From vonjulie67 at yahoo.com Thu Feb 1 10:03:33 2007 From: vonjulie67 at yahoo.com (vonjulie67 at yahoo.com) Date: 1 Feb 2007 18:03:33 -0000 Subject: HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor Message-ID: <20070201180333.28771.qmail@util01.hj.scd.yahoo.com> Vuong (Von) Nguyen applied to the following job: Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com. ****Cover Letter**** Name: Vuong (Von) Nguyen Address: 2441 Middlefield Avenue Fremont, CA 94539 Job Title: Equipment Engineer Will Relocate? Y Experience Level:15 Work Auth: United States Primary Phone: 510-668-0457 Secondary Phone: Email: vonjulie67 at yahoo.com Minimum Annual Salary Requirement: $95,000 ******RESUME****** div.hj_sdc{ color: #000000; } div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;} /* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */ /* Forcing padding into the tag prevents the collapse. */ div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;} div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;} div.hj_sdc .Normal{ text-indent: 0pt; font-family: 'Times New Roman', 'Arial'; font-size: 10pt; text-decoration: none; } div.hj_sdc .Normal--Char{ font-family: 'Times New Roman', 'Arial'; font-size: 10pt; text-decoration: none; } VUONG (VON) DUC NGUYEN 2441 Middlefield Ave. Fremont, CA 94539 (H)(510) 668-0457 Vonjulie67 at Yahoo.com OBJECTIVE:   To obtain a position as Equipment Maintenance Supervisor. EXPERIENCE:     5/03-4/2006: International Rectifier, HEXFET, Temecula, CA. Equipment Engineer for PVD & Dry Etch. Responsibility for day-to- Day maintenance, problem troubleshooting, modifications and new & used equipment installation & training for techninicians group. Plan training matrix & certification program for 16 technicians.     1/98-5/03: Agilent Technology Inc., San Jose, CA. Senior Equipment Specialist for Etch & CVD& Sputtering New equipment installation team, coordinated PM schedules.     Problem troubleshooting & training technicians.       11/96-1/98: Toshiba America Inc., Sunnyvale, CA. Associate Equipment Engineer responsible for CVD & Etch & PVD equipments. Writing PM specs and procedures checklist for problem troubleshooting & performed day-to-day maintenance.     6/92-11/96: LSI Logics Inc., Milpitas, CA. Lead Maintenance Technician responsible for Varian 3290, AMAT PVD Endura system, Novellus Concept One Teos & Silane CVD.      Lam Rainbow Etchers, LAM 490 Auto Etcher.     6/88-6/92: Varian Associates, Palo Alto, CA. Field Service Engineer for Application Lab. Field installation & Support for Varian 3280/90 & M2000 PVD Sputtering Systems. EDUCATION 1983-1988: Bachelor of Science in Electronic Engineering from San Francisco State University, May 1988. AMAT P5000 CVD Operation & Maintenance Course AMAT Centura Etch Operation & Maintenance Course Novellus Concept One Operation & Maintenance Course LAM  Rainbow & TCP Etchers Operation & Maintenance Course LAM 490 Auto Etcher Operation & Maintenance Course LAM Alliance 9400 Operation & Maintenance Course Varian 3290 Electronics & Maintenance Course REFERENCE  Available upon request. *** If your email client does not support HTML, this resume may not be displayed correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: From marceloamota at yahoo.com Sat Feb 3 02:39:40 2007 From: marceloamota at yahoo.com (marceloamota at yahoo.com) Date: 3 Feb 2007 10:39:40 -0000 Subject: HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor Message-ID: <20070203103940.6294.qmail@util01.hj.scd.yahoo.com> Marcelo Mota applied to the following job: Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com. ****Cover Letter**** Name: Marcelo Mota Address: 3141 Heritage Valley Dr San Jose, CA 95148 Job Title: Electrical Equipment Design Engineer Will Relocate? N Experience Level:10 Work Auth: United States Primary Phone: 408-270-0529 Secondary Phone: Email: marceloamota at yahoo.com Minimum Annual Salary Requirement: $110,000 ******RESUME****** div.hj_sdc{ color: #000000; } div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;} /* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */ /* Forcing padding into the tag prevents the collapse. */ div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;} div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;} div.hj_sdc .Plain-0020Text{ text-indent: 0pt; font-family: 'Courier New', 'Arial'; font-size: 10pt; text-decoration: none; } div.hj_sdc .Plain-0020Text--Char{ font-family: 'Courier New', 'Arial'; font-size: 10pt; text-decoration: none; } Marcelo A. Mota 3141 Heritage Valley Dr., S.J., CA 95148-3812 408-270-0529 (H) e-mail: marceloamota at yahoo.com CAREER HORIZON Equipment Design Engineer, were I can apply my ten plus years of electrical equipment control and systems engineering/integration design experience from the semiconductor/disk drive industry with a company in the fore front of clean or renewable energies like yourselves. CAREER SUMMARY Broker,  Real Estate – Santa Clara County, CA 1/02-present. Learned the art and skill of delivering high class service to people investing in the most important purchase in their life, a home. Multitasking and orchestrating various third party services in real estate transactions via various forms of internet communications, fax, telephone and in person consultation. Learned invaluable negotiation skills with purchasers, sellers and their representatives. Utilized and exercised great listening skills, patience, and gentleman social respect in all communications and interactions with all people involved in transactions. Secured resolutions for win-win negotiations. Follow-up experience after successful transaction closure with celebrations. Real estate and loan process documentation and training. Small office network installation of hardware and software applications. Well versed in MS-Office Suite. Microbar Incorporated- Sunnyvale, CA 12/00-1/02. R & D Controls Engineer / Manufacturing Engineer - Electrical power distribution and PLC system control design of Bulk Chemical  Delivery equipment used in the semiconductor industry. Enchem waste water treatment plant start-up, electrical/controls team member. Electrical design of equipment with semi-auto and manual operation. Performed electrical designs of equipment according to the following electrical guides: NFP-79, and NEC NFP-70 code, CE (European Community), SEMI S2-0200.  Experience certifying equipment to CE and UL. Integration of systems based on relay logic, PLC logic, HMI ( Wonderware), Panel view on a PC platform with NT O/S. Experience with  power distribution of 120/208VAC, 200-240VAC 1,3 phase main power. Experienced with designing control circuits of 12, 24VDC. Integrated programmable logic controllers (PLC's), Allen Bradley SLC 500 into electrical designs. Utilized AutoCAD 14 to draft electrical schematics in ANSI. Assemble bill of materials (BOM) utilizing company MAX MRP system. Vendor interaction and qualification of new parts for product improvement, functionality and cost reductions. Manufacturing duties in various aspects of electrical production. Purchasing and inventory interaction. Utilize MS-Office  for communication, reports, cost analysis justifications, e-mail. Engineering field service phone support. Universal Systems Inc.- San Jose, CA 2/00-12/00 Electrical Automation Design Engineer III - Electrical power distribution and system control design of wet process capital equipment used in the semiconductor industry. Electrical design of equipment with fully-auto, semi-auto and manual operation. Performed electrical designs of equipment according to the following electrical guides: CE (European Community), SEMI S2-93, NFP-79, and NEC.  Experience certifying equipment to CE and UL. Integration of systems based on relay logic, PLC logic, motion control, and  HMI on a PC platform with NT O/S. Experience with  power distribution of 120/208VAC, 230/400VAC 1,2,3 phase main power. Experienced with designing control circuits of 24VDC/AC or 120VAC. Integrated programmable logic controllers (PLC's), Siemens S7, PLC Direct into electrical designs. Also gained experience integrating equipment with thermal units, motors, pumps, analog signals and third party equipment. Utilized AutoCAD 14 to draft electrical schematics in ANSI or IEC formats. Assemble bill of materials (BOM) utilizing company MRP system, MAS90, and  MS-Excel. Vendor interaction and qualification of new parts for product improvement, functionality and cost reductions. Manufacturing duties in various aspects of electrical production. Purchasing and inventory interaction. Utilize MS-Office 97 for communication, reports, and cost analysis justifications. Engineering field service phone support. EIP Microwave Inc. - San Jose, CA 5/98-2/99 Manufacturing Engineer – New product introduction NPI of microwave test equipment. NPI cross-functional reviews of prototype runs.  Review and release to vendor first article printed circuit boards PCB, BOM’s to purchasing. Direct communication with vendors of key product show stopper parts.  Inspection visits and tours of subcontract vendors. Improvement of methods and documentation in the transfer of new products from engineering prototype to a manufacturable product on schedule.  Responsible as liaison between engineering and manufacturing.  Access risks and develop contingency plans. Vendor subcontractor quality  improvement projects. Prepare engineering change notices ECN’s. Involved in successful RF Generator Mantec product introduction from concept, design, R&D to manufacturing. Proficient Microsoft Office applications user.  Utilized Platinum Enterprise Resource Planning (ERP) application. Technical writing of manufacturing procedures, manuals and multimedia  network documentation creation.  Create and update manufacturing organizational assembly flow chart for two product lines. Point contact for Hewlett Packard HP Gigahertz product line manufactured by EIP Microwave. Continuous improvement and support of HP products line.  Oversee incoming quality inspection of parts. Executed RMA for high profile subcontract parts of HP and Mantec products. Detailed oriented  and proficient with spreadsheets, word processing, presentation software, and project management software.  Performed hands-on manufacturing equipment repairs, maintenance or operation when needed.  Training for manufacturer assemblers MA on NPI. Subcontract manufacturing negotiations and continued relationship communications. Monitor the progress of all subcontractors. Conflict resolution, leadership and decision-making. Ultra Fab Technology - San Jose, CA 11/95-5/98 Electrical Design Engineer I / Control System Integrator - Complete electrical design of wet process capital equipment used for the semiconductor, flat-panel and disk-media production industry. Designs of poly and stainless steel fully-auto, semi-auto and manual wet process equipment. Electrical design of chemical dispense units. Design of high voltage, 120/208VAC-277/480VAC heater bath control circuits. Design 24VDC/AC machine control systems. Integrated programmable logic controllers (PLC's), GE Fanuc 90-30 and Allen Bradley SLC-500 PLC's to automate the control equipment. Integrated Allen Bradley DeviceNet and Ethernet TCP/IP Networks for dynamic data exchange. Mechanical design of graphic user operator interface consoles. Daily vendor interaction and qualification of new parts for product improvement, funcionality and cost reductions. Manufacturing duties in various aspects of electrical production. Purchasing and inventory interaction. Utilize MS-Office 97 for communication, reports, cost analysis justifications, engineering change notices reports and requests.  Engineering field service phone support. Customer interaction and communication. Documentation for assembly, standards and schematics. Utilized AutoCAD LT 2.0 to design electrical schematics and assemble bill of materials (BOM). Involved in the design of three new company capitol equipment products. Designed electrical systems to SEMI S2-93, NFP-79,  CE, Machine Safety and intrinsically safe guidelines. Control System Integrator   - Configure industrial PC’s with Microsoft Windows Workstation NT 4.0.  Install and configure network interface cards (NIC) with protocol TCP/IP. Integrate PC workstations with communication bus cards, motion control bus cards, network hub, and touch screen card hardware (HW)  Interrupt Request (IRQ) and memory address resolution configuration.  Software installation of motion control, touch screen, communication, human machine interface (HMI), and software development programs. Integrate PC workstation into semiconductor capitol equipment as a HMI control system of robotics, programmable logic controllers, and various third party equipment via RS-232 or DDE .   Responsible for all integration bill of materials (BOM) and purchase requests (PO). Komag Inc. - Milpitas, CA 11/92-10/95 Manufacturing Equipment Technician II - Retrofit and maintain large-scale capital equipment. Maintained a very large fully automated nickel plating process line for disk-media production. Utilized electro-mechanical skills to maintain robot thickness sorters. Monitored and maintained building waste treatment systems comprising of DI chiller, DI reverse osmosis system, and nickel ion exchange reclaim. Maintained three large semi-automated etch systems with robot load I/O buffers. Performed various machine shop skills. Maintenance documentation with Microsoft Office.  Participated in numerous manufacturing improvement teams. Siliconix Inc. - Santa Clara, CA 8/89-5/91 Associate Industrial Engineer & Production Control - Monitor wafer production control using PROMIS lot tracking software. Produced daily production flow reports and graphs for meetings which detailed starts, work-in process (WIP), back-end, scraps, finished goods, key production down-times. Evaluate chemical consumption data to lower operating costs.  Implemented consumable part tracking logbooks. Phased-out out dated maintenance spare parts. Interacted and negotiated with vendors to receive optimum pricing, quality parts and timely ordering to reduce down-time. Procurement and negotiating experience of acquiring capital equipment. IBM Almaden Research Center - San Jose, CA 1/88-5/89 Lab Assistant   Co-op- Search and procurement of motion control systems.  Designed, build and document motion control systems. Machine custom aluminum parts in model shop. Utilize CAD/CAM for designs. Write motion control programs in BASIC.  Skilled operator of lathe, vertical-mill, and drill press. EDUCATION Bachelor of Science Industrial Technology, Electronics & Computer Science, SJSU 1988 Minor Business Management, SJSU 1988 LANGUAUGES – Native language English. Speak & read Spanish. Learning Hindi LIFE ACTIVITIES – High Sierra Backpacking, YMCA Volunteer Youth Coach Basketball REFERENCES -  Available upon request *** If your email client does not support HTML, this resume may not be displayed correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: From rafabo4 at yahoo.com Mon Feb 5 11:26:33 2007 From: rafabo4 at yahoo.com (rafabo4 at yahoo.com) Date: 5 Feb 2007 19:26:33 -0000 Subject: HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor Message-ID: <20070205192633.13532.qmail@util01.hj.scd.yahoo.com> Henry Rafael applied to the following job: Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com. ****Cover Letter**** Name: Henry Rafael Address: 2477 Glen Duff Way San Jose, CA 95148 Job Title: Technician Will Relocate? Y Experience Level:10 Work Auth: United States Primary Phone: 408-813-5237 Secondary Phone: Email: rafabo4 at yahoo.com Minimum Annual Salary Requirement: Unspecified ******RESUME****** Henry Rafael 2477 Glen Duff Way San Jose CA. 95148 Contact: 408-813-5237 Email: hrafael at email.sjsu.edu Experience: Komag inc. 1990-1999 Position ??? Technician for sputter (vacuum) system ((Ulvac, Intevac, & Anelva)) - Perform PM???s (routine preventative maintenance to disk sputtering system) - Maintain, as needed, High vacuum components - Perform R&D upgrades to sputtering systems - Monitor system using (PLC) programmable Logic Control - Maintain Cryopumps / roots turbo pump vacuum technology (oil, filter, helium recharge, rebuild) - Repair / replace mechanical components as needed (high vacuum valves) - Rail Alignment (system runs on rails in vacuum as well as atmosphere) - Remove and install targets (targets are metal deposition process) - Troubleshoot system transportation and make schedule for repairs - Work in a class 10 cleanroom environment - Enter system problems to database / present to maintenance team - Pressure gauges - Electro-mechanic assembly - Generate ideas to increase production output / and improve process - Oscilloscope - Attend to meetings with automation / system control team - Provide 24 hour support to production and R&D. LSI Logic 2000 Position: Contract hire (tech training) Train on Varian implant system used to make wafers. Education: Evergreen Valley College 1999-2004 Earned 130 College units toward engineering degree. Some classes taken listed below. Engineering Process tools, Engineering drawing in ACAD, Materials, Calculus series, Differential Equations, Engineering Physics, Programming in C++, Chemistry, circuits, and Statistics. San Jose State University College of Engineering Earned 30 units toward Enginnering. Aproximately 23 units shy (or 2 semester)of B.A degree in Engineering. Some coarses taken listed. Dynamics, fluid dynamics, mehanics of materials, engineering economics, and numerical analysis. FCC (Federal Communications Commission) 1999 GROL License# PG-GB-062779 General Radiotelephone Operator License ???Master of Communications Technology??? award Komag Inc. Certificate of completion ???Vacuum Technology and Applications??? Skills: Excel, Word, AutoCAD, Matlab, PowerPoint, C++. Mathematically and mechanically inclined. Hobbies: Cars and cycling. Komag Inc. *1710 Automation Parkway San Jose CA. 95131 *408-576-2000 *** If your email client does not support HTML, this resume may not be displayed correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: From rescoto at techarmonic.com Tue Feb 6 12:34:25 2007 From: rescoto at techarmonic.com (rescoto at techarmonic.com) Date: 6 Feb 2007 20:34:25 -0000 Subject: HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor Message-ID: <20070206203425.26997.qmail@util01.hj.scd.yahoo.com> Rosendo Escoto applied to the following job: Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com. ****Cover Letter**** Febuary 06, 2006 Dear Sir/Madam, This letter is in reply to your advertisement in the Hotjobs.com for the position of Equipment Engineering maintenance Supervisor. I have a degree in Bachelor of Science in Aircraft Technology and more than 7 years of experience in field service service position. My present position is Field Service Manager which involves start-up, traveling all over the world to train new field service engineers and managing a service team. I am confident that my experience in semiconductor industry and education I can perform the above position effectively. Your interest and consideration are greatly appreciated. I look forward to see in person. Sincerely, Rosendo G. Escoto Name: Rosendo Escoto Address: 34843 Lilac Street Union City, CA 94587 Job Title: Field Service Manager Will Relocate? Y Experience Level:5 Work Auth: United States Primary Phone: 408-464-4851 Secondary Phone:408-360-8780 X403 Email: rescoto at techarmonic.com Minimum Annual Salary Requirement: Unspecified ******RESUME****** Rosendo Escoto 34843 Lilac Street Union City, CA 94587 Home: 408-464-4851 Work: 408-360-8780 X403 rescoto at techarmonic.com Objective To obtain a position within a growth oriented company where I could use my skills and experience to mutual advantage. Experience TecHarmonic Inc September 2005 - Present Field Service Manager San Jose, CA Manage all Field Service Engineers and Field Service Reps all over the world. Hire and Train new Field Service Engineers. Monitor all customers installed base. Perform Customer site training. Evaluate employees performance. TecHarmonic Inc January 1999 - September 2005 Sr. Field Service Engineer San Jose, CA Overall lead of the Field Service Department. Efficiently diagnose, perform repairs and maintenance on PLC controlled and Electro-Mechanical Equipments on site such as: Thermal-Wet scrubbers, Dry scrubbers and Water scrubbers. Provide technical assistance to customer maintenance personnel to solve complex problems. Train newly hired Field Service Engineers. Assist Research & Development department to improve and develop new products. Perform final calibration routines and machines start-up on site. Complete field service reports and associated documentation. Travel locally and internationally. Customers: · USA - Novellus, Fujitsu, WaferTech, Vishay Siliconix, Motorola, Bandwidth Semiconductor and Lucent Technologies. · ASIA - ST Microelectronics, Promos, TSMC, UMC and Seki. · Europe - ST Microelectronics Rousset (France, Catania), Phillips England, Tower Electronic-Israel, X-Fab Germany. ECOSYS Corporation April 1998 - December 1998 Field Support Engineer San Jose, CA Responsible for Novellus account. Perform preventive maintenance on wet, dry, and burn scrubbers. Document and report all daily activities i.e., machine repair, parts inventory, and all safety issues. And travel to customer's site if necessary. Advo Inc. September 1997 - March 1998 Lead Operations Technician Newark, CA Maintain, install, and troubleshoot inserter (Mueller Martini) equipments. Supervised all night shift technician and lead operators. Trained operators and technicians. Advo Inc. December 1993 - September 1997 Maintenance Mechanic Newark, CA Perform preventive maintenance and on all inserter equipments. Troubleshoot electrical and mechanical problems. Education PATTS College Of Aeronautics March 1986 Bachelor of Science Pasay City, Metro Manila Skills Computer Knowledge: Word, Excel, Powerpoint, Ability to read electrical schematic diagram. *** If your email client does not support HTML, this resume may not be displayed correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: From pavas0407 at yahoo.com Wed Feb 7 01:46:06 2007 From: pavas0407 at yahoo.com (pavas0407 at yahoo.com) Date: 7 Feb 2007 09:46:06 -0000 Subject: HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor Message-ID: <20070207094606.18585.qmail@util01.hj.scd.yahoo.com> Pavas Asthana applied to the following job: Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com. ****Cover Letter**** Dear Sir, Please find my resume for your kind consideration for the subject post. Please feel free to contact me for any clarifications needed. Thanking you, With best regards, Pavas Asthana. Name: Pavas Asthana Address: B1-42, First Floor, 1st Main Road, SFS 208, Yelahanka New Town Bangalore, 560064 Job Title: Service Manager Will Relocate? Y Experience Level:10 Work Auth: United States Primary Phone: +91-9845048994 Secondary Phone:+91-80-28564776 Email: pavas0407 at yahoo.com Minimum Annual Salary Requirement: $75,000 ******RESUME****** Pavas Asthana B1-42, First Floor, 1st Main Road, SFS 208, Yelahanka New Town Bangalore 560064 India Cell: +91-9845048994 Home: +91-80-28564776 pavas0407 at yahoo.com Objective · To make my organization grow with my sincere efforts and grow with the organization. Experience El Camino Technologies Pvt. Ltd. January 2002 - Present Service Manager Bangalore · Undertaking Installation, Commissioning and Maintenance contracts for the Wafer Fab equipments like Diffusion Furnace, Sputtering Machine, E-beam System, Photoresist Coater and Developer Wafer Tracks, Mask Aligners, Pattern Generator, Mask Stepper etc. Also undertake Annual Maintenance Contracts for these equipments. Usha (India) Ltd. November 1995 - November 2001 Manager (R & D, Wafer Fab) Faridabad, Haryana I joined Usha (India) Ltd. as a Management Trainee on 1st Nov. 1995. Since then I have been working there as Asstt. Manager, Deputy Manager and then as Manager. National Physical Laboratory January 1991 - October 1995 Research Associate New Delhi · I completed my M.S. degree in 1991 from BITS, Pilani (Rajasthan) India, working at National Physical Laboratory (NPL) under Distance Learning Program of BITS, Pilani. · I had been working at NPL since November 1988 as Junior Research Fellow (JRF), Senior Research Fellow (SRF) and as Research Associate (RA) after qualifying National Educational Test (NET), 1987. Education Govt. Science College, Jiwaji University, Gwalior 1983 Master of Science Gwalior, Madhya Pradesh Subjects: Physics, Chemistry, Mathematics Result: Passed; First Division; 65.65% Govt. Science College, Jiwaji University, Gwalior (M.P.) 1987 Gwalior, Madhya Pradesh Subject: Physics Result: Passed; First Division; 60.81% Birla Institute of Technology and Science 1991 Pilani, Rajasthan Subject: Physical Sciences Result: Passed; First Division; CGPA=8.00 Skills A. Research and Development: · Working at NPL, New Delhi, India, I gathered experience in the fabrication and characterization of High Temperature Superconductors. I also studied the effect of doping of d- and f- band materials on the properties of these superconductors. · Material Characterization techniques used by me include, X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electron Paramagnetic Resonance (EPR), Standard AC and DC Four Point Probe resistivity measurement, Magnetic Susceptibility etc. · Worked as a Research Associate (RA) at NPL in an NPL-TISCO project, I was involved in the synthesis of high silicon-steel by CVD technique. · I also fabricated a temperature-controlled furnace for multiple deposition and in-situ diffusion cycles for the above project. B. Industrial Experience: · Installation, commissioning and process optimization of Wafer Fab related equipments like Mask Aligners, Wafer Tracks, Pattern Generators, Mask Steppers, Vacuum Systems, Diffusion furnaces, Wafer Probers etc. · Vacuum Metallization Systems: Use, maintenance and process stabilization in Thermal Evaporation, Electron beam Evaporation, (15 kW), Multi-target Sputtering System (5kW). · Supervising the 100% wafer probing activity before transferring the finished (diffused) small signal transistor wafers to packaging division. · Developed new equipment required for production process and for R & D activities, most significant of these being Vacuum Alloying Furnace for alloying the high voltage high current diode (S-1107) chip to molebdenum disc. · Optimization of piece processes for subsequent implementation in production, · Development and optimization of Epitaxial growth of silicon over silicon substrate wafers of required electrical parameters. C. Computers: · Operating Systems known:Windows95/98, Windows NT, DOS, VAX/VMS, Unix. · Programming Languages known: BASIC, FORTRAN, PASCAL, COBOL, C/C++, Java. · Computer graphics: HPG, HG3, AutoCAD, CorelDraw. · Automatic Data Acquisition: Interfaced scientific instruments using IEEE-488 and RS-232 for automation of scientific experimental setups. · Others: Numerical methods, Signal recovery software like FFT, signal averaging and autocorrelation. Awards · Qualified NET after M.Sc. and received CSIR fellowship for research. · I have received appreciations for my significant contributions. I also bear the honour of being the Star Performer of my company. Publications Published in International Journals: 1. K.K. Saini, C.P. Sharma, S.N. Ekbote, Pavas Asthana, D.K. Suri, Chander Kant, S.A. Agnihotry and Subhas Chandra; "The Enhancement of Tc in Calcium Free Tl-Bilayer Superconducting System (Tl2Ba2Cu1Ox)"; Jpn. J. Appl. Phys. 29 (1990) 660. 2. K.K. Saini, C.P. Sharma, S.N. Ekbote, Pavas Asthana, D.K. Suri, K.C. Nagpal, Chander Kant and Subhas Chandra; "The Effect of High Temperature Sintering on the Tc of Tl1Ba2Can-1CunOx System"; Solid State Commun. 74 (1990) 789. 3. K.K. Saini, C.P. Sharma, S.N. Ekbote, D.K. Suri, Pavas Asthana, Chander Kant, K.C. Nagpal, S.A. Agnihotry and Subhas Chandra; "The Preparation of an Enhanced-Tc Superconducting Tl2Ba2CuOx Phase by Using Low Tl Concentrations"; J. Phys.: Condens. Matter 2 (1990) 6083. 4. K.K. Saini, C.P. Sharma, S.N. Ekbote, Pavas Asthana, D.K. Suri, Chander Kant, S.A. Agnihotry and Subhas Chandra; "Enhancement of Tc (~ 103 K) in Calcium-free Tl2Ba2CuOx (2201) Compound"; Bull. Mater. Sc. 14 (1990) 235. 5. Subhas Chandra, S.A. Agnihotry, Pavas Asthana, K.C. Nagpal, K.K. Saini, Chander Kant, C.P. Sharma and S.N. Ekbote; "The Effect of Long Annealing on Pb-Doped High Tc Bi-Sr-Ca-Cu-O Systems"; Phys. Status Solidi (a) 123 (1991) 269. 6. S.A. Agnihotry, K.K. Saini, Chander Kant, C.P. Sharma, S.N. Ekbote, P. Asthana, K.C. Nagpal and Subhas Chandra; "Pb-doped Electron Beam deposited Bi-Sr-Ca-Cu-O Superconducting Thin Films"; Thin Solid Films 198 (1991) 233. Presentations in Conferences: 7. K.K. Saini, C.P. Sharma, S.N. Ekbote, Pavas Asthana, D.K. Suri, Chander Kant, S.A. Agnihotry and Subhas Chandra; "Enhancement of Tc (~103 K) in Calcium-free Tl2Ba2CuOx (2201) Compound"; International Conference on Superconductivity,January 10 -14, 1990, Bangalore, India. 8. Pavas Asthana, S.N. Ekbote and Subhas Chandra; "The Effect of Nb on High Tc Superconductors - A Comparative Study"; Solid State Physics Symposium, 1 - 4 January 1992, Bombay, India. 9. Pavas Asthana, S.N. Ekbote, D.K. Suri and S. Chandra; "The Effect of Ce, Gd and Dy Doping on La1.85Sr0.15CuO4 Superconductor"; Material Research Society, Fall Meeting, Nov. 28 - Dec. 2, 1994, Boston, M.A. (Accepted for Poster Presentation). *** If your email client does not support HTML, this resume may not be displayed correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: From thomas72wong at yahoo.com Wed Feb 7 16:30:08 2007 From: thomas72wong at yahoo.com (thomas72wong at yahoo.com) Date: 8 Feb 2007 00:30:08 -0000 Subject: HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor Message-ID: <20070208003008.22353.qmail@util01.hj.scd.yahoo.com> Thomas Wong applied to the following job: Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com. ****Cover Letter**** Thomas Wong 776 Santa Maria Lane Foster City, CA 94404 (650) 867-9298 Dear Mr./ Ms. I am writing to express interest in the position of Equipment Engineer with Stanford University. I believe there is great opportunity with your company for an equipment engineer with my skills and ambition. I offer Over 9 years of experience in semiconductor manufacturing as Equipment Engineer and Facility Engineer. Solid experience and knowledge in fabrication equipment, such as epitaxy, ion implantation and other manufacturing and test equipments. Proven ability to establish and improve equipment processes that drive uptime and stability. Strong problem solving and analytical skills. Well versed in engineering with outstanding planning skills. An excellent team player and work well with diverse personalities. Well organized, hardworking, and persistent. Demonstrated ability to handle heavy workload and get jobs done well. Thank you for you r consideration of me for the position of Equipment Engineer with Stanford University. I believe my skills and experience match your requirements. Best regards, Name: Thomas Wong Address: 776 santa maria ln. Foster City, CA 94404 Job Title: Equipment Engineer Will Relocate? N Experience Level:5 Work Auth: United States Primary Phone: (650) 867-9298 Secondary Phone: Email: thomas72wong at yahoo.com Minimum Annual Salary Requirement: Unspecified ******RESUME****** div.hj_sdc{ color: #000000; } div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;} div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;} /* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */ /* Forcing padding into the tag prevents the collapse. */ div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;} div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;} div.hj_sdc .Normal{ text-align: justify; text-indent: 0pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Name{ margin-bottom: 22pt; text-align: center; text-indent: 0pt; line-height: 22pt; font-family: 'Garamond', 'Arial'; font-size: 22pt; text-decoration: none; text-transform: uppercase; letter-spacing: 4pt; } div.hj_sdc .Name--Char{ font-family: 'Garamond', 'Arial'; font-size: 22pt; text-decoration: none; text-transform: uppercase; letter-spacing: 4pt; } div.hj_sdc .Footer{ div.hj_sdc margin-top: 11pt; margin-bottom: 11pt; margin-left: 0pt; margin-right: 0pt; text-align: left; text-indent: 0pt; line-height: 12pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; text-transform: uppercase; } div.hj_sdc .Footer--Char{ font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; text-transform: uppercase; } div.hj_sdc .Hyperlink{ text-decoration: underline; color: #0000FF; } div.hj_sdc .Hyperlink--Char{ text-decoration: underline; color: #0000FF; } div.hj_sdc .Section-0020Title{ div.hj_sdc margin-top: 11pt; text-align: left; text-indent: 0pt; line-height: 11pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; font-weight: bold; text-decoration: none; text-transform: uppercase; letter-spacing: 0pt; } div.hj_sdc .Objective{ div.hj_sdc margin-top: 3pt; margin-bottom: 11pt; text-align: justify; text-indent: 0pt; line-height: 11pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Objective--Char{ font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Company-0020Name{ div.hj_sdc margin-top: 11pt; margin-left: 17pt; text-align: left; text-indent: -17pt; line-height: 11pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; font-weight: bold; text-decoration: none; } div.hj_sdc .Job-0020Title{ div.hj_sdc margin-top: 2pt; margin-bottom: 2pt; text-indent: 0pt; line-height: 11pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; font-style: italic; text-decoration: none; letter-spacing: 0pt; } div.hj_sdc .Job-0020Title--Char{ font-family: 'Garamond', 'Arial'; font-size: 11pt; font-style: italic; text-decoration: none; letter-spacing: 0pt; } div.hj_sdc .Body-0020Text{ margin-bottom: 11pt; text-align: justify; text-indent: 0pt; line-height: 12pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Body-0020Text--Char{ font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Achievement{ margin-bottom: 3pt; margin-left: 18pt; text-align: justify; text-indent: -18pt; line-height: 12pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Achievement--Char{ font-family: 'Garamond', 'Arial'; font-size: 11pt; text-decoration: none; } div.hj_sdc .Institution{ div.hj_sdc margin-top: 3pt; text-align: left; text-indent: 0pt; line-height: 11pt; font-family: 'Garamond', 'Arial'; font-size: 11pt; font-weight: bold; text-decoration: none; } Thomas Wong 776 Santa Maria Lane, Foster City, CA 94404 Phone (650) 867-9298 ? E-mail: thomas72wong at yahoo.com Objective   To obtain a position in Mechanical Engineering. Summary of Qualification   Over 9 years of experience in semiconductor manufacturing as Equipment Engineer and Facility Engineer. Solid experience and knowledge in fabrication equipment, such as epitaxy, ion implantation and other manufacturing and test equipments.  Proven ability to establish and improve equipment processes that drive uptime and stability.   Strong problem solving and analytical skills. Well versed in engineering with outstanding planning skills. An excellent team player and work well with diverse personalities. Well organized, hardworking, and persistent. Demonstrated ability to handle heavy workload and get jobs done well. Work experience   Analog Devices, Inc., Sunnyvale, CA 1997-2006 Senior Equipment Engineer                                                        In charge of production equipment in Epi and Ion Implant area. Responsible for equipment performance, improvement, upgrades, parts inventory, reliability and uptime, which are all critical for the success of the company’s manufacturing. Designed and developed improvement tools that resulted in reduced equipment down time. Developed troubleshooting guide with Process Engineer and Maintenance to improve equipment up time. Worked closely with MIS to develop automated process that increased productivity and decreased user errors. TQM (Total Quality Management) team member – Projects: Fab shutdown, Start up Plan, Epi Centura Team, and Year 2000 Team. Emergency Response Team member (ERT) since 1997 – Response to emergency incidences that cause injuries or damage to property and environment. Equipment  Engineer I and II Standardized preventive maintenance (PM) procedure, which resulted in equipment performance improvement. Responsible for AUTO CAD, Fabrication layout projects and successfully completed the concept design expansion, which resulted in increased Fabrication area. Project manager for the facilities installation and equipment release of process tools: Applied Materials Ion Implanter, Epi Centura and Advanced Semiconductor Materials (ASM) E2. Participated in Year 2000 Team – Responsible to ensure uninterrupted equipment availably for Epi and Implant area. Facilities Engineer I Managed contractor teams on the installation of process equipment. Coordinated and supervised the installation of semiconductor equipment in fab, such as: Novellus PECVD, Lam 590, Lam 4520, Fusion DUV, DNS 60A Coater & Developer, Gasonics Resist Asher, Laser Scribe, BOE sink, Aqua Regia Storage Cabinet modification and other Facilities work. Provided assistance for ISO 14000 certification and participated in water consumption team. University of Pacific, Stockton, CA  1996–1997 Mechanical Engineering Department Research Assistant Designed a six-legged walking robot to walk on non-planarized surface Participated in the study of Fuzzy Logic Control system to solve this new design challenge Constructed and built the six-legged robot. Performed position and force analysis using MATLAB software. E & A Automotive Repair Shop, San Mateo, CA 1994-1995 Technician Alarm installation and general automotive repair. Testing Office, College of San Mateo, San Mateo, CA 1993-1994 Proctor Design sample tests and performed general clerical work. Education   University of Pacific Stockton, CA  May 1997  BS, Mechanical Engineering. Training   Trained on: Applied Materials (AMAT) Epi 5200, ASM E2, AMAT Implant 9500, RECIF, AG Heatpulse 8108 semiconductor equipment, 2000 – 2006. Certified as an internal Emergency Response Team (ERT), 1998. Certified as an ISO 9000 Internal Quality Auditor, 1999. Certified for Total Quality Management (TQM), 2000. Computer skills   Adobe Photo Shop C++ Macintosh Adobe Premiere MS-Excel MATLAB Adobe Frame Maker MS-Project PROMIS Auto CAD MS-Power Point Task Management System Building Management System MS-Word Visio Awards received   “ Fab Shutdown/Startup Plan ”, TQM, Participation Award, November 2005 “ Epi Centura Team”, TQM, Special Achievement Award, Analog Devices, Inc., Feb 2004. “ Epi Centura Team ”, AQP, Team Excellence Award Finalist, May 2004. “ Year 2000 Team”, TQM, Gold Award, Analog Devices, Inc., Sep 1999 “ ADSV Cylinder Storage Upgrade Team ”, TQM,, Gold Award,  Analog Devices, Inc., Sep 1999 “A Robot that Learns to Walk”, Old Grad Oral Competition, second place, American Society of Mechanical Engineers, 1997. “ Harmonic Excitation due to Unbalance Mass”, Old Guard Presentation Competition, third place, ASME, 1996. languages English, Chinese (Cantonese, some Mandarin) Page of 2 *** If your email client does not support HTML, this resume may not be displayed correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: