From kbohl at snf.stanford.edu Wed Jul 14 14:50:54 2010 From: kbohl at snf.stanford.edu (kbohl at snf.stanford.edu) Date: Wed, 14 Jul 2010 14:50:54 -0700 Subject: Comment karlsuss SNF 2010-07-14 14:50:53: "Unload" light on Karlsuss out? Message-ID: When my lab partner and I used the Karlsuss on Monday (7/12) morning, the "Unload" button light did not flash as it was supposed to when we pressed the "Load" button (Load Wafer Step 1). Besides this, we had no problems with the machine, so our guess is that the light for the "Unload" button is simply burned out. From vilanova at snf.stanford.edu Thu Jul 15 08:19:10 2010 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Thu, 15 Jul 2010 08:19:10 -0700 Subject: Comment karlsuss SNF 2010-07-14 14:50:53: "Unload" light on Karlsuss out? Message-ID: checked load and unload buttons, tested a few times and load & unload light buttons are fine, Light is on when you press it. ok to use. Also Calibrated lamp , Intensity = 14.8mw./Cm2 From vilanova at snf.stanford.edu Mon Jul 26 08:30:39 2010 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 26 Jul 2010 08:30:39 -0700 Subject: Comment karlsuss SNF 2010-07-26 08:30:38: MOnthly Lamp change Completed Message-ID: MOnthly Lamp change and calibration Completed Intensity = 15.1mw/Cm2 Uniformity 2%