From popomoo at snf.stanford.edu Tue Apr 3 18:20:09 2012 From: popomoo at snf.stanford.edu (popomoo at snf.stanford.edu) Date: Tue, 3 Apr 2012 18:20:09 -0700 Subject: Problem karlsuss2 SNF 2012-04-03 18:20:09: 'Reset Failed' Message-ID: Before pressing the Expose button, everything looked ok. When I pressed 'Expose' button, the error msg showed up. 'Machine failed. Press 'Load' button to reset' However, when I pressed the 'Load' buttoon, it kept failing to reset. I could not use it at all. From vilanova at snf.stanford.edu Wed Apr 4 07:58:11 2012 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Wed, 4 Apr 2012 07:58:11 -0700 Subject: Problem karlsuss2 SNF 2012-04-03 18:20:09: 'Reset Failed' Message-ID: Theta Micrometer Was Moved Too far away, Therefore It couldnt Come back to home position, Re initialized the system and centered X , Y and theta , Tested, Ok to use From mahnaz at snf.stanford.edu Wed Apr 4 09:34:16 2012 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Wed, 4 Apr 2012 09:34:16 -0700 Subject: Problem karlsuss2 SNF 2011-12-08 18:38:16: Misalignment ~10 um Message-ID: I have posted fuoll expalnation of Align cont/expo button Vs. Alignment button. From gsosa at snf.stanford.edu Mon Apr 23 11:10:44 2012 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Mon, 23 Apr 2012 11:10:44 -0700 Subject: Comment karlsuss2 SNF 2012-04-23 11:10:43: Scheduled lamp change 4/23 Message-ID: Replaced and calibrated UV lamp. Unif: 2.3%, Ave : 14.97Mw/cm2 From cechang at snf.stanford.edu Mon Apr 23 14:08:34 2012 From: cechang at snf.stanford.edu (cechang at snf.stanford.edu) Date: Mon, 23 Apr 2012 14:08:34 -0700 Subject: Problem karlsuss2 SNF 2012-04-23 14:08:34: Cannot turn on the monitor Message-ID: As title From vilanova at snf.stanford.edu Mon Apr 23 14:36:27 2012 From: vilanova at snf.stanford.edu (vilanova at snf.stanford.edu) Date: Mon, 23 Apr 2012 14:36:27 -0700 Subject: Problem karlsuss2 SNF 2012-04-23 14:08:34: Cannot turn on the monitor Message-ID: MOnitor is Fine, Someone had it almost disconnect it From the back, Ok to use. From uli at snf.stanford.edu Tue Apr 24 10:42:44 2012 From: uli at snf.stanford.edu (uli at snf.stanford.edu) Date: Tue, 24 Apr 2012 10:42:44 -0700 Subject: Problem karlsuss2 SNF 2012-04-24 10:42:44: objective head too low, can't move it up. Message-ID: From mahnaz at snf.stanford.edu Tue Apr 24 10:51:42 2012 From: mahnaz at snf.stanford.edu (mahnaz at snf.stanford.edu) Date: Tue, 24 Apr 2012 10:51:42 -0700 Subject: Shutdown karlsuss2 SNF 2012-04-24 10:51:42: Objective is too close to mask holder Message-ID: coars focus is stuck as well. From gsosa at snf.stanford.edu Tue Apr 24 12:08:38 2012 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Tue, 24 Apr 2012 12:08:38 -0700 Subject: Shutdown karlsuss2 SNF 2012-04-24 10:51:42: Objective is too close to mask holder Message-ID: Adjusted coarse focus knob back to center. Checked out focus with test mask. All OK From gsosa at snf.stanford.edu Tue Apr 24 12:09:04 2012 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Tue, 24 Apr 2012 12:09:04 -0700 Subject: Problem karlsuss2 SNF 2012-04-24 10:42:44: objective head too low, can't move it up. Message-ID: Adjusted coarse focus knob back to center. Checked out focus with test mask. All OK From clee58 at snf.stanford.edu Fri Apr 27 22:51:54 2012 From: clee58 at snf.stanford.edu (clee58 at snf.stanford.edu) Date: Fri, 27 Apr 2012 22:51:54 -0700 Subject: Problem karlsuss2 SNF 2012-04-27 22:51:54: Monitor is off. Can't turn on. Message-ID: From gsosa at snf.stanford.edu Mon Apr 30 09:43:31 2012 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Mon, 30 Apr 2012 09:43:31 -0700 Subject: Problem karlsuss2 SNF 2012-04-27 22:51:54: Monitor is off. Can't turn on. Message-ID: Checked out monitor. Looks OK.