From vilanova at snf.stanford.edu Fri Apr 1 09:29:33 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 1 Apr 2011 09:29:33 -0700 Subject: Shutdown karlsuss2 SNF 2011-04-01 09:29:33: Monthly lamp change in progress.... Message-ID: From vilanova at snf.stanford.edu Fri Apr 1 10:03:47 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 1 Apr 2011 10:03:47 -0700 Subject: Shutdown karlsuss2 SNF 2011-04-01 09:29:33: Monthly lamp change in progress.... Message-ID: Monthly lamp change completed Intensity = 15Mw/Cm2 Uniformity = 1% From vilanova at snf.stanford.edu Fri Apr 1 10:54:23 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Fri, 1 Apr 2011 10:54:23 -0700 Subject: Comment karlsuss2 SNF 2011-04-01 10:54:23: Monthly Lamp change and calibration Message-ID: Monthly Lamp Change and Calibration completed: Average Intensity = 15Mw/Cm2 Uniformity = 1% From zeyuan at snf.stanford.edu Sat Apr 2 07:39:51 2011 From: zeyuan at snf.stanford.edu (zeyuan at snf.stanford.edu) Date: Sat, 2 Apr 2011 07:39:51 -0700 Subject: Problem karlsuss2 SNF 2011-04-02 07:39:50: y axis hard to move Message-ID: y axis very hard to move before use. Still ok to align but doesn't seeem a good idea to force the movement of y axis too much. From vilanova at snf.stanford.edu Mon Apr 4 09:30:02 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 4 Apr 2011 09:30:02 -0700 Subject: Problem karlsuss2 SNF 2011-04-02 07:39:50: y axis hard to move Message-ID: Repaired Micrometer ( now is nice and smooth ) Also cleaned Up the chuck ( the one without the Oring) the chuck wasnt holding vacuum probably because it was dirty Please clean up after using tape on it, also I found a few resist spot on it , Clean before and after use. tested ok , good to use. From npapte at snf.stanford.edu Wed Apr 13 10:33:05 2011 From: npapte at snf.stanford.edu (npapte at snf.stanford.edu) Date: Wed, 13 Apr 2011 10:33:05 -0700 Subject: Problem karlsuss2 SNF 2011-04-13 10:33:05: poor alignment Message-ID: features are misaligned by ~2.5 um. The problem is more severe on the right microscope, which seems to moves laterally when changing focus From lindaw at snf.stanford.edu Wed Apr 13 12:52:48 2011 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Wed, 13 Apr 2011 12:52:48 -0700 Subject: Problem karlsuss2 SNF 2011-04-13 12:52:48: lamp intensity CI1 is only 6.6, should be 15.0 Message-ID: lamp intensity of CI1 is only 6.6. does not beep alarm for low intensity. Has someone reset this? From vilanova at snf.stanford.edu Wed Apr 13 14:16:25 2011 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 13 Apr 2011 14:16:25 -0700 Subject: Problem karlsuss2 SNF 2011-04-13 12:52:48: lamp intensity CI1 is only 6.6, should be 15.0 Message-ID: Recalibrated lamp CI1 back to = 15.0 Mw/Cm2. From mahnaz at snf.stanford.edu Thu Apr 14 09:02:24 2011 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Thu, 14 Apr 2011 09:02:24 -0700 Subject: Problem karlsuss2 SNF 2011-04-13 10:33:05: poor alignment Message-ID: user wafer was bonded to another wafer ( fragile sample) we think that bonding might have caused the surface of the wafer be uneven. From bchui at snf.stanford.edu Thu Apr 21 18:31:41 2011 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Thu, 21 Apr 2011 18:31:41 -0700 Subject: Shutdown karlsuss2 SNF 2011-04-21 18:31:41: machine frozen Message-ID: does not respond to any keypresses even when enabled. From bchui at snf.stanford.edu Thu Apr 21 18:40:09 2011 From: bchui at snf.stanford.edu (bchui at snf.stanford.edu) Date: Thu, 21 Apr 2011 18:40:09 -0700 Subject: Comment karlsuss2 SNF 2011-04-21 18:40:08: Shutdown by mistake Message-ID: i meant to shut down KS1 but the cursor must have jumped and i ended up shutting down KS2 instead. I've informed Mary about the mistake and she'll login and clear the shutdown in a couple of hours. From mtang at snf.stanford.edu Thu Apr 21 19:31:51 2011 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Thu, 21 Apr 2011 19:31:51 -0700 Subject: Shutdown karlsuss2 SNF 2011-04-21 18:31:41: machine frozen Message-ID: Shutdown by mistake - see comment. From mtang at snf.stanford.edu Thu Apr 21 19:32:07 2011 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Thu, 21 Apr 2011 19:32:07 -0700 Subject: Comment karlsuss2 SNF 2011-04-21 18:40:08: Shutdown by mistake Message-ID: Removed from shutdown. From zeyuan at snf.stanford.edu Tue Apr 26 10:18:17 2011 From: zeyuan at snf.stanford.edu (zeyuan at snf.stanford.edu) Date: Tue, 26 Apr 2011 10:18:17 -0700 Subject: Shutdown karlsuss2 SNF 2011-04-26 10:18:17: Can't reset after overcurrent error Message-ID: From maurice at snf.stanford.edu Tue Apr 26 10:50:12 2011 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 26 Apr 2011 10:50:12 -0700 Subject: Shutdown karlsuss2 SNF 2011-04-26 10:18:17: Can't reset after overcurrent error Message-ID: resarted system...seems ok.. as per JProvine