From lindaw at snf.stanford.edu Thu May 14 13:34:15 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 14 May 2009 13:34:15 -0700 Subject: Comment laurell-R SNF 2009-05-14 13:34:14: unclean Message-ID: The last person to use the laurel couldn't be bothered to clean it when they finished. From ehe at snf.stanford.edu Wed May 27 09:57:11 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 09:57:11 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: The chuck was not clean (when I removed it the threaded part was filled with resist, there was resist on top too) and there was resistance somewhere in the system preventing the motor from turning the chuck. Please fix? From ehe at snf.stanford.edu Wed May 27 10:11:04 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 10:11:04 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: motor is working against some resistance... chuck thread was filled with resist when I found it, removed resist from chuck but did not help From gsosa at snf.stanford.edu Wed May 27 11:29:19 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:19 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From gsosa at snf.stanford.edu Wed May 27 11:29:25 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:25 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From lindaw at snf.stanford.edu Thu May 14 13:34:15 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 14 May 2009 13:34:15 -0700 Subject: Comment laurell-R SNF 2009-05-14 13:34:14: unclean Message-ID: The last person to use the laurel couldn't be bothered to clean it when they finished. From ehe at snf.stanford.edu Wed May 27 09:57:11 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 09:57:11 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: The chuck was not clean (when I removed it the threaded part was filled with resist, there was resist on top too) and there was resistance somewhere in the system preventing the motor from turning the chuck. Please fix? From ehe at snf.stanford.edu Wed May 27 10:11:04 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 10:11:04 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: motor is working against some resistance... chuck thread was filled with resist when I found it, removed resist from chuck but did not help From gsosa at snf.stanford.edu Wed May 27 11:29:19 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:19 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From gsosa at snf.stanford.edu Wed May 27 11:29:25 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:25 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From lindaw at snf.stanford.edu Thu May 14 13:34:15 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 14 May 2009 13:34:15 -0700 Subject: Comment laurell-R SNF 2009-05-14 13:34:14: unclean Message-ID: The last person to use the laurel couldn't be bothered to clean it when they finished. From ehe at snf.stanford.edu Wed May 27 09:57:11 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 09:57:11 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: The chuck was not clean (when I removed it the threaded part was filled with resist, there was resist on top too) and there was resistance somewhere in the system preventing the motor from turning the chuck. Please fix? From ehe at snf.stanford.edu Wed May 27 10:11:04 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 10:11:04 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: motor is working against some resistance... chuck thread was filled with resist when I found it, removed resist from chuck but did not help From gsosa at snf.stanford.edu Wed May 27 11:29:19 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:19 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From gsosa at snf.stanford.edu Wed May 27 11:29:25 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:25 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From lindaw at snf.stanford.edu Thu May 14 13:34:15 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 14 May 2009 13:34:15 -0700 Subject: Comment laurell-R SNF 2009-05-14 13:34:14: unclean Message-ID: The last person to use the laurel couldn't be bothered to clean it when they finished. From ehe at snf.stanford.edu Wed May 27 09:57:11 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 09:57:11 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: The chuck was not clean (when I removed it the threaded part was filled with resist, there was resist on top too) and there was resistance somewhere in the system preventing the motor from turning the chuck. Please fix? From ehe at snf.stanford.edu Wed May 27 10:11:04 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 10:11:04 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: motor is working against some resistance... chuck thread was filled with resist when I found it, removed resist from chuck but did not help From gsosa at snf.stanford.edu Wed May 27 11:29:19 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:19 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From gsosa at snf.stanford.edu Wed May 27 11:29:25 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:25 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From lindaw at snf.stanford.edu Thu May 14 13:34:15 2009 From: lindaw at snf.stanford.edu (lindaw at snf.stanford.edu) Date: Thu, 14 May 2009 13:34:15 -0700 Subject: Comment laurell-R SNF 2009-05-14 13:34:14: unclean Message-ID: The last person to use the laurel couldn't be bothered to clean it when they finished. From ehe at snf.stanford.edu Wed May 27 09:57:11 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 09:57:11 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: The chuck was not clean (when I removed it the threaded part was filled with resist, there was resist on top too) and there was resistance somewhere in the system preventing the motor from turning the chuck. Please fix? From ehe at snf.stanford.edu Wed May 27 10:11:04 2009 From: ehe at snf.stanford.edu (ehe at snf.stanford.edu) Date: Wed, 27 May 2009 10:11:04 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: motor is working against some resistance... chuck thread was filled with resist when I found it, removed resist from chuck but did not help From gsosa at snf.stanford.edu Wed May 27 11:29:19 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:19 -0700 Subject: Shutdown laurell-R SNF 2009-05-27 10:11:03: chuck not spinning Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK. From gsosa at snf.stanford.edu Wed May 27 11:29:25 2009 From: gsosa at snf.stanford.edu (gsosa at snf.stanford.edu) Date: Wed, 27 May 2009 11:29:25 -0700 Subject: Problem laurell-R SNF 2009-05-27 09:57:10: laurell won't spin Message-ID: Freed up spindle shaft. Checked chuck vacuum- OK at 21.6" Tested operation. All OK.