From gsosa at snf.stanford.edu Thu Jul 2 08:39:30 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Thu, 2 Jul 2009 08:39:30 -0700 Subject: Shutdown karlsuss2 SNF 2009-07-02 08:39:29: scheduled lamp change Message-ID: Lamp change in progress From gsosa at snf.stanford.edu Thu Jul 2 09:38:00 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Thu, 2 Jul 2009 09:38:00 -0700 Subject: Shutdown karlsuss2 SNF 2009-07-02 08:39:29: scheduled lamp change Message-ID: Lamp Change completed. Calibrated intensity to 15.0 mw/cm2. Uniformity at 2.2% From mkerby at snf.stanford.edu Thu Jul 9 15:08:57 2009 From: mkerby at snf.stanford.edu (mkerby at snf.stanford.edu) Date: Thu, 9 Jul 2009 15:08:57 -0700 Subject: Problem karlsuss2 SNF 2009-07-09 15:08:56: enter button not responding Message-ID: I could not remove my mask from the holder. The change mask function worked to allow me to pull the large metal plate from the stage holder. When the plate was properly inverted in the loading dock holder, the enter button would not respond and I could not disable the mask vacuum. I had to use the quick disconnect for the vacuum hose to remove the mask. The system appears stuck. From vilanova at snf.stanford.edu Fri Jul 10 11:41:48 2009 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 10 Jul 2009 11:41:48 -0700 Subject: Problem karlsuss2 SNF 2009-07-09 15:08:56: enter button not responding Message-ID: restarted the system, checked and tested, everything Looks Fine, Sometimes people press the buttons twive by mistake or put their wafers Boxes Over the panel ,all they have to do is press the button that is flashing and not push all of them just to see if it works. Ok to use. From lindaw at snf.stanford.edu Fri Jul 17 14:49:17 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Fri, 17 Jul 2009 14:49:17 -0700 Subject: Comment karlsuss2 SNF 2009-07-17 14:49:16: I finished with the Karlsuss2 at 12:10pm Fri. Message-ID: I could not disable due to the coral system being locked up/crashed. If coral is back up, please enable over me, or disable the equipment. Thank you. From bilee at snf.stanford.edu Mon Jul 27 00:25:34 2009 From: bilee at snf.stanford.edu (bilee at snf.stanford.edu) Date: Mon, 27 Jul 2009 00:25:34 -0700 Subject: Problem karlsuss2 SNF 2009-07-27 00:25:34: the indicator of rotation angle is loose Message-ID: From vilanova at snf.stanford.edu Mon Jul 27 07:40:58 2009 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 27 Jul 2009 07:40:58 -0700 Subject: Problem karlsuss2 SNF 2009-07-27 00:25:34: the indicator of rotation angle is loose Message-ID: Indicatior? I checked rotation and everything else, everything seems to be normal., ok to use.