From vilanova at snf.stanford.edu  Fri May  9 07:21:08 2008
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Fri, 9 May 2008 07:21:08 -0700
Subject: Shutdown karlsuss SNF 2008-05-09 07:21:07: monthly Pm and lamp change in progress.... 
Message-ID: <mailman.1156.1357938457.25750.karlsuss-pcs@snf.stanford.edu>




From vilanova at snf.stanford.edu  Fri May  9 08:16:28 2008
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Fri, 9 May 2008 08:16:28 -0700
Subject: Shutdown karlsuss SNF 2008-05-09 07:21:07: monthly Pm and lamp change in progress.... 
Message-ID: <mailman.1157.1357938457.25750.karlsuss-pcs@snf.stanford.edu>

Monthly Lamp Change Completed:
Intensity = 15Mw/Cm2
Uniformity = 2%



From mislam at snf.stanford.edu  Sun May 11 21:35:37 2008
From: mislam at snf.stanford.edu (mislam at snf.stanford.edu)
Date: Sun, 11 May 2008 21:35:37 -0700
Subject: Problem karlsuss SNF 2008-05-11 21:35:37: No illumination on top microscope
Message-ID: <mailman.1158.1357938457.25750.karlsuss-pcs@snf.stanford.edu>

Couldnot get image from top microscope



From vilanova at snf.stanford.edu  Mon May 12 07:46:37 2008
From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu)
Date: Mon, 12 May 2008 07:46:37 -0700
Subject: Problem karlsuss SNF 2008-05-11 21:35:37: No illumination on top microscope
Message-ID: <mailman.1159.1357938457.25750.karlsuss-pcs@snf.stanford.edu>

Replaced bad TOp MIcorscope Lamp , system tested and 
ready to use. 



From gsosa at snf.stanford.edu  Tue May 20 09:25:12 2008
From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu)
Date: Tue, 20 May 2008 09:25:12 -0700
Subject: Shutdown karlsuss SNF 2008-05-20 09:25:12: Focus motor replacement
Message-ID: <mailman.1160.1357938457.25750.karlsuss-pcs@snf.stanford.edu>

FSE here to replace the BSA focus motor



From gsosa at snf.stanford.edu  Tue May 20 13:44:57 2008
From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu)
Date: Tue, 20 May 2008 13:44:57 -0700
Subject: Shutdown karlsuss SNF 2008-05-20 09:25:12: Focus motor replacement
Message-ID: <mailman.1161.1357938457.25750.karlsuss-pcs@snf.stanford.edu>

FSE replaced and setup the right-side BSA focus motor. He also reseated some conectors for the top-side microscopes. Checked and adjusted the ALU300 microscope controller for travel and centering. Checked and adjusted the topside microscope to eliminate a metal to metal friction point and lubricated microscome pivot bearings. System ready to use in topside and abck-side alignment.



From gsosa at snf.stanford.edu  Tue May 20 13:45:13 2008
From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu)
Date: Tue, 20 May 2008 13:45:13 -0700
Subject: Problem karlsuss SNF 2008-03-20 11:07:23: Top Side align Only
Message-ID: <mailman.1162.1357938457.25750.karlsuss-pcs@snf.stanford.edu>

FSE replaced and setup the right-side BSA focus motor. He also reseated some conectors for the top-side microscopes. Checked and adjusted the ALU300 microscope controller for travel and centering. Checked and adjusted the topside microscope to eliminate a metal to metal friction point and lubricated microscome pivot bearings. System ready to use in topside and abck-side alignment.