From vilanova at stanford.edu Fri Mar 1 08:04:29 2013 From: vilanova at stanford.edu (vilanova at stanford.edu) Date: Fri, 1 Mar 2013 08:04:29 -0800 (PST) Subject: [karlsuss2-pcs] Comment karlsuss2 SNF 2013-03-01 08:04:28: BSA lamp Message-ID: <17741109.0.1362153869178.JavaMail.coral@snc-coraldb.stanford.edu> one of the BSa light was reported as been out, Checked it, it wasnt out just , Adjusted the lamp Intensity and tested, Ok good to use. From gsosa at stanford.edu Fri Mar 1 15:55:08 2013 From: gsosa at stanford.edu (gsosa at stanford.edu) Date: Fri, 1 Mar 2013 15:55:08 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-01 15:55:07: Top Align Only 3/1 Message-ID: <22372916.17.1362182108199.JavaMail.coral@snc-coraldb.stanford.edu> Illumination issue with left BSA microscope. Suspect problem in microscope head or fiber-optic bundle. Contacting Suss Microtec for service call. From apal at stanford.edu Sat Mar 2 03:32:36 2013 From: apal at stanford.edu (apal at stanford.edu) Date: Sat, 2 Mar 2013 03:32:36 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-02 03:32:36: Machine cannot load Message-ID: <14696971.0.1362223956996.JavaMail.coral@snc-coraldb.stanford.edu> Hi, During my use, the machine restarted and now it says that it cannot load due to some Z-axis error. - Ashish (apal) From apal at stanford.edu Sat Mar 2 03:33:47 2013 From: apal at stanford.edu (apal at stanford.edu) Date: Sat, 2 Mar 2013 03:33:47 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-02 03:33:46: Z-axis error Message-ID: <7118534.1.1362224027165.JavaMail.coral@snc-coraldb.stanford.edu> Hi I am not shutting down the machine so that some other expert users can have a look at it. - Ashish(apal) From dwnam at stanford.edu Sat Mar 2 16:17:31 2013 From: dwnam at stanford.edu (dwnam at stanford.edu) Date: Sat, 2 Mar 2013 16:17:31 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-02 16:17:30: Lamp is off Message-ID: <17209314.7.1362269851642.JavaMail.coral@snc-coraldb.stanford.edu> Looks like the lamp is off (it says RDY on the front pannel.) During exposure, the lamp does not go on. From dwnam at stanford.edu Sat Mar 2 16:26:21 2013 From: dwnam at stanford.edu (Donguk Nam) Date: Sat, 2 Mar 2013 16:26:21 -0800 (PST) Subject: [karlsuss2-pcs] [Karlsuss] Both Karlsuss 1 & 2 not working In-Reply-To: <1502165705.11416487.1362270279827.JavaMail.root@stanford.edu> Message-ID: <111346749.11416725.1362270381048.JavaMail.root@stanford.edu> Dear Karlsuss users, Both KS 1&2 do not work. I reported the problems for both. If anybody figures out the problems and fixes them over the weekend, please let me know. I need to do the process over this weekend. Best regards, Donguk From gsosa at stanford.edu Sat Mar 2 21:31:04 2013 From: gsosa at stanford.edu (gsosa at stanford.edu) Date: Sat, 2 Mar 2013 21:31:04 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-02 16:17:30: Lamp is off Message-ID: <32681901.9.1362288664594.JavaMail.coral@snc-coraldb.stanford.edu> Replaced the UV lamp. Adjusted lamp position to peak lamp intensity. Calibrated lamp power supply to 15 mw.cm2, Unif: 2.3. Tested system operation- All OK. From gsosa at stanford.edu Sat Mar 2 21:31:11 2013 From: gsosa at stanford.edu (gsosa at stanford.edu) Date: Sat, 2 Mar 2013 21:31:11 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-02 03:33:46: Z-axis error Message-ID: <31249565.10.1362288671622.JavaMail.coral@snc-coraldb.stanford.edu> Replaced the UV lamp. Adjusted lamp position to peak lamp intensity. Calibrated lamp power supply to 15 mw.cm2, Unif: 2.3. Tested system operation- All OK. From gsosa at stanford.edu Sat Mar 2 21:31:16 2013 From: gsosa at stanford.edu (gsosa at stanford.edu) Date: Sat, 2 Mar 2013 21:31:16 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-02 03:32:36: Machine cannot load Message-ID: <29308185.11.1362288676645.JavaMail.coral@snc-coraldb.stanford.edu> Replaced the UV lamp. Adjusted lamp position to peak lamp intensity. Calibrated lamp power supply to 15 mw.cm2, Unif: 2.3. Tested system operation- All OK. From gsosa at stanford.edu Fri Mar 8 10:24:40 2013 From: gsosa at stanford.edu (gsosa at stanford.edu) Date: Fri, 8 Mar 2013 10:24:40 -0800 (PST) Subject: [karlsuss2-pcs] Problem karlsuss2 SNF 2013-03-01 15:55:07: Top Align Only 3/1 Message-ID: <4825390.111.1362767080371.JavaMail.coral@snc-coraldb.stanford.edu> Troubleshot and found a stuck optical element in the left BSA microscope. This was blocking the light path from the illuminator and prevented the high/low magnification from working. made a mechanical adjustment inside the BSA microscope to resolve the binding issue. Tested magnigication- OK. Left BSA illumination OK now. verified with mask. BSA is back to same state. It may be usable for some. Still planning to bring Suss Microtec in to tune up the BSA system. From gsosa at stanford.edu Fri Mar 8 10:25:04 2013 From: gsosa at stanford.edu (gsosa at stanford.edu) Date: Fri, 8 Mar 2013 10:25:04 -0800 (PST) Subject: [karlsuss2-pcs] Comment karlsuss2 SNF 2013-03-08 10:25:04: Update 3/8 Message-ID: <21762269.112.1362767104433.JavaMail.coral@snc-coraldb.stanford.edu> Troubleshot and found a stuck optical element in the left BSA microscope. This was blocking the light path from the illuminator and prevented the high/low magnification from working. made a mechanical adjustment inside the BSA microscope to resolve the binding issue. Tested magnigication- OK. Left BSA illumination OK now. verified with mask. BSA is back to same state. It may be usable for some. Still planning to bring Suss Microtec in to tune up the BSA system. From apal at stanford.edu Sun Mar 17 19:35:39 2013 From: apal at stanford.edu (apal at stanford.edu) Date: Sun, 17 Mar 2013 19:35:39 -0700 (PDT) Subject: [karlsuss2-pcs] Comment karlsuss2 SNF 2013-03-17 19:35:39: Problem in light Message-ID: <32962064.75.1363574139516.JavaMail.coral@snc-coraldb.stanford.edu> Hi, Most probably the microscope and light is misaligned. I am not very sure and I hope somebody will look into it soon. - Ashish (apal) From vilanova at stanford.edu Mon Mar 18 08:51:15 2013 From: vilanova at stanford.edu (vilanova at stanford.edu) Date: Mon, 18 Mar 2013 08:51:15 -0700 (PDT) Subject: [karlsuss2-pcs] Comment karlsuss2 SNF 2013-03-17 19:35:39: Problem in light Message-ID: <15031865.79.1363621875221.JavaMail.coral@snc-coraldb.stanford.edu> THE INTENSITY LEFT SIDE PIN ( I,M ASSUMING THE TOP MICROSCOPE WAS THE ONE WITH THE ISSUE) WAS MOVED ALMOST TO CLOSE POSITION ,MOVED THE PIN TO OPEN ILUMINATION SOURCE AND LIGHT BOTTOM AND TOP ARE WORKING FINETESTED OK TO USE. From apal at stanford.edu Thu Mar 28 19:41:19 2013 From: apal at stanford.edu (apal at stanford.edu) Date: Thu, 28 Mar 2013 19:41:19 -0700 (PDT) Subject: [karlsuss2-pcs] Comment karlsuss2 SNF 2013-03-28 19:41:18: Macine does not work after restarting Message-ID: <7199495.17.1364524879456.JavaMail.coral@snc-coraldb.stanford.edu> Hi, The keyboard was not responsing so I restarted the machine. After that it is always getting stucked at a page saying "reset mechanism failed". I am not shutting it down so the other expert users may have a look at it. - Ashish (apal) From vilanova at stanford.edu Fri Mar 29 09:05:05 2013 From: vilanova at stanford.edu (vilanova at stanford.edu) Date: Fri, 29 Mar 2013 09:05:05 -0700 (PDT) Subject: [karlsuss2-pcs] Comment karlsuss2 SNF 2013-03-28 19:41:18: Macine does not work after restarting Message-ID: <5339974.22.1364573105684.JavaMail.coral@snc-coraldb.stanford.edu> System has been reseted and tested, Ok to use