From booth at snf.stanford.edu Sun Jun 1 10:52:10 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 1, 2003 10:52:10 AM Subject: Shutdown lampoly 2003-06-01 10:52:06: Report Shutdown for lampoly Message-ID: broken water line From booth at snf.stanford.edu Mon Jun 2 04:58:33 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 2, 2003 4:58:33 PM Subject: Shutdown lampoly 2003-06-01 10:52:06: Report Clear for lampoly Message-ID: replaced broken polyflow water lines to dry-pumps with Teflon, used inserts inside swage fittings to minimize cold-flow of tubing. From booth at snf.stanford.edu Mon Jun 9 08:50:17 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 9, 2003 8:50:17 AM Subject: Shutdown lampoly 2003-06-09 08:50:16: Report Shutdown for lampoly Message-ID: Turbo pumping system not working. From booth at snf.stanford.edu Mon Jun 9 03:05:15 2003 From: booth at snf.stanford.edu (booth at snf.stanford.edu) Date: Jun 9, 2003 3:05:15 PM Subject: Shutdown lampoly 2003-06-09 08:50:16: Report Clear for lampoly Message-ID: Found dry pump for turbo backing was OFF. Pump contactor overcurrent protection had tripped. I reset it & pump started normally. KF-40 seal rings at pump inlet were cracking, so I replaced 2 at each side of the bellows. SS 5/16-18 bolts were galled, replaced 2 bolts. System restarted normally. From latta at snf.stanford.edu Tue Jun 17 03:26:26 2003 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Jun 17, 2003 3:26:26 PM Subject: Problem lampoly 2003-06-17 15:26:25: Report Problem for lampoly Message-ID: Another test From latta at snf.stanford.edu Tue Jun 17 03:27:46 2003 From: latta at snf.stanford.edu (latta at snf.stanford.edu) Date: Jun 17, 2003 3:27:46 PM Subject: Problem lampoly 2003-06-17 15:26:25: Report Clear for lampoly Message-ID: ok