From riteshj at snf.stanford.edu  Sun May  7 13:15:06 2006
From: riteshj at snf.stanford.edu (riteshj at snf.stanford.edu)
Date: Sun, 7 May 2006 13:15:06 -0700
Subject: Problem lampoly SNF 2006-05-07 13:15:06: bus error
Message-ID: <mailman.525.1356282342.4111.lampoly-pcs@snf.stanford.edu>

The screen shows "bus error , trap vector 0". none of the buttons work and the screen seems frozen. 



From cbaxter at snf.stanford.edu  Mon May  8 08:48:16 2006
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Mon, 8 May 2006 08:48:16 -0700
Subject: Problem lampoly SNF 2006-05-07 13:15:06: bus error
Message-ID: <mailman.526.1356282342.4111.lampoly-pcs@snf.stanford.edu>

reboot system.



From cbaxter at snf.stanford.edu  Mon May  8 10:16:01 2006
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Mon, 8 May 2006 10:16:01 -0700
Subject: Shutdown lampoly SNF 2006-05-08 10:16:00: heat exchanger problem
Message-ID: <mailman.527.1356282342.4111.lampoly-pcs@snf.stanford.edu>

the motor on the heat exchanger water pump is bad(dead)



From cbaxter at snf.stanford.edu  Wed May 10 14:20:22 2006
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Wed, 10 May 2006 14:20:22 -0700
Subject: Shutdown lampoly SNF 2006-05-08 10:16:00: heat exchanger problem
Message-ID: <mailman.528.1356282342.4111.lampoly-pcs@snf.stanford.edu>

Changed heat exchanger motor and HBR is back online.



From tura at snf.stanford.edu  Wed May 10 16:47:02 2006
From: tura at snf.stanford.edu (tura at snf.stanford.edu)
Date: Wed, 10 May 2006 16:47:02 -0700
Subject: Problem lampoly SNF 2006-05-10 16:47:01: wafer stuck
Message-ID: <mailman.529.1356282342.4111.lampoly-pcs@snf.stanford.edu>

dummy wafer is stuck in the load chamber. it looks like the pressure target can't be achieved, pressure is too low.



From eenriquez at snf.stanford.edu  Wed May 10 21:41:35 2006
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Wed, 10 May 2006 21:41:35 -0700
Subject: Problem lampoly SNF 2006-05-10 16:47:01: wafer stuck
Message-ID: <mailman.530.1356282342.4111.lampoly-pcs@snf.stanford.edu>

Calibrated the throttle valve controller and zeroed manometer.



From cbaxter at snf.stanford.edu  Thu May 11 09:16:16 2006
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Thu, 11 May 2006 09:16:16 -0700
Subject: Problem lampoly SNF 2006-05-11 09:16:16: CL2 panel problem
Message-ID: <mailman.531.1356282342.4111.lampoly-pcs@snf.stanford.edu>

No CL2 gas,  problem with the gas panel.



From cbaxter at snf.stanford.edu  Thu May 11 09:33:11 2006
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Thu, 11 May 2006 09:33:11 -0700
Subject: Problem lampoly SNF 2006-05-11 09:16:16: CL2 panel problem
Message-ID: <mailman.532.1356282342.4111.lampoly-pcs@snf.stanford.edu>

Cl2 is back online



From shott at snf.stanford.edu  Tue May 30 18:19:51 2006
From: shott at snf.stanford.edu (shott at snf.stanford.edu)
Date: Tue, 30 May 2006 18:19:51 -0700
Subject: Problem lampoly SNF 2006-05-30 18:19:50: No HBr usage ...
Message-ID: <mailman.533.1356282343.4111.lampoly-pcs@snf.stanford.edu>

The HBr cylinder is shut down because of a leak detected late this afternoon.