From qwang at snf.stanford.edu Mon Apr 7 03:54:22 2003 From: qwang at snf.stanford.edu (qwang at snf.stanford.edu) Date: Apr 7, 2003 3:54:22 PM Subject: Problem karlsuss 2003-04-07 15:54:22: Noise Message-ID: There is strong noise when the microscope goes down. From vilanova at snf.stanford.edu Tue Apr 8 07:46:07 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Apr 8, 2003 7:46:07 AM Subject: Problem karlsuss 2003-04-07 15:54:22: Report Clear for karlsuss Message-ID: I checked the microscope for that noise and sounded normal I compared between both karlsuss and both sound the same. From ericp at snf.stanford.edu Sat Apr 19 08:30:19 2003 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Apr 19, 2003 8:30:19 PM Subject: Problem karlsuss 2003-04-19 20:30:18: lamp out Message-ID: The lamp supply indicates "INTlock" and the machine indicates "lamp housing not in rear position- move manually". From vilanova at snf.stanford.edu Mon Apr 21 07:43:00 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Apr 21, 2003 7:43:00 AM Subject: Problem karlsuss 2003-04-19 20:30:18: Report Clear for karlsuss Message-ID: someone forced the lamphouse out of home position , also the microscope was on the parked position all the way to the top. From jdas at snf.stanford.edu Mon Apr 21 01:08:33 2003 From: jdas at snf.stanford.edu (jdas at snf.stanford.edu) Date: Apr 21, 2003 1:08:33 PM Subject: Problem karlsuss 2003-04-21 13:08:32: one set screw found on the mask holder Message-ID: It must have dropped off during my exposures etc. I stored it in the EVbonder pressure plate storage box in a ZIplock bag. From vilanova at snf.stanford.edu Mon Apr 21 01:33:41 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Apr 21, 2003 1:33:41 PM Subject: Problem karlsuss 2003-04-21 13:08:32: Report Clear for karlsuss Message-ID: Set screw back on mask holder. From acremann at snf.stanford.edu Wed Apr 23 07:26:01 2003 From: acremann at snf.stanford.edu (acremann at snf.stanford.edu) Date: Apr 23, 2003 7:26:01 PM Subject: Problem karlsuss 2003-04-23 19:25:58: Report Problem for karlsuss Message-ID: The frontside microscope makes a squeeking noise when moving down. Still working without problems. From vilanova at snf.stanford.edu Thu Apr 24 09:33:30 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Apr 24, 2003 9:33:30 AM Subject: Problem karlsuss 2003-04-23 19:25:58: Report Clear for karlsuss Message-ID: Latching sound is normal . From zheng at snf.stanford.edu Tue Apr 29 06:02:00 2003 From: zheng at snf.stanford.edu (zheng at snf.stanford.edu) Date: Apr 29, 2003 6:02:00 PM Subject: Problem karlsuss 2003-04-29 18:01:59: Report Problem for karlsuss Message-ID: Machine come to the status all the sudden with the message of "watach out" for x-y stage while on normal operation ......can not access to regular operation buttons afterward......leave in this stage and disabled the machine to get mask out. From martinez at snf.stanford.edu Wed Apr 30 09:10:52 2003 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Apr 30, 2003 9:10:52 AM Subject: Problem karlsuss 2003-04-29 18:01:59: Report Clear for karlsuss Message-ID: wec was not centered. centered wec, initialized system. ready for use