HotJobs submission for 23501, Equipment Engineering Maintenance Supervisor

lbj14 at hotmail.com lbj14 at hotmail.com
Fri Jan 12 19:34:37 PST 2007


Lloyd Johnson applied to the following job:  Job ID: 23501, Equipment Engineering Maintenance Supervisor on HotJobs.com.

****Cover Letter****


Name:		Lloyd Johnson
Address:	2393 Lakeshore Rd
	 	
	 	Gilford, NH 03249
Job Title: 	ATSS
Will Relocate?	Y 
Experience Level:15
Work Auth:	United States
Primary Phone:	603-293-8299
Secondary Phone:603-677-2787
Email: 		lbj14 at hotmail.com 
Minimum Annual Salary Requirement: Unspecified 

******RESUME******

 
div.hj_sdc{ color: #000000; }
div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;}
/* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */
/* Forcing padding into the   tag prevents the collapse. */
div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc .Normal{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Normal--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .WP9-005fHeading1{
 text-indent: 0pt;
 font-family: 'Arial', 'Arial';
 font-size: 16pt;
 font-weight: bold;
 text-decoration: none;
}
div.hj_sdc .WP9-005fHeading1--Char{
 font-family: 'Arial', 'Arial';
 font-size: 16pt;
 font-weight: bold;
 text-decoration: none;
}
div.hj_sdc .small1{
 text-indent: 0pt;
 font-family: 'Verdana', 'Arial';
 font-size: 8pt;
 text-decoration: none;
}
div.hj_sdc .small1--Char{
 font-family: 'Verdana', 'Arial';
 font-size: 8pt;
 text-decoration: none;
}
div.hj_sdc .WP9-005fHyperlin{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: underline;
 color: #0000FF;
}
div.hj_sdc .WP9-005fHyperlin--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: underline;
 color: #0000FF;
}
div.hj_sdc .WP9-005fHeading-0020{
 text-indent: 0pt;
 font-family: 'Arial', 'Arial';
 font-size: 10pt;
 font-weight: bold;
 text-decoration: none;
}
div.hj_sdc .WP9-005fBody-0020Tex{
 text-indent: 0pt;
 font-family: 'Arial', 'Arial';
 font-size: 10pt;
 text-decoration: none;
}
 
 





    
  
    
  
    
  
   

  Lloyd B. Johnson  
   
  2393 Lakeshore Rd. #17    
  Gilford, NH 03249    
  
  (603) 293-8299    
  
   mailto:lbj14 at hotmail.com    
   Summary of qualifications   
  <  Knowledge of Varian, AMAT and Axcelis ion implanters,  
AMAT and Varian PVD,  Novellus PECVD, rapid thermal processors, 
diffusion furnaces, AMAT and LAM etchers, numerous test and measurement 
tools.    
  <  Possess a strong mechanical background and analytical 
problem solving skills.  
  <  Knowledge of SPC and best manufacturing processes.  
  <  Excellent customer relations skills.  
  <  Experience with high vacuum systems, including ion 
pumps, cryo pumps, turbo-molecular pumps, mechanical pumps, thermocouple, 
pirani and ionization gauges, leak detection.  
  <  Strong knowledge of computer systems, including PC 
hardware and operating systems, with A+ Hardware, OS, and Network+ certifications.  
  <  Understanding of radiation dosimetry, including ion 
chambers, solid state detectors, electrometer circuits, water phantoms 
and radiation survey instruments.  
  <  Knowledge of hazards and safety practices in RF and 
ionizing radiation, high voltage, toxic and corrosive gases and compounds.  
  <  Experience with velocity and position control DC servo 
circuits.  
    
   Employment     
    
   FAA Boston ARTCC     
   35 Northeastern Blvd.                       
Oct 2002-Present     
   Nashua, NH 03062     
   Maintain communications equipment used by the FAA 
in controlling air traffic, including microwave communications links, 
modems, ground to air radios, voice communications switches, weather 
monitoring and reporting equipment, channel switchers, routers, bridges 
and bandwidth management equipment.  Diagnosis and repair of issues 
brought by air traffic controllers, National Airspace Systems Manager 
and network operation control centers relating to transfer of voice 
and radar data between controllers, pilots, and remote sites.  
A significant accomplishment was acting as a facility focal point in 
the installation and evaluation of a GPS based navigation system used 
to implement free flight of commercial aviation at high altitudes, resulting 
in reduced cost to airlines and enhanced efficiency of air traffic controllers.   
   Ion Texas     
   2393 Lakeshore Rd.                          
July 2001-Oct 2002     
   Gilford, NH 03249     
   Worked with engineering and technical personnel at 
semiconductor plants, solar power equipment manufacturers and government 
laboratories nationwide.  One of the more successful contracts 
was an assignment at the Los Alamos National Lab, where I was able to 
contribute significantly to the improvement of beam currents from the 
H+ ion source of the Los Alamos Neutron Science Center (LANSCE) particle 
accelerator.  I was able to identify and locate the source of a 
virtual leak which was causing shortened source life and low beam currents.   
   Orion Equipment, Inc.     
   66 Cherry Hill Dr.                           
Feb 1996-July 2001     
   Beverly, MA 01915     
   As a member of a small research and development group, 
my primary function was to design, procure, build, operate and maintain 
an ion source test stand for development of advanced sources used in 
a new generation of ion implanters. In this position I utilized my knowledge 
of electronics, mechanical, vacuum and control systems to design and 
build equipment used by company scientists and engineers to develop 
new products and processes.  Some of my accomplishments were assisting 
in debugging and setup of PID control loops on the linear motors used 
to operate the scanning mechanism in the end station of the implanter, 
and experiments with varied materials and geometries to increase source 
life and ion beam output of DC and microwave sources being developed.   
   Cypress Semiconductor, Inc.     
   17 Cypress Blvd.                           
Aug 1988-Feb 1996     
   Round Rock, TX 78664     
   Sr. Equipment Technician in a semiconductor fabrication 
plant, doing maintenance, repair, and modification of complex capital 
equipment. This included Axcelis GSD, 8200 and 6200 ion implanters, 
AMAT 5500 Endura PVD, Novellus chemical vapor deposition, rapid thermal 
processors, scanning electron microscopes, and diffusion furnaces. Other 
responsibilities included training of junior and intermediate level 
technicians, acting as shift supervisor/group leader for 4-6 technicians. 
Used as a resource by engineering and production staff in diagnosing 
and resolving difficult and escalated process and equipment issues.      
  
   Perkin-Elmer SED     
   Wilton, CT                                           
Feb 1980-Aug 1988     
   Field Service Engineer for a manufacturer of deposition 
and etching equipment used in the semiconductor industry. Installed, 
serviced, and modified tools in semiconductor plants, universities, 
and research labs. Worked closely with engineering, sales, and marketing 
staff within the company as well as customer personnel. Conducted operation 
and maintenance training for customers in classroom and job settings. 
Managed accounts in a wide geographic area of the U.S., worked as needed 
to assist or fill in for other field service engineers throughout the 
U.S. and world.   
   Varian Associates Radiation Division   
 Palo Alto, 
CA                                      
1972-1980 
 Final Test 
Technician- final test and calibration of medical linear accelerators, 
utilizing knowledge of pulse forming networks, high voltage power supplies, 
standing wave and traveling wave accelerators using klystrons and magnetrons 
as RF sources.  Worked with radiation physicists and company engineers 
in dosimetry measurements and calibration of machines. 
  Education  
    
   Foothill College, Los Altos Hills, CA 2 years study 
in Biomedical Electronics.     
   St. Edwards University, Austin, TX 1 year in a Human 
Resource Management program.     
   U.S. Air Force, Keesler AFB, MS 52 weeks electronic 
fundamentals and radar theory.   
   Keywords: Field service, ion implanters, Axcelis, AMAT, Varian, Endura, 
Novellus, PECVD, CVD, high vacuum systems, SPC, computer applications, 
electronic circuitry troubleshooting, customer skills, oral and written 
communications skills, RF, high voltage, pneumatics, gas distribution 
systems, scanning electron microscopes, A+ and Net+ certification   





    




 


*** If your email client does not support HTML, this resume may not be displayed correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/jobs/attachments/20070113/c96901bc/attachment.html>


More information about the jobs mailing list