From jesselu at snf.stanford.edu Mon Jun 9 10:12:01 2008 From: jesselu at snf.stanford.edu (jesselu at snf.stanford.edu) Date: Mon, 9 Jun 2008 10:12:01 -0700 Subject: Problem karlsuss SNF 2008-06-09 10:12:01: theta out of range error Message-ID: While unloading the sample, I got the theta out of range error (along with the beeping). I centered the rotation axis, but the beeping continued. The machine does not seem to respond to any buttons at this point either. From vilanova at snf.stanford.edu Mon Jun 9 10:28:53 2008 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 9 Jun 2008 10:28:53 -0700 Subject: Problem karlsuss SNF 2008-06-09 10:12:01: theta out of range error Message-ID: re initialized system software , ok to use From vilanova at snf.stanford.edu Wed Jun 18 07:57:31 2008 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 18 Jun 2008 07:57:31 -0700 Subject: Comment karlsuss SNF 2008-06-18 07:57:31: lamp re calibration Message-ID: Someone reported to me that the power supply was beeping yesterday Afternoon , I just finished re calibrating the lamp, no more beeps and calibration es within specs Intensity 15Mw/Cm2 Uniformity = 1.92% From vilanova at snf.stanford.edu Tue Jun 24 07:56:26 2008 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 24 Jun 2008 07:56:26 -0700 Subject: Shutdown karlsuss SNF 2008-06-24 07:56:25: monthly lamp change in progress...... Message-ID: From vilanova at snf.stanford.edu Tue Jun 24 14:12:42 2008 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Tue, 24 Jun 2008 14:12:42 -0700 Subject: Shutdown karlsuss SNF 2008-06-24 07:56:25: monthly lamp change in progress...... Message-ID: Monthly lamp completed ( sorry for the delay but we found a problem with one of the sensor, took care of the problem and calibrated the lamp) Intensity= 15mw/Cm2 Uniformity = 1.30%