From martinez at snf.stanford.edu Fri Jan 10 03:35:57 2003 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Jan 10, 2003 3:35:57 PM Subject: Shutdown karlsuss2 2003-01-10 15:35:57: shutdown KS2 Message-ID: z-motor failure. From martinez at snf.stanford.edu Mon Jan 13 10:25:13 2003 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Jan 13, 2003 10:25:13 AM Subject: Shutdown karlsuss2 2003-01-10 15:35:57: shutdown KS2 Message-ID: adj wec brake and wec home sensors. reseated z motor cable. cycled test wafers. ready for use From kjliu at snf.stanford.edu Mon Jan 13 07:58:35 2003 From: kjliu at snf.stanford.edu (kjliu at snf.stanford.edu) Date: Jan 13, 2003 7:58:35 PM Subject: Problem karlsuss2 2003-01-13 19:58:34: TSA microscope does not move smoothly Message-ID: microscope gets stuck going both up and down every once in a while From martinez at snf.stanford.edu Tue Jan 14 09:26:17 2003 From: martinez at snf.stanford.edu (martinez at snf.stanford.edu) Date: Jan 14, 2003 9:26:17 AM Subject: Problem karlsuss2 2003-01-13 19:58:34: TSA microscope does not move smoothly Message-ID: adj tsa up pressure. unit needs to be rebuilt----- From dcchu at snf.stanford.edu Fri Jan 24 05:24:56 2003 From: dcchu at snf.stanford.edu (dcchu at snf.stanford.edu) Date: Jan 24, 2003 5:24:56 PM Subject: Shutdown karlsuss2 2003-01-24 17:24:56: microscope does not move down after exposure Message-ID: From dcchu at snf.stanford.edu Fri Jan 24 06:38:09 2003 From: dcchu at snf.stanford.edu (dcchu at snf.stanford.edu) Date: Jan 24, 2003 6:38:09 PM Subject: Problem karlsuss2 2003-01-24 18:38:09: Microscope does not move and key board locked Message-ID: After the exposure, the microscope does not move down to regular position. The screen shows: Microscope down move time out The "enter" key keeps blinking but other keys are locked. From vilanova at snf.stanford.edu Mon Jan 27 07:18:16 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Jan 27, 2003 7:18:16 AM Subject: Problem karlsuss2 2003-01-24 18:38:09: Microscope does not move and key board locked Message-ID: MIcroscope FOund on parking position ( All the way to the top ) when this happens the sensor cant read the microscope. Reset microscope, tested ( several Times) working ok. From vilanova at snf.stanford.edu Mon Jan 27 07:19:27 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Jan 27, 2003 7:19:27 AM Subject: Shutdown karlsuss2 2003-01-24 17:24:56: microscope does not move down after exposure Message-ID: MIcroscope out of sensor reach , reseted microscope tested ok , ready to use . From mahnaz at snf.stanford.edu Wed Jan 29 02:56:37 2003 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Jan 29, 2003 2:56:37 PM Subject: Shutdown karlsuss2 2003-01-29 14:56:37: loss of mask vaccum Message-ID: it might be due to the new ks coming. From vilanova at snf.stanford.edu Wed Jan 29 03:26:03 2003 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Jan 29, 2003 3:26:03 PM Subject: Shutdown karlsuss2 2003-01-29 14:56:37: loss of mask vaccum Message-ID: mask vacuum got disconnected by mistake, mask vacuum On now , ok to use