From martinez at snf.stanford.edu Fri May 7 14:46:55 2004 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Fri, 7 May 2004 14:46:55 -0700 Subject: Comment karlsuss 2004-05-07 14:46:54: lamp change Message-ID: 365nm installed, CI2 = 15mw/cm2 uniformity = 2.31 % From zappe at snf.stanford.edu Sun May 9 16:08:43 2004 From: zappe at snf.stanford.edu (zappe at snf.stanford.edu) Date: Sun, 9 May 2004 16:08:43 -0700 Subject: Problem karlsuss 2004-05-09 16:08:42: x-limit switch active Message-ID: impossible to move backside microsope in either x-direction From barlian at snf.stanford.edu Sun May 9 21:07:58 2004 From: barlian at snf.stanford.edu (barlian at snf.stanford.edu) Date: Sun, 9 May 2004 21:07:58 -0700 Subject: Comment karlsuss 2004-05-09 21:07:57: I concur with zappe (the above message) Message-ID: From martinez at snf.stanford.edu Mon May 10 09:01:49 2004 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Mon, 10 May 2004 09:01:49 -0700 Subject: Problem karlsuss 2004-05-09 16:08:42: x-limit switch active Message-ID: reinitialized & set up default parameters, test bsa system. From hanjun at snf.stanford.edu Tue May 18 21:51:01 2004 From: hanjun at snf.stanford.edu (hanjun at snf.stanford.edu) Date: Tue, 18 May 2004 21:51:01 -0700 Subject: Problem karlsuss 2004-05-18 21:51:00: the machine window is not in the 'ready' mode... Message-ID: From hanjun at snf.stanford.edu Tue May 18 22:23:10 2004 From: hanjun at snf.stanford.edu (hanjun at snf.stanford.edu) Date: Tue, 18 May 2004 22:23:10 -0700 Subject: Comment karlsuss 2004-05-18 22:23:09: above problem was cleared by rebooting Message-ID: the machine was rebooted, got the chuck into the center, and wa brought back to the normal 'ready' mode From vilanova at snf.stanford.edu Wed May 19 06:49:41 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 06:49:41 -0700 Subject: Comment karlsuss 2004-05-18 22:23:09: above problem was cleared by rebooting Message-ID: problem cleared by user. From vilanova at snf.stanford.edu Wed May 19 06:50:07 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 06:50:07 -0700 Subject: Problem karlsuss 2004-05-18 21:51:00: the machine window is not in the 'ready' mode... Message-ID: Problem cleared by user. From vilanova at snf.stanford.edu Wed May 19 07:45:06 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 07:45:06 -0700 Subject: Comment karlsuss 2004-05-19 07:45:06: Under deep UV mode 'til friday at 4:00PM Message-ID: Under Deep UV Mode Until Friday 5/21/04 at 4:00PM From vilanova at snf.stanford.edu Wed May 19 07:45:21 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 07:45:21 -0700 Subject: Comment karlsuss 2004-04-23 10:19:42: Deep UV Message-ID: Comment cleared From vilanova at snf.stanford.edu Wed May 19 07:45:31 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 07:45:31 -0700 Subject: Comment karlsuss 2004-04-26 07:33:24: Lamp back tor normal MOde Message-ID: Comment cleared. From vilanova at snf.stanford.edu Wed May 19 07:45:41 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 07:45:41 -0700 Subject: Comment karlsuss 2004-05-07 14:46:54: lamp change Message-ID: Comment CLeared. From vilanova at snf.stanford.edu Wed May 19 07:45:54 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 19 May 2004 07:45:54 -0700 Subject: Comment karlsuss 2004-05-09 21:07:57: I concur with zappe (the above message) Message-ID: Comment Cleared . From vilanova at snf.stanford.edu Fri May 21 10:38:54 2004 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 21 May 2004 10:38:54 -0700 Subject: Comment karlsuss 2004-05-21 10:38:53: Back to normal MOde Message-ID: Back to normal mode CI2 = 15Mw/cm2 Uniformity = 2 % :-)