From bchui at snf.stanford.edu Mon Mar 1 00:18:34 2010 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Mon, 1 Mar 2010 00:18:34 -0800 Subject: Problem karlsuss2 SNF 2010-03-01 00:18:34: Microscope X,Y buttons frozen again Message-ID: Probably needs a reset From vilanova at snf.stanford.edu Mon Mar 1 08:02:01 2010 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 1 Mar 2010 08:02:01 -0800 Subject: Problem karlsuss2 SNF 2010-03-01 00:18:34: Microscope X,Y buttons frozen again Message-ID: Dont know if this is happening because user has wafer pieces and the Objectives Are been moved beyond the limits, Please use the small pieces chuck or if not use the regular wafer chuck but dont forget to cover one of the vacuum holes ( theres to of them one on the bottom Chuck and the other one that should be use to keep the wafer piece in place is on the top right hand size. ) tested ok to use. From gsosa at snf.stanford.edu Fri Mar 12 09:05:54 2010 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Fri, 12 Mar 2010 09:05:54 -0800 Subject: Comment karlsuss2 SNF 2010-03-12 09:05:54: Scheduled lamp changed Message-ID: Changed th UV lamp. Intensity set at 15.0 Mw/cm2, Unif: 1.3%