From rissman at stanford.edu  Fri Mar 23 11:20:05 2007
From: rissman at stanford.edu (Paul Rissman)
Date: Fri, 23 Mar 2007 11:20:05 -0700
Subject: Fwd: Re: Maintenance Supervisor Position
Message-ID: <200703231820.l2NIKBDP002126@smtp-roam.Stanford.EDU>

Hi John,

Can you check the e-mail address we had set up for the maintenance 
manager position?

Paul


>X-Sieve: CMU Sieve 2.3
>Delivered-To: rissman at stanford.edu
>X-Mailer: QUALCOMM Windows Eudora Version 6.2.0.14
>Date: Fri, 23 Mar 2007 11:13:05 -0700
>To: Paul Rissman <rissman at stanford.edu>
>From: Marian Naaf <mnaaf at stanford.edu>
>Subject: Re: Maintenance Supervisor Position
>Cc: mtang at snf.stanford.edu
>
>Hi Paul and Mary,
>As a follow up to the voice message I left Mary, I tried to send an 
>email to the SNF email address previously set up for applicants from 
>HotJobs to send their resumes to.  I received an auto response that 
>the email address was not valid.  Please let me know what email 
>address should be listed for the Maintenance Manager job posting in 
>HotJobs.  Please be advised, the job will not be posted on the 
>HotJobs web site until I hear back from one of you.  Thank you for 
>your attention to this matter.
>
>Marian
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>At 09:38 PM 3/21/2007, Paul Rissman wrote:
>>thanks
>>
>>At 09:20 AM 3/21/2007, you wrote:
>>>Paul,
>>>The job is currently posted on Stanford's employment web 
>>>site.  However, the posting on HotJobs has expired.  I will get it 
>>>re-posted on HotJobs before the end of this week.  The title will 
>>>be changed to Equipment Maintenance Manager.
>>>
>>>Marian
>>>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>



From mnaaf at stanford.edu  Fri Mar 23 11:27:52 2007
From: mnaaf at stanford.edu (Marian Naaf)
Date: Fri, 23 Mar 2007 11:27:52 -0700
Subject: testing
Message-ID: <6.2.0.14.2.20070323112729.01df8890@mnaaf.pobox.stanford.edu>



Marian Naaf, PHR
Human Resources Manager
School of Engineering
650-723-8145 




From caesar_larsen at yahoo.com  Tue Mar 27 07:25:34 2007
From: caesar_larsen at yahoo.com (caesar_larsen at yahoo.com)
Date: 27 Mar 2007 14:25:34 -0000
Subject: HotJobs submission for 23475, Equipment Engineering Maintenance Manager
Message-ID: <20070327142534.7419.qmail@util01.hj.scd.yahoo.com>

Caesar Larsen applied to the following job:  Job ID: 23475, Equipment Engineering Maintenance Manager on HotJobs.com.

****Cover Letter****


Name:		Caesar Larsen
Address:	2609 Via Espada
	 	
	 	Pleasanton, CA 94566
Job Title: 	Manager
Will Relocate?	N 
Experience Level:15
Work Auth:	United States
Primary Phone:	925 600 1999
Secondary Phone:
Email: 		caesar_larsen at yahoo.com 
Minimum Annual Salary Requirement: Unspecified 

******RESUME******

 
div.hj_sdc{ color: #000000; }
div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;}
/* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */
/* Forcing padding into the   tag prevents the collapse. */
div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc .Normal{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Normal--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Footer{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Footer--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
 
 





  Caesar S. Larsen  
  2609 Via Espada  
  Pleasanton, California 94566  
  (925) 600-1999  
 caesa  r_larsen at yahoo.com 
  Professional Mechanical Engineer with over 15 years 
of experience in manufacturing engineering, design engineering, and 
project management. Successful at creating and implementing solutions 
to complex design challenges. Experienced at leading new product introductions 
into manufacturing. Extensive experience in machine shop practices and 
operations.  
  Work Experience  
  April 2003 &ndash; April 2005&nbsp; 
Calmax Technology, Inc., Santa Clara, California  
  Manager, Customer Support Group  
 
     Managed a group of industrial, manufacturing, and mechanical engineers, 
  and designers and drafters   
     Provided engineering support to customers of bio-medical and semi-conductor 
  products   
     Rede  signed existing components and assemblies for better 
  functionality, ease of fabrication, and the reduction of production 
  costs   
     Evaluated failure modes of mechanisms and provided engineering solutions 
  to improve reliability   
 
  October 1996 &ndash; April 2003&nbsp; 
Therma-Wave, Inc., Fremont, California  
  Manager, Sustaining Engineering 
Group  
 
     Managed a team of manufacturing mechanical engineers in the support 
  of new product introduction and the design for manufacturabiltiy   
 
  Senior Staff, Custom Engineered 
Specials (CES) Group  
 
     Performed design analysis for cost reduction and component efficiency   
     Established outsourcing programs that allowed for changes in company 
  production due to fluctuations in product demand   
     Provided quick mechanical design solutions for newly introduced e  lectro-mechanical assemblies and components   
     Managed the CES Group responsible for the design and implementation 
  of specific customer-defined requests   
 
  May 1995 &ndash; October 1996&nbsp; 
Applied Materials, Inc., Santa Clara, California  
  CES Manager, Centura Etch Common 
Engineering  
 
     Evaluated CES proposal requests for gas delivery control panels   
     Developed concepts for designs to be used with CES design requirements, 
  and provided preliminary CES projects Bill of Materials, lead times, 
  and estimated material costs   
 
  CES Supervisor, Centura Etch 
Common Engineering  
 
     Determined the feasibility of CES proposal requests 
  for gas delivery control panels   
     Ensured that CES designs were completed within the 
  specified time frames   
     Ensured that CES packages were released in accordance 
  with   the Master Production Schedule   
     Conceived and planned new concepts and approaches 
  for new and improved products   
 
 &nbsp;  
  Education  
  Bachelor of Science in Mechanical 
Engineering, California State University, San Diego  
  Graduate-level courses in:  
 
     Bio-Mechanical Engi  neering   
     Industrial Ergonomics   
 
  Computer Skills&nbsp;   
  Microsoft   
Corporation Products:  
 
     Microsoft   ?    Excel   
     Microsoft   ?    Outlook   
     Microsoft   ?    PowerPoint   
     Microsoft   ?    Project   
     Microsoft   ?    Word   
 
  Other Products:  
 
     AGILE   TM    Engineering Design System   
     AutoCAD   ?  
    
     ManMan   TM  
    
 





    



  Caesar S. Larsen&nbsp;Page 2  


 


*** If your email client does not support HTML, this resume may not be displayed correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/jobs/attachments/20070327/563af0cf/attachment.html>

From rastegarf at cox.net  Tue Mar 27 17:41:52 2007
From: rastegarf at cox.net (rastegarf at cox.net)
Date: 28 Mar 2007 00:41:52 -0000
Subject: HotJobs submission for 23475, Equipment Engineering Maintenance Manager
Message-ID: <20070328004152.16224.qmail@util01.hj.scd.yahoo.com>

Freidoon Rastegar applied to the following job:  Job ID: 23475, Equipment Engineering Maintenance Manager on HotJobs.com.

****Cover Letter****
Dear Madam / sir

I believe I have the background, which you are looking for in  mechanica engineering. I have over 15 years of experience in Thin Film coating technology, building vacuum deposition equipments and related process. 

Presently I am completing design, build and commissioning of largest sputtering chamber in aircraft canopy industry. Chamber is capable of developing and producing ITO, gold, SiO2 and other multi layer reflective thin film coatings. The equipment consisted of several magnetrons; multiple mass flow metering system, 5 axes of motion, preheating and glow discharge cleaning (which I designed and built). 

In addition, developing an automated system for delivery of polyurethane base and top coats. Presently I lead division???s continuous improvement efforts for sputter coaters and vacuum chambers (total of nine). 
 
With combination of coating experience and successful track record of launching coating equipment from design to production, I believe I can be an asset to your company .
 
Regards	


Freidoon Rastegar

310-265-8896
310-753- 6769 Cell

Name:		Freidoon Rastegar
Address:	30744 Rue De La Pierre
	 	
	 	Rancho Palos Verdes, CA 90275
Job Title: 	IPD team Leader
Will Relocate?	Y 
Experience Level:15
Work Auth:	United States
Primary Phone:	310 265 8896
Secondary Phone:310 753 6769
Email: 		rastegarf at cox.net 
Minimum Annual Salary Requirement: $120,000

******RESUME******

 
div.hj_sdc{ color: #000000; }
div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;}
/* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */
/* Forcing padding into the   tag prevents the collapse. */
div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc .Normal{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Normal--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .body--0020text{
div.hj_sdc  margin-top: 5pt;
 margin-bottom: 5pt;
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .body--0020text----char{
}
div.hj_sdc .body--0020text----char--Char{
}
div.hj_sdc .Salutation{
div.hj_sdc  margin-top: 5pt;
 margin-bottom: 5pt;
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .salutation----char{
}
div.hj_sdc .salutation----char--Char{
}
div.hj_sdc .heading--00204----char{
 font-size: 12pt;
 font-weight: normal;
 color: #000000;
}
div.hj_sdc .heading--00204----char--Char{
 font-size: 12pt;
 font-weight: normal;
 color: #000000;
}
div.hj_sdc .Heading-00204{
div.hj_sdc  margin-top: 5pt;
 margin-bottom: 5pt;
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .hyperlink----char{
}
div.hj_sdc .hyperlink----char--Char{
}
div.hj_sdc .body--0020text--00202{
div.hj_sdc  margin-top: 5pt;
 margin-bottom: 5pt;
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .body--0020text--00202----char{
}
div.hj_sdc .body--0020text--00202----char--Char{
}
div.hj_sdc .Heading-00203{
div.hj_sdc  margin-top: 5pt;
 margin-bottom: 5pt;
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 13pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00203--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 13pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .heading--00203----char{
 font-size: 12pt;
 font-weight: normal;
 color: #000000;
}
div.hj_sdc .heading--00203----char--Char{
 font-size: 12pt;
 font-weight: normal;
 color: #000000;
}
div.hj_sdc .normal----char{
}
div.hj_sdc .normal----char--Char{
}
div.hj_sdc .Heading-00202{
div.hj_sdc  margin-top: 5pt;
 margin-bottom: 5pt;
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 18pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00202--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 18pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
 
 





     
       
    
  
   

   Freidoon Rastegar   
   30744 Rue 
De La Pierre&nbsp;    
   Rancho 
Palos Verdes, CA 90275   
   US Citizen &nbsp;   
    rastegarf at cox.net    
   310 753-6769    
   Engineering Manager   with extensive experience in manufacturing, process and product development.&nbsp; 
Proven success launching new products and engineering programs in different 
industries.&nbsp; Decisive, energetic, quick study with strong technical acumen.&nbsp; 
&nbsp;   
   PROFESSIONAL EXPERIENCE   
 MiaSole,&nbsp;   Santa Clara, Ca   
   2006     Director of Equipment   
   Lead the design and build of an inline / continuous coater including 
web handling equipment.&nbsp; Directed a group of 20 professionals and 
recruited and built an equipment engineering department.   
 
       Design group include 5 USA based design / analysts engineers and 10 
  in china      
 
 
       Imple  mented an Engineering MRP system tide to Solid works design platform     
 
 
       Established a control groups including programmers and designers     
 
 
       Completed first machine in 14 weeks      
 
   GKN AEROSPACE,   Garden Grove, CA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;   &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;   
    2002- Present&nbsp;&nbsp;&nbsp;   IPD Team Leader   
   Leading design, development, scale-up, and automation and production 
implementation of optical coatings for aircraft canopy and large area 
glass.    
 
      Developed vacuum chamber up grades and automation str  ategies for the north American division    
      Leading a team of design, process and scientific engineers.    
      Designed and built large (12  &rsquo;   plus diameter chamber-$1M plus budget) vacuum coating system, which 
  includes large part motion, multi magnetron cathode design  s, power supplies, glow discharge, pumping, and control system (13 
  axis of motion).    
      Responsible for coating processes development and improving production 
  yields on present magnetrons puttering and evaporation techniques of 
  ITO, Gold and SiO   2    coatings.&nbsp;       
      R  educed scrap rates of F-18 coating line by 25% and increased glass 
  coating yields 50% by retrofitting older chamber and improving present 
  deposition process     
      Perform DOE  &rsquo;  s, PFMEA  &rsquo;  s, Kiazen and implement SPC on present coating production processes.     
      PLC and   HMI programming proficient     
      Proficient user of Unigraphics solid modeling and   Macleod       optical thin film software.    
 
   HONEYWELL/GARRETT,   Torrance, CA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;    
   1999 &ndash; 2002&nbsp;&nbsp;&nbsp;    Program Manager  
   Led truck and bus emission-related programs with staff of 15 and capital 
and engineering budget of $9M.&nbsp; Project consisted of a vacuum brazed 
EGR heat exchangers (250,000/year) to meet 2002 EPA NOx standards.&nbsp; Interfaced 
with Executive Staff, and served as Steering Committee Team Member for 
DOE/DOD 21 st  Century Truck Initiative.   
 
      Oversaw engineering resources,     
      Project management oversight    
      Initiated design changes and solutions    
      Product reviews, set priorities and deadlines,    
      Asses program risks and mitigation plan.    
      Customer interaction and contract negotiation    
      Manufacturi  ng site selection, capital, tooling and production start up.     
 
   Team members formed from product and application engineering, FEA 
analysts, quality, sales, manufacturing, production plant, purchasing 
and suppliers.    
   ENGELHARD / Surface Technology,   E. Windsor, CT&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;    
   1997 &ndash; 1999&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
Product/Unit Business Manager    
   Acted as change agent to broaden market focus, reorganized work and 
sales forces, oversaw Landing Gear and Jet Engine Shroud business coating 
unit with an income of $3M.&nbsp; Served on globalization team and interfaced 
with customers.&nbsp; Oversaw six direct reports (including 2 sales engineers).   
 
      Grew Auto and Diesel Unit income from $200K to $1.2M in one year by 
  entering recondition and retrofit market.&nbsp;   Introduced automation in the plant and reduced   labor force in plasma spray of pistons.    
      Reorganized GE gas turbine Shroud and Boeing Landing Gear SBUs, streamlining 
  processes, improving quality and implementing Six Sigma for Coatings.    
      Presented technology data to Boeing and convinced them of Engelhard  &rsquo;  s   superior engineering and coatings HVOF &amp; Plasma spray capabilities, 
  resulting in Engelhard being put on Boeing  &rsquo;  s qualified list for potential earnings of $12M in business.    
 
   CUMMINS ENGINE COMPANY,   Charleston, SC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;    
   1989 &ndash; 1997&nbsp;&nbsp;&nbsp; &nbsp;Technical Advisor 
&amp; Program Manager   
   Served as Program Manager and Technical Advisor at Piston Ring Division, 
which was sold.&nbsp; Joined Cummins Advanced Power Cylinder group, and managed 
programs from research to production introduction phases.   
 
      Developed vacuum deposited coatings (Hollow Cathodes &amp; Cathodic 
  Arc) for rings and fuel injectors.    
      Interfaced with Directors and Vice President to obtain $900K for capital 
  equipment, and led engineering team to introduce and implement new coating 
  process a  nd specification, providing $1M/year in cost savings and replacing 
  hazardous chrome processes.    
      Formed team with Northwestern University and GE Aircraft engineers, 
  obtained external funding to continue research and developed program 
  that was accepted by ARP  A and funded for four years, creating a new standard in the industry.    
      Secured government funding for research projects totaling approximately 
  $1.5M (TBC  &rsquo;  s, Carbide Coatings) and sold the projects to management, obtaining 
  approval for implementation.    
      Obtain  ed two patents on new manufacturing processes that were later sold 
  as part of a $20M business.    
 
   BRIGGS &amp; STRATTON,   Milwaukee, WI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;   
       
   1985 &ndash; 1989&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Research Engineer   
   Developed vacuum coating materials, new cleaning process, high vacuum 
equipment, and high-speed vacuum coating process (PVD- Sputter coating, 
Hot Hollow Cathode &amp; Cathodic Arc) and finishing process.   
 
      Developed and implemented cost reduction product and process, developing 
  diamond cutting to produce super-finished bore.&nbsp;   Diamond cut  ter tool was implemented into production process, providing a cost 
  savings of $4M/year.    
 
   EDUCATION   
   Master&rsquo;s Mechanical Engineering   Georgia Institute of Technology   
   Bachelor of Science&nbsp;   Nuclear Engineering, University of Tennessee, Received NIOC Grant.   
   Doctorate Program,   with emphasis in Materials, Lubrication and Tribology (coatings), 
Georgia Institute of Technology, NLGI Author of the Year   
  AFFILIATIONS &amp; PROFESSIONAL DEVELOPMENT  
 AlliedSignal Green Belt 
&amp; Lean Manufacturing, Global Production System, Leadership Training, 
 Unigraphics, DOE, and 
SPC  
   Published 15 
articles in SAE, ASME, Thin Films, Thermal Spray and other engineering 
journals   





    




 


*** If your email client does not support HTML, this resume may not be displayed correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/jobs/attachments/20070328/86a4b559/attachment.html>

From jieben31 at yahoo.com  Tue Mar 27 19:49:22 2007
From: jieben31 at yahoo.com (jieben31 at yahoo.com)
Date: 28 Mar 2007 02:49:22 -0000
Subject: HotJobs submission for 23475, Equipment Engineering Maintenance Manager
Message-ID: <20070328024922.5357.qmail@util01.hj.scd.yahoo.com>

Benjamin Mendoza applied to the following job:  Job ID: 23475, Equipment Engineering Maintenance Manager on HotJobs.com.

****Cover Letter****


Name:		Benjamin Mendoza
Address:	172 Sala Cabuyao, Laguna
	 	
	 	Cabuyao,  3015
Job Title: 	Facilities Engineer/Safety Officer
Will Relocate?	Y 
Experience Level:10
Work Auth:	PHL, PHL, PHL
Primary Phone:	011639275264349
Secondary Phone:
Email: 		jieben31 at yahoo.com 
Minimum Annual Salary Requirement: Unspecified 

******RESUME******

 
div.hj_sdc{ color: #000000; }
div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;}
/* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */
/* Forcing padding into the   tag prevents the collapse. */
div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc .Normal{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Normal--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Footer{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 12pt;
 text-decoration: none;
}
div.hj_sdc .Page-0020Number{
}
div.hj_sdc .Body-0020Text-0020Indent{
 margin-left: 36pt;
 text-indent: 0pt;
 font-family: 'Verdana', 'Arial';
 font-size: 8pt;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Body-0020Text-0020Indent--Char{
 font-family: 'Verdana', 'Arial';
 font-size: 8pt;
 text-decoration: none;
 color: #000000;
}
 
 





  BENJAMIN T. MENDOZA 
JR.  &nbsp; 
&nbsp; 
Position Applied for:   PLANT MANAGER  &nbsp; 
Profession: REGISTERED MECHANICAL ENGINEER &nbsp; 
Professional License No.: 046894&nbsp; 
LLDA Accredited Pollution Control Officer&nbsp; 
CAO No. 2005-00103&nbsp; 
 &nbsp; 
  
   Address: 172 Sala, Cabuyao, Laguna, 
Philippines&nbsp; 
&nbsp; 
Tel. No.: (063) 917-8142614/09159499586&nbsp; 
&nbsp; 
E-mail: Benjamin.T.Mendoza.Jr at grace.com&nbsp; 
jieben31 at yahoomail.com&nbsp; 
&nbsp; 
  A.  WORK EXPERIENCES:   &nbsp; 
  
 
    W.R. GRACE PHILIPPINES 
  INC.  
 
  POSITION:&nbsp;  PLANT ENGINEER   
  BUSINESS: CHEMICAL MANUFACTURING&nbsp; 
Silangang Canlubang Industrial Park &nbsp; 
Canlubang, Laguna&nbsp; 
(September 12, 2005 - PRESENT)  
 
 
    Equipment &amp; facilities maintenance  
    Implemented predictive maintenance 
  system.  
    Initiated Contractor safety programs  
    Managed contractors in projects relating 
  to Environmental Health &amp; Safety (EHS)  
    Collaborate with the   corporate counterparts in dealing 
  with the plans, programs unrolled by the top management.  
    Manages a team of maintenance &amp; 
  facilities personnel in supporting the operations through machine &amp; 
  equipment efficiency.  
    Modified &amp; improved old modeled 
  equipments   to fit operations.  
 
 
 
    PHOTOCIRCUITS PHILIPPINES INC  .   
 
  POSITION:  FACILITIES &amp; EQUIPMENT ENGINEER/SAFETY 
OFFICER /PCO   
  BUSINESS: PRINTED CIRCUIT BOARD MANUFACTURER&nbsp; 
First Philippine Industrial Park &nbsp; 
Sto. Tomas, Batangas&nbsp; 
(December 2000- September 11, 2005)  
  1. 
Coordinate with power and water utilities regarding concerns about power 
qualities; power fluctuation, metering and billings.&nbsp; 
&nbsp; 
2. Planning and implementation of IT expansion projects; power supply 
and communication lines provisions to workstations, civil works, room 
ventilation, lightings and air-conditioning. &nbsp; 
&nbsp; 
3. Prepare multi-optional cost estimates to company projects.&nbsp; 
&nbsp; 
4. Maintain existing production and facilities equipments; Air handling 
units, chillers , exhaust fans, factory electrical and lightings.&nbsp; 
&nbsp; 
5. Coordinate with factory general contractor regarding punch listings 
and areas for repair or modifications.&nbsp; 
&nbsp; 
6. Safety Officer; prepare and submit Department of Labor and Employment's 
periodic safety requirements.&nbsp; 
&nbsp; 
7. Attend seminars and meetings concerning safety, facility and equipment 
issues.&nbsp; 
&nbsp; 
8. Prepare Preventive Maintenance program for existing plant equipments 
and Facilities.&nbsp; 
&nbsp; 
9. Prepare Facilities and Equipment Maintenance documentation procedures.&nbsp; 
&nbsp; 
10. Equipment troubleshooting and repair.&nbsp; 
&nbsp; 
  
 
    R  AM FOOD PRODUCTS 
  INC.     
 
  POSITION:  MAINTENANCE &amp; FABRICATION SUPERVISOR   
  BUSINESS: FOOD CANNING &amp; MANUFACTURING&nbsp; 
Km 46, Pulo, Cabuyao, Laguna &nbsp; 
(1998-2000)&nbsp; 
&nbsp; 
1. Supervise Engineering, Fabrication, and Maintenance Personnel (Electrical/Mechanical)&nbsp; 
2. Prepare Preventive Maintenance Program for Plant Machinery and Electrical 
Machinery (Boiler, Seamers, Air Compressors, Reefer Van, Generators, 
Wastewater Facilities, Pneumatic Equipment, etc.)&nbsp; 
3. Analyze plant-related problems that will eliminate or minimize downtimes 
due to machine or equipment breakdowns, to further increase production 
efficiency, productivity and safety&nbsp; 
4. Ensure the Top Management that the machinery and equipment are 100% 
efficient at the time of utilization and provide an immediate corrective 
action in cases of inevitable machine breakdowns&nbsp; 
5. Recommend machine parts and tools for procurement to meet the desired 
specifications&nbsp; 
6. Designed and develop auxiliary tools and equipment from available 
plant materials.&nbsp; 
7. Introduce ISO 9000 System as a backbone of the Engineering Department 
in preparation for global competitiveness.&nbsp; 
&nbsp; 
  
 
    EASTERN STEEL PTE. 
  LTD.  
 
  POSITION:  MECHANICAL ENGINEER   
  BUSINESS: REBAR STEEL FORMING&nbsp; 
No. 9, Pier Road, Jurong, Singapore (Engineering Department)&nbsp; 
(August 1999- October 1999)&nbsp; 
&nbsp; 
1. Hands-on Training on Programmable Logic Controller and Hydraulic 
Machinery (Steel Forming and Steel Cutting Machines)&nbsp; 
2. Modified Machine parts to minimize breakdown&nbsp; 
3. Drafted ISO 9000 Manual for the Maintenance Department&nbsp; 
4. Supervised machine relocation, installation and commissioning&nbsp; 
5. Introduce Preventive Maintenance (PM) and Corrective Maintenance 
(CM) Programs&nbsp; 
  
 
    ROBERTS AUTOMOTIVE INDUSTRIAL   &nbsp; 
    PARTS MANUFACTURING 
  CORP.     
 
  BUSINESS: RADIATOR &amp; LEAFSPRING 
MANUFACTURING  
  POSITION:  PRODUCTION ENGINEER &nbsp; 
Bo. Pittland, Cabuyao, Laguna&nbsp; 
(1997 1998)&nbsp; 
&nbsp; 
1. Prepared Preventive Maintenance programs for tooling, jigs and fixtures.&nbsp; 
2. Recommend modifications on tooling to meet the desired specifications 
of products.&nbsp; 
3. Handled special project section.&nbsp; 
4. Prepared Departments documentation in preparation for ISO Audit.&nbsp; 
5. Recommend plant improvements.&nbsp; 
6. Analyzed quality related problems of stamp parts and recommend countermeasures.&nbsp; 
  
 
    VITARICH CORPORATION     
 
  POSITION:  HATCHERY TECHNICIAN   
  BUSINESS: POULTRY HATCHING&nbsp; 
Marilao, Bulacan (Hatchery Department)&nbsp; 
(1995- 1997)&nbsp; 
&nbsp; 
1.Trouble-shooting of plant machinery (Cooling Systems, Incubators, 
Water Chillers and Electrical equipment)&nbsp; 
2. Operate and maintain 312 KVA Cummins Genset, Chick master incubators, 
and cold water generators.&nbsp; 
3. Supervise hatchery staff.&nbsp; 
4. Monitor incoming and outgoing materials and finished products.&nbsp; 
  
  B.  TRAININGS:   &nbsp; 
&nbsp; 
1.  MACHINE OPERATION &amp; MAINTENANCE&nbsp; 
OUTER LAYER IMAGING &nbsp; 
Photocircuits Corporation&nbsp; 
Glen Cove, New York USA&nbsp; 
2003-2004&nbsp; 
&nbsp; 
2.  TRAFFIC MANAGEMENT &nbsp; 
TMG&nbsp; 
FPIP Sto. Tomas, Batangas&nbsp; 
2004&nbsp; 
&nbsp; 
3.  BASIC OCCUPATIONAL SAFETY &amp; 
HEALTH &nbsp; 
Department of Labor and Employment&nbsp; 
Batangas City&nbsp; 
2002&nbsp; 
&nbsp; 
4.  BASIC LIFE SUPPORT &nbsp; 
FPIP Sto. Tomas, Batangas&nbsp; 
October 3, 4, 2001&nbsp; 
&nbsp; 
5.  FIRE FIGHTING &amp; RESCUE EXTRICATION &nbsp; 
FPIP Sto. Tomas, Batangas&nbsp; 
September 7 &amp; 14, 2001.&nbsp; 
&nbsp; 
6.  BASIC PROGRAMMABLE CONTROLLER OPERATION &nbsp; 
Eastern Steel Services Pte. Ltd.&nbsp; 
No. 9, Pier Road, Jurong, Singapore&nbsp; 
&nbsp; 
7.  CERTIFICATE OF ATTENDANCE &nbsp; 
MS WORD, EXCEL, POWER POINT&nbsp; 
AMA COMPUTER LEARNING CENTER&nbsp; 
Marikina-Cainta Branch&nbsp; 
January 1997&nbsp; 
&nbsp; 
8.  REFRIGERATION AND AIRCONDITIONING 
MECHANIC &nbsp; 
Technological Skills and Development Authority (TESDA)&nbsp; 
Guiguinto, Bulacan&nbsp; 
September, 1995&nbsp; 
&nbsp; 
9.  UHT SEMINAR &nbsp; 
Sponsored by TETRA PAK&nbsp; 
AIM Conference Center&nbsp; 
Makati City&nbsp; 
September 28 - 29, 2000&nbsp; 
&nbsp; 
  C.  EXAMINATION PASSED:   &nbsp; 
&nbsp; 
1.  MECHANICAL ENGINEERING LICENSURE 
EXAM &nbsp; 
University of the East, Manila&nbsp; 
October, 1994&nbsp; 
Rating: 78.20%&nbsp; 
&nbsp; 
2.  CIVIL SERVICE CAREER PROFESSIONAL 
EXAM &nbsp; 
San Fernando, Pampanga&nbsp; 
October 1993&nbsp; 
Rating: 84.16%  
  &nbsp; 
&nbsp; 
  D  .   EDUCATION  :  &nbsp; 
&nbsp; 
 &nbsp; 
1.  LAGUNA COLLEGE OF BUSINESS &amp; 
ARTS &nbsp; 
&nbsp;&nbsp;&nbsp; Calamba, Laguna&nbsp; 
&nbsp;&nbsp;&nbsp;&nbsp; 2004 -1 st  Semester  
  &nbsp;&nbsp;&nbsp;&nbsp; Master of 
Business Administration&nbsp; 
  
   2.  BULACAN STATE UNIVESITY &nbsp; 
&nbsp; Malolos, Bulacan&nbsp; 
 1987 1992&nbsp; 
&nbsp; 
Course:  Bachelor 
of Science in MECHANICAL ENGINEERING &nbsp; 
&nbsp; 
3.  ASSUMPTA ACADEMY &nbsp; 
Bulacan, Bulacan&nbsp; 
Secondary  
  1983-1987&nbsp; 
&nbsp; 
4.  M.H.P. MEMORIAL SCHOOL &nbsp; 
Bulacan, Bulacan&nbsp; 
1977 1983&nbsp; 
Elementary&nbsp; 
&nbsp; 
  E.     PERSONAL  :  &nbsp; 
&nbsp; 
Nickname: BENJIE&nbsp; 
Date of Birth: January 20, 1971&nbsp; 
Citizenship: Filipino&nbsp; 
Height: 188 cm.&nbsp; 
Weight: 77 Kg&nbsp; 
Civil Status: Married&nbsp; 
Religion: Roman Catholic&nbsp; 
Passport No.: EE485841&nbsp; 
&nbsp; 
CHARACTER REFERENCES:&nbsp; 
&nbsp; 
Available upon request.  





    





 


*** If your email client does not support HTML, this resume may not be displayed correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/jobs/attachments/20070328/aaf999e1/attachment.html>

From mlabunsky at comcast.net  Thu Mar 29 10:39:52 2007
From: mlabunsky at comcast.net (mlabunsky at comcast.net)
Date: 29 Mar 2007 17:39:52 -0000
Subject: HotJobs submission for 23475, Equipment Engineering Maintenance Manager
Message-ID: <20070329173952.11088.qmail@util01.hj.scd.yahoo.com>

Michael Labunsky applied to the following job:  Job ID: 23475, Equipment Engineering Maintenance Manager on HotJobs.com.

****Cover Letter****


Name:		Michael Labunsky
Address:	116 Mesa Verde Way
	 	
	 	San Carlos, CA 94070
Job Title: 	Production Manager
Will Relocate?	N 
Experience Level:15
Work Auth:	United States
Primary Phone:	650.303-6663
Secondary Phone:650.596-8393
Email: 		mlabunsky at comcast.net 
Minimum Annual Salary Requirement: Unspecified 

******RESUME******

 
div.hj_sdc{ color: #000000; }
div.hj_sdc p { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h1 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h2 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h3 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h4 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h5 { margin-top: 0pt; margin-bottom: 0pt;}
div.hj_sdc h6 { margin-top: 0pt; margin-bottom: 0pt;}
/* In certain situations, Netscape collapses vertical margins which results in unreadable tables. */
/* Forcing padding into the   tag prevents the collapse. */
div.hj_sdc td p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc th p { padding-top: 1pt; padding-bottom: 1pt;}
div.hj_sdc .Normal{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 10pt;
 text-decoration: none;
}
div.hj_sdc .Normal--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 10pt;
 text-decoration: none;
}
div.hj_sdc .Heading-00201{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 14pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00201--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 14pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00202{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 10pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00202--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 10pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00203{
 text-indent: 0pt;
 font-family: 'Times New Roman', 'Arial';
 font-size: 10pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
div.hj_sdc .Heading-00203--Char{
 font-family: 'Times New Roman', 'Arial';
 font-size: 10pt;
 font-weight: bold;
 text-decoration: none;
 color: #000000;
}
 
 





    
  
     
       
    
  
    
  
     
       
    
  
    
  
    
  
   

  Michael Labunsky  &nbsp;&nbsp;&nbsp;  116 Mesa 
Verde Way  
  San Carlos, CA&nbsp; 
94070  
  Tel.: (650) 596- 8393  
  Cell: (650) 303- 6663  
  E-mail: 
mlabunsky at comcast.net  
 Objective 
 Challenging Engineering 
position utilizing my background and experience in High-Tech Industry. 
  Experience  
 2004 to Present, Aurora Manufacturing Inc, Production 
Manager 
 ? Held 
full responsibility for production, operations and maintenance of capital 
equipment and facilities.  
 ? Implemented 
advanced production methods, material tracking and plans leading to 
12% cost savings. 
 ? Responsible 
for product&rsquo;s yield improvement and cycle time reduction in production 
lines. 
 ? Hired 
and trained production and maintenance operators/ technicians, evaluated 
and purchased capital equipment. 
  1999 to 2004, Engineering Consultant, Advanced 
Product Evaluation and Implementation  
 ? Evaluated, 
Proposed and Implemented pilot production for several high-tech start-ups. 
 ? Build 
and managed world &ndash;class engineering organization. 
 ? Initiated 
early- stage business contacts and JDP in Asia, Europe and USA.  
 . Improved 
device yield through development of proprietary technologies. 
 ? Initiated 
Joint Development Program(s) with leaders in the field: Intel, AMAT, 
Seagate and Cabot. 
 ? Managed 
R &amp; D budget, evaluated and acquired capital and analytical equipment. 
 &nbsp;&nbsp;  
  1996 to 1999, LAM Research Corporation, 300mm 
Project Development Manager  
 ? Led 
team of engineers and technicians in design, prototype development and 
evaluation of  
 &nbsp;&nbsp; 
300 mm CMP (Chemical Mechanical Polishing) platform. 
 ? Demonstrated 
process capabilities to customers, instrumental in winning several major 
accounts 
 ? Proposed 
novel Copper CMP process with built-in end point capabilities and rate 
control. 
 ? Developed 
technology and IP for in-situ thin-film measurements and new process 
control methods. 
 ? Developed 
and implemented &quot;slurry dilution&quot; process for polishing of 
low-density oxides. 
 ? Managed 
project budgets and schedules. 
  1994-1996, National Semiconductor Corporation, 
Equipment Engineering Manager  
 Managed 
operation, maintenance and improvements of CMP, Cleaning,CVD and PVD 
equipment: 
 ? Evaluated, 
qualified, selected, and set up variety of specialized equipment (IPEC 
472 CMP machines, SpeedFam&rsquo;s Auriga, DSS 200 scrubbers, AMAT 5000 CVD, 
Varian M2000 etc.) 
 ? Developed 
novel method of FMEA (failure mode and effect analyses), used resulting 
data  
 &nbsp;&nbsp; 
as part of negotiated service contracts. 
 ? Introduced 
on-line accessible preventive maintenance and operation specifications.&nbsp;  
 ? Identified 
training objectives and managed cross-training for equipment engineers, 
maintenance technicians and operators. 
 ? Assessed 
emerging semiconductor processes and advanced production tools for NSC. 
 ? Provided 
forecasts, operating and capital budgets 
  1991-1995, Solby Grand, Inc., Manager, Technology 
Evaluation and Licensing  
 ?Established 
and managed acquisition and licensing group: 
 ? Selected, 
licensed, and implemented magnetic bearing spindle drive technology 
at major German textile manufacturer 
 ? Evaluated 
E-Beam and X-ray lithography capabilities at Russian Academy of Science 
 ? Developed 
and managed pilot production of zirconium-coated surgical (ophthalmologic) 
instruments at Synthetic Diamonds Research Center, Ukrainian Academy 
of Science 
 Page 
1 
  Next page, please  &nbsp;&nbsp;  
  1983 - 1991, Intel Corporation, Sr. Process Engineer   
 Managed evaluation, production line implementation, 
and continuous improvements of CVD 
 and PVD systems, device yields and machine throughput 
enhancements: 
 ? Developed 
and implemented high-yield Ti / W barrier layer in x86 family of microprocessors. 
 ? Directed 
evaluation and implementation of advanced Fab design and construction 
methods. 
 ? Conceptualized 
and executed intensive modifications of thin-film and metrology systems. 
 ?&nbsp; 
Selected, evaluated and set-up specialized sputter and chemical vapor 
deposition systems (Anelva 1015I Sputter Cluster and Applied Materials 
AMAT 5000 CVD) in Santa Clara R&amp;D center. 
 ? Established 
and implemented maintenance and operational procedures. 
 ? Trained 
maintenance technicians and Fab operators. 
 ? Tracked 
project progress, budgets and schedules. 
 Education 
 University of Moscow, MSME, 1978. 
 Additional course work: Vacuum, Etch, CVD, PVD and 
CMP technology; Art of Management; Business Fundamentals For Engineering 
Professionals 
 Awards 
 Gordon Moore Technical Excellence Award 
  Patents  
  US6132289 for film thickness measurement; US6086460 for pad conditioning 
apparatus;  
  US6328637 for method and apparatus for conditioning a polishing pad 
used in CMP;   
  99914034.6-2302 for apparatus and method for in- situ  film thickness monitoring;  
  US 20020137431 A1 for Methods and apparatus for polishing and planarization.  
 Associations 
 Current Member, American Vacuum Society 
  References  
 Professional and personal references available upon 
request. 





    




 


*** If your email client does not support HTML, this resume may not be displayed correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/jobs/attachments/20070329/1d5cdb3d/attachment.html>

From hjadams7 at pacbell.net  Fri Mar 30 01:53:34 2007
From: hjadams7 at pacbell.net (hjadams7 at pacbell.net)
Date: 30 Mar 2007 08:53:34 -0000
Subject: HotJobs submission for 23475, Equipment Engineering Maintenance Manager
Message-ID: <20070330085334.17748.qmail@util01.hj.scd.yahoo.com>

HERMAN Adams applied to the following job:  Job ID: 23475, Equipment Engineering Maintenance Manager on HotJobs.com.

****Cover Letter****
Herman J. Adams
3263 Ridge Crest Court
Hayward, CA 94541
(510) 387-9701
hjadams7 at pacbell.net




To: HR Manager

I am seeking a career in engineering which involves the need for an individual with my skills, knowledge and abilities.  As my resume highlights, I have a B.S. in Mechanical Engineering.  I also have diverse skills in project management, design, and consulting.  I have contributed in the workplace by proactively providing quality assurance resulting in customer satisfaction.

I can start work immediately, due to winter layoffs from Consolidated Engineering Labs.
I would appreciate the opportunity to discuss my credentials with you at a mutually convenient time.  Thank you in advance for your consideration.


Respectfully yours,

Herman J. Adams

Enclosure: Resume

Name:		HERMAN Adams
Address:	3263 RIDGE CREST COURT
	 	
	 	Hayward, CA 94541
Job Title: 	Building Industry Consultant / Design Engineer
Will Relocate?	Y 
Experience Level:5
Work Auth:	United States
Primary Phone:	510-387-9701
Secondary Phone:
Email: 		hjadams7 at pacbell.net 
Minimum Annual Salary Requirement: Unspecified 

******RESUME******

HERMAN ADAMS
3263 Ridge Crest Court - Hayward, CA 94541
Telephone:  (510) 387-9701 - E-mail: hjadams7 at pacbell.net

OBJECTIVE

To obtain a position in engineering to utilize my Mechanical Engineering,
Project Management, Design Engineering, and Consulting skills to enable the
company to develop and implement projects in a cost effective manner.

PROFESSIONAL SKILLS
Strategic / Long Range Planning		-Program Management
Performance Optimization		-Budgeting and Finance
Process Improvement			-Teaching / Training / Presenting 
Organizational Development		-Adapting to Rapid Change

*    Experience successfully working in a multi-discipline consulting and design
/ build environment with 
      defined budgets and schedules with high customer and manager
expectations.
*    Teams with client services representatives and sales in driving the
following channels of growth: new
      service agreements, field proposals, retrofit projects, maintenance
repair, and quality inspections to
      resolve potential issues.
*    Ensuring costs stay in line with the financial objective.  Develops
long-range schedules for executing
      the project/contracts, strategically forecasting all the financials for
the contracts, billing the contracts,
      and scheduling manpower.
*    Lead project engineer for several major corporate customers including
Kaiser Permanente, University
      of California Berkeley, Chiron, U.S. Post Office, PIXAR, SIEBEL, and
BAYER.

Telecommunication Consulting
        *   Performed work as a Building Industry Consultant, providing
information about the fiber application
            needed for present and anticipated growth.
        *   Developed 70% of the plans for growth for the city of Emeryville.
        *   Point of contact for development in cities of Albany, Berkeley,
Emeryville, Hayward, and Oakland. 
Facilities Design Engineering
*  Designed facilities for telecommunication projects, coordinating company
development plans with 
     various city government regulations and plans for population growth.
*  Consulted with the installation and design team to obtain ideas and create
new processes to better
     utilize the workforce.
Project Management 
*  Managed fiber-ring implementation in Berkeley, which included managing all
businesses and
     internal groups involved in the process.
        *   Coordinated the design and building facilities for student housing
at the University 
            of California.
        *   Combined multiple design implementation projects at the Berkeley
facilities in order to save on
            labor cost and expenses.  

INDUSTRY EXPERIENCE
Construction Inspector / Laboratory Technician
Consolidated Engineering Laboratories - San Ramon, CA		           
	           3/2004 - 11/2006
Inspector for various construction projects where I verify that construction
teams follow procedures of required building codes, and requirements of the
engineer.  Inspection activities include concrete, epoxy, anchor testing, and
mechanical inspections for construction sites, clean rooms, data centers, and at
both the Lawrence Livermore and Lawrence Berkeley National Laboratories.  Tested
anchoring systems for worldwide manufacturers using tension, shear, and seismic
testing for Powers Fasteners, Red Head, and HILTI.

(Resume Cont&#39;d)

HERMAN ADAMS
Telephone:  (510) 387-9701 - E-mail: hjadams7 at pacbell.net

SBC (Formerly Pacific Bell) - Hayward, CA                                       
                             3/1997 - 12/2002
Building Industry Consultant Engineer (BIC/Design)
Improved telecommunications designs based on statistically sound analysis
methods and analytical results. Developed systems by selecting optimal sources
for facilities by referencing databases, and drawings. Negotiated lead times,
part and tooling pricing; release drawings for obtaining parts, initiate
purchase requisitions for parts; monitor supplier progress ensuring adherence to
schedule and quality. Managed many post-release changes, coordinated
construction teams to complete designed project.  Collaborated with contractors,
owners, and city managers to design entrance facilities for telephone services. 
Provided project management, including structural design of residential and
business facilities for cabling of telephone equipment.  Designed maintenance
plans and upgrades for copper and fiber systems.

MATHESON FAST FREIGHT - Hayward, CA                                             
                      10/1997-Present
Load Quality Manager
Manages 5 workers, verifying freight loaded into trucks is secured for transit
with on-time delivery.
  
LOCKHEED MARTIN, Oak Ridge, TN                                                  
                   Summers 1994 - 1995
Quality Assurance Manager
Assisted the office of Quality Programs and Inspection group for the Research
Reactors Division. Managed quality control of receipt inspections where I
identified materials utilizing X-ray Fluoroscopy, and surveillance of mechanical
fabrication for materials to be used in the High Flux Isotope Reactor.
        ?   Detected a shipment of scratched pipes and reported the problem,
leading to a manufacturer
            investigation.  Pipes were found defective.  Early detection of the
defective product left the
            service life of expensive company pumps intact.
        ?   Previously held a Security Clearance for access to the Oak Ridge
National Laboratory.

TENNESSEE STATE UNIVERSITY, Nashville, TN				
Spring/Fall  1994-1995       
Resident Assistant
Worked as a mentor, counselor, bookkeeper, organized activities, and held a
leadership role 
for the men&#39;s dormitory.

B & B INTERIOR SPECIALITY CONTRACTORS INC., Memphis, TN	Summer 1993
Interior Design Assistant
Worked in structuring of walls and ceilings for construction and interior
redesign of buildings.
Obtained knowledge of project management from external sources.

EDUCATION & MEMBERSHIPS

Bachelor of Science degree in Mechanical Engineering received August 1996. 
Tennessee State University - Nashville, TN.  

Continuing professional/technical education includes seminars or courses in the
following: OC-12 / OC-48 Database Systems, Litespan, and Telecom Safety.

Memberships: National Society of Black Engineers and American Society of
Mechanical Engineers.

Sound working knowledge of the following software applications: Microsoft Word,
Excel, and AutoCAD.

Security Clearance presently inactive but can be obtained.

Excellent references will be provided upon request.

*** If your email client does not support HTML, this resume may not be displayed correctly.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/jobs/attachments/20070330/f131f57f/attachment.html>