford.edu Thu Sep 15 08:15:46 2011 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Thu, 15 Sep 2011 08:15:46 -0700 Subject: Comment innotec SNF 2011-08-19 12:29:46: pnuematic valves no langer available Message-ID: From jperez at snf.stanford.edu Fri Sep 16 11:49:59 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 16 Sep 2011 11:49:59 -0700 Subject: Problem innotec SNF 2011-09-14 16:50:31: Arcing & Au Source Message-ID: Many reasons for arcing, make sure pockets are clean, starter sources are health and sitting correctly in the pocket. From jperez at snf.stanford.edu Fri Sep 16 11:52:52 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 16 Sep 2011 11:52:52 -0700 Subject: Problem innotec SNF 2011-09-14 16:39:47: See arcing when depositing gold Message-ID: Gold level low, looking at previous User that ran Nickel. I ran two metals Ti/Al and no arcing occurred, everything stable. From jperez at snf.stanford.edu Fri Sep 16 11:53:28 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Fri, 16 Sep 2011 11:53:28 -0700 Subject: Problem innotec SNF 2011-09-14 07:06:44: AU source low Message-ID: OK to use.Replenished with pellets.