From gsosa at stanford.edu  Wed Jan  5 08:07:27 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Wed, 05 Jan 2011 08:07:27 -0800
Subject: Litho status report 1/5
Message-ID: <4D24973F.3000905@stanford.edu>

Good morning All.....

     Here is the Litho morning status report.

ASML Stepper- Down for annual PM and reticle table problem. FSE to 
continue work today

EVG Spraycoater- Down. Computer OK. Received and will install 
registration code for application software
                                  and continue to bring up tool to 
operational state

Laurell Spinner- Down. Spinner will be delivered today, late AM. 
Installation/testing to follow

SVG Coat 1- Down. Recipe Manager computer being repaired by IT Department

Blue M Ovens 110deg and 150deg- Temperature controllers replaced with 
new digital controllers over
                                                                 the 
shutdown to fix the temperature drift problems

Karl Suss Aligner 1- PM scheduled for today

Karl Suss Aligner 2- Verification of BSA microscope to complete PM. Post 
PM testing/adjusting to improve resolution

SVG Coaters- Note: SPR 3617 photoresist moved from Track 1(front) to 
Track 2(back). Associated recipes
                                     created in Recipe Manager and tested.

                                     SPR 220-3 photoresist moved from 
Track 2(back) to Track 1(front). Basic recipe created in Recipe
                                                          Manager, with 
all needed variations to be created after computer repairs are completed.

    Please check back in Coral for latest tool updates and current 
equipment status.

      Thanks...  The Litho Team



*/Photolithography Area Status/*

	

	

*/Wednesday, January 05, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*DOWN*

	

Annual PM in Progress

	

1

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

Scheduled PM today

	

Karl Suss 2

	

*PROBLEM*

	

Post PM testing

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*DOWN*

	

Will not boot up

	

4

Headway

	

*UP*

	

	

Laurel

	

*DOWN*

	

Tool out for PM

	

3

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Down*

	

Computer problem

	

2

3617 Process

	

*Down*

	

	

220-7 Process

	

*Down*

	

Optimizing process

	

SVGCoat2

	

3612 Process

	

*Up*

	

Intermittant transfer problem

	

955-0.7 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

Controller replaced during shutdown

	

Blue M 150 C

	

*UP*

	

Controller replaced during shutdown

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110105/8dd19e41/attachment.html>

From gsosa at stanford.edu  Thu Jan  6 08:01:48 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Thu, 06 Jan 2011 08:01:48 -0800
Subject: Litho morning status report 1/6
Message-ID: <4D25E76C.3060602@stanford.edu>

Good Morning All.....

  Here is the morning Litho Status report

ASML Stepper-  Applications group to calibrate XPA marks

SVG Coat 1- Recipe Manager PC being repaired by IT group

SVG Coat 2- 3612 1.6 micron poor spin. Will check out on morning rounds.

   Please check back in Coral for latest tool updates and current 
equipment status.

      Thanks...  The Litho Team


*/Photolithography Area Status/*

	

	

*/Thursday, January 06, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario- Out today

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*PROBLEM*

	

XPA mark calibration

	

3

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*PROBLEM*

	

Needs process testing

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Down*

	

Computer problem

	

1

220-3 Process

	

*Down*

	

	

220-7 Process

	

*Down*

	

Optimizing process

	

SVGCoat2

	

3612 Process

	

*Problem*

	

Poor Spin

	

2

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110106/66b699c6/attachment.html>

From gsosa at stanford.edu  Fri Jan  7 08:04:58 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Fri, 07 Jan 2011 08:04:58 -0800
Subject: Litho morning status report 1/7
Message-ID: <4D2739AA.9050701@stanford.edu>

Good morning All.....

   Here is the morning Litho status report

SVG Coat 1- Computer problem. IT to return the repaired PC today. Will 
re-install PC and qualify the track

    Please check back in Coral for latest tool updates and current 
equipment status.

       Thanks... The Litho Team

*/Photolithography Area Status/*

	

	

*/Friday, January 07, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*PROBLEM*

	

Needs process testing

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Down*

	

Computer problem

	

1

220-3 Process

	

*Down*

	

	

220-7 Process

	

*Down*

	

Optimizing process

	

SVGCoat2

	

3612 Process

	

*Problem*

	

Intermittent transfer problem

	

2

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110107/6f94f88a/attachment.html>

From gsosa at stanford.edu  Mon Jan 10 07:29:56 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Mon, 10 Jan 2011 07:29:56 -0800
Subject: Morning Litho status  report 1/10
Message-ID: <4D2B25F4.7010008@stanford.edu>

    Good morning All.

   Here is the morning Litho status report

SVG Coat 1- Need to do additional setup testing of process

SVG Dev- Send indexer problem. Will check out on lab rounds.

     Please check back in Coral for latest tool updates and  current 
equipment status.

       Thanks.....  The Litho Team


*/Photolithography Area Status/*

	

	

*/Monday, January 10, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*PROBLEM*

	

Needs process testing

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Down*

	

Track setup and testing

	

1

220-3 Process

	

*Down*

	

	

220-7 Process

	

*Down*

	

Optimizing process

	

SVGCoat2

	

3612 Process

	

*Problem*

	

Intermittent transfer problem

	

3

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*PROBLEM*

	

Sender problem

	

2

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

5

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

4

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110110/1868a046/attachment.html>

From gsosa at stanford.edu  Tue Jan 11 07:17:53 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Tue, 11 Jan 2011 07:17:53 -0800
Subject: Litho morning status report 1/11
Message-ID: <4D2C74A1.3050109@stanford.edu>

Good morning All.

   Here is the morning Litho status report

SVG DEV- Wafer transfer problem. Need to troubleshoot.

SVG Dev 2- User reports wafers not transferring. Will investigate during 
morning rounds

SVG Coat- Need further testing of 220-3 and 220-7 resists

SVG Coat 2- Speed boat defect in 3612 resist. Still working on it

Laurel- Poor spin.Need to troubleshoot.

    Please check back in Coral for latest tool updates and current 
equipment status.

       Thanks.... The Litho Team


*/Photolithography Area Status/*

	

	

*/Tuesday, January 11, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*PROBLEM*

	

Needs process testing

	

Headway

	

*UP*

	

	

Laurel

	

*PROBLEM*

	

Poor spin

	

6

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Down*

	

Process testing

	

3

220-7 Process

	

*Down*

	

Process testing

	

4

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

5

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*DOWN*

	

Sender problem

	

2

SVGDEV2

	

*DOWN*

	

Transfer problem

	

1

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110111/5b026a58/attachment.html>

From gsosa at stanford.edu  Wed Jan 12 07:24:30 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Wed, 12 Jan 2011 07:24:30 -0800
Subject: Morning Litho status report 1/12
Message-ID: <4D2DC7AE.4020800@stanford.edu>

Good morning All...

    Here is the Litho morning status report.

   SVG Coat- 220-3 and 220-7 resist processes down while we test and 
qualify process

   SVG Coat 2- Intermittent poor spin on 3612 resit program

   Laurel- Poor spin. Still need to investigate

     Please check back in Coral for latest tool updates and current 
equipment status.

       Thanks....  The Litho Team


*/Photolithography Area Status/*

	

	

*/Wednesday, January 12, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*PROBLEM*

	

Needs process testing

	

Headway

	

*UP*

	

	

Laurel

	

*PROBLEM*

	

Poor spin

	

4

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Down*

	

Process testing

	

2

220-7 Process

	

*Down*

	

Process testing

	

1

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

3

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

6

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

5

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110112/0d9ffd10/attachment.html>

From gsosa at stanford.edu  Thu Jan 13 07:32:49 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Thu, 13 Jan 2011 07:32:49 -0800
Subject: Morning Litho status report 1/13
Message-ID: <4D2F1B21.1070607@stanford.edu>

Good morning All......

    Here is the morning Litho status report

SVG Coat 1- 220-3 3.0 micron resist process released. still working on 
220-3 4.0 micron and 220-7 process

Laurel Spinner- Poor spin. Checking the exhaust and running tests

   Please check back in Coral for latest tool updates and current 
equipment status.

       Thanks...  The Litho Team


*/Photolithography Area Status/*

	

	

*/Thursday, January 13, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*PROBLEM*

	

Poor spin

	

4

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Problem*

	

Process testing

	

2

220-7 Process

	

*Down*

	

Process testing

	

1

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

3

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

6

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

5

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110113/3ebf535c/attachment.html>

From gsosa at stanford.edu  Fri Jan 14 07:30:14 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Fri, 14 Jan 2011 07:30:14 -0800
Subject: Litho morning status report 1/14
Message-ID: <4D306C06.3030505@stanford.edu>

Good morning All....

    Here is the morning Litho status report.

SVG Coat 1- 220-3 3 and 4 micron process released.
                        220-7 7.0 micron released for non-critical work 
or for coverage/protection
                        220-7 10 and 15 micron still needs work. Can be 
used for coverage. Test before committing your wafers

SVG Coat 2- 3612 process, intermittent defect(speed boat) . Still 
working on it but can be used with caution.

     Please check back in Coral for latest tool updates and current 
equipment status.

      Thanks.....    The Litho Team


*/Photolithography Area Status/*

	

	

*/Friday, January 14, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

1

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

2

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110114/b90c6194/attachment.html>

From gsosa at stanford.edu  Tue Jan 18 07:37:37 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Tue, 18 Jan 2011 07:37:37 -0800
Subject: Litho morning status report 1/18
Message-ID: <4D35B3C1.9020503@stanford.edu>

Good morning All...

   Here is the morning Litho status report

SVG Coat 1- User reports that carriage on HPO does not open sometimes, 
Will inspect on morning rounds.

    Please check back in Coral for latest tool updates and current tool 
status.


      Thanks.....  The Litho Team


*/Photolithography Area Status/*

	

	

*/Tuesday, January 18, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Problem*

	

HPO Carriage problem

	

1

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

2

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

3

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

5

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

4

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

6

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110118/1133c948/attachment.html>

From gsosa at stanford.edu  Wed Jan 19 07:20:46 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Wed, 19 Jan 2011 07:20:46 -0800
Subject: Morning Litho status report 1/19
Message-ID: <4D37014E.3080909@stanford.edu>

Good morning All.....

  Here is the morning Litho status report.

SVG Coat 1- EBR Alarm. Will investigate on morning rounds

SVG Coat 2- Continue to work on 3612 poor spin problem

    Please check back in Coral for latest tool updates and current 
equipment status.

        Thanks.... The Litho Team


*/Photolithography Area Status/*

	

	

*/Wednesday, January 19, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31


*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Problem*

	

EBR Problem

	

1

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

3

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

2

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

5

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

4

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

6

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110119/c5358a44/attachment.html>

From gsosa at stanford.edu  Thu Jan 20 07:48:39 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Thu, 20 Jan 2011 07:48:39 -0800
Subject: Litho morning status report 1/20
Message-ID: <4D385957.9080306@stanford.edu>

Good morning All...

    Here is the morning Litho status report.

SVG Coat 1- Continuing work on 220-7 process

SVG Coat 2- Working on intermittent defect in 3612 process

   Please check back in Coral for latest tool updates and current 
equipment status.


     Thanks....The Litho Team


*/Photolithography Area Status/*

	

	

*/Thursday, January 20, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

1

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

2

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110120/36a35035/attachment.html>

From gsosa at stanford.edu  Fri Jan 21 07:30:31 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Fri, 21 Jan 2011 07:30:31 -0800
Subject: Morning Litho status report 1/21
Message-ID: <4D39A697.1060200@stanford.edu>

Good morning All......

    Here is the morning Litho status report

SVG Coat 2- Continuing to work on intermittent defect/poor spin in 3612 
process

SVG Coat 1- Continued work on 220-7 process

   Please check back in Coral for latest tool updates and current 
equipment status.

         Thanks..... The Litho Team


*/Photolithography Area Status/*

	

	

*/Friday, January 21, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

1

SVGCoat2

	

3612 Process

	

*Problem*

	

Speed boat defect in resist

	

2

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110121/f43622d5/attachment.html>

From gsosa at stanford.edu  Mon Jan 24 07:16:00 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Mon, 24 Jan 2011 07:16:00 -0800
Subject: Morning Litho status report 1/24
Message-ID: <4D3D97B0.2040903@stanford.edu>

Good morning All....

   Here is the morning Litho status report.

   Headway Spinner- Blowing fuses. Will check and repair on morning rounds

   Water leak somewhere in FW-15. Will investigate and repair.

        Please check back in Coral for latest tool updates and current 
equipment status.


         Thanks.....   The Litho Team

*/Photolithography Area Status/*

	

	

*/Monday, January 24, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*DOWN*

	

Blowing fuses

	

1

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

2

SVGCoat2

	

3612 Process

	

*Up*

	

	

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

	

	

	

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110124/6bd06a2e/attachment.html>

From gsosa at stanford.edu  Tue Jan 25 07:15:14 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Tue, 25 Jan 2011 07:15:14 -0800
Subject: Morning Litho status report 1/25
Message-ID: <4D3EE902.2030006@stanford.edu>

Good morning All...

   Here is the morning Litho status report

   Mask Cleaner- Need to restore water supply and check for leaks. Also 
need to hook up exhaust and test.

    Please check back in Coral for latest tool updates and current 
equipment status.

        Thanks..... The Litho Team

*/Photolithography Area Status/*

	

	

*/Tuesday, January 25, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

EE410 Class in Litho today

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

2

SVGCoat2

	

3612 Process

	

*Up*

	

	

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

Mask Cleaner

	

*DOWN*

	

Water leak

	

1

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110125/3b3fb3e0/attachment.html>

From gsosa at stanford.edu  Wed Jan 26 07:27:32 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Wed, 26 Jan 2011 07:27:32 -0800
Subject: Morning Litho status report 1/26
Message-ID: <4D403D64.9060108@stanford.edu>

Good morning All....

    Here is the morning Litho status report.

  Mask Cleaner- Still down. Isolated water leak to braided water line 
between High pressure pump and Cleaner.
                              Need to order and replace.

    Please check back in Coral for latest tool updates and current 
equipment status.

           Thanks..... The Litho Team


*/Photolithography Area Status/*

	

	

*/Wednesday, January 26, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

EE410 Class in Litho today

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

2

SVGCoat2

	

3612 Process

	

*Up*

	

	

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

Mask Cleaner

	

*DOWN*

	

Water leak

	

1

	

	

	



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110126/881bee48/attachment.html>

From gsosa at stanford.edu  Thu Jan 27 07:43:26 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Thu, 27 Jan 2011 07:43:26 -0800
Subject: Morning Litho status report 1/27
Message-ID: <4D41929E.2060601@stanford.edu>

Good morning All...

   Here is the morning Litho status report

Mask Cleaner- Leak in high pressure water line. Ordering new water line.

   Please check back in Coral for latest tool updates and current 
equipment status.


   Thanks..... The Litho Team

*/Photolithography Area Status/*

	

	

*/Thursday, January 27, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

EE410 Class in Litho today

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

2

SVGCoat2

	

3612 Process

	

*Up*

	

	

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

Mask Cleaner

	

*DOWN*

	

Water leak

	

1

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110127/7bfd8825/attachment.html>

From gsosa at stanford.edu  Fri Jan 28 07:23:08 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Fri, 28 Jan 2011 07:23:08 -0800
Subject: Morning Litho status report 1/28
Message-ID: <4D42DF5C.6000607@stanford.edu>

Good morning All.....

   Here is the morning Litho status report

SVG Dev 2- Residue on hotplate. will investigate on morning rounds

Mask Cleaner- Water leak from high pressure hose. Parts are on order. 
ETA for parts 2/2/11

    Please check back in Coral for latest tool updates and current 
equipment status.


       Thanks....  The Litho Team


*/Photolithography Area Status/*

	

	

*/Friday, January 28, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Mario Out- 1/10 through 1/31

*/Exposure Tools/**//*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

2

SVGCoat2

	

3612 Process

	

*Up*

	

	

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*PROBLEM*

	

Residue on hotplate

	

1

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

5

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

4

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

6

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

Mask Cleaner

	

*DOWN*

	

Water leak

	

3

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110128/1cc351d6/attachment.html>

From gsosa at stanford.edu  Mon Jan 31 07:57:18 2011
From: gsosa at stanford.edu (Gary Sosa)
Date: Mon, 31 Jan 2011 07:57:18 -0800
Subject: Morning Litho status report 1/31
Message-ID: <4D46DBDE.7020304@stanford.edu>

Good morning All.

    Here is the morning Litho status report.

No airflow in aisle L102(SVG coat/develop aisle) due to transfer fan 
problem. Due to this failure, there
will be a loss of temperature, humidity and particulate control. Repairs 
are in progress. Please consider this
as it relates to the sensitivity of your process.

    Please check back in Coral for latest tool updates and current 
equipment status.

     Thanks...  The Litho Team



*/Photolithography Area Status/*

	

	

*/Monday, January 31, 2011/*

	

	

	

	

*/General Information / Lab Activities/*

	

	

	

Temp/Humidity/Airflow problem in aisle L-102(SVG Coat/Develop aisle) due 
to transfer fan problem.

*/Exposure Tools/*

	

Status

	

Comments

	

Priority

ASML Stepper

	

*UP*

	

	

EVAlign

	

*UP*

	

	

EVAlign2

	

*UP*

	

	

EVG-Imprint

	

*UP*

	

	

Karl Suss 1

	

*UP*

	

	

Karl Suss 2

	

*UP*

	

	

*/Manual Coaters/*

	

Status

	

	

EVGSpraycoat

	

*UP*

	

	

Headway

	

*UP*

	

	

Laurel

	

*UP*

	

	

*/Coaters/*

	

Process Status

	

	

SVGCoat

	

3612 Process

	

*Up*

	

	

220-3 Process

	

*Up*

	

	

220-7 Process

	

*Problem*

	

Optimizing Process

	

1

SVGCoat2

	

3612 Process

	

*Up*

	

	

955-0.7 Process

	

*Up*

	

	

3617 Process

	

*Up*

	

	

*/Developers/*

	

Status

	

	

SVGDEV

	

*UP*

	

	

SVGDEV2

	

*UP*

	

	

*/Ovens / Hotplates/*

	

Status

	

	

BLUEM

	

*UP*

	

	

Blue M 90 C.

	

*UP*

	

	

Blue M 110 C

	

*UP*

	

	

Blue M 150 C

	

*UP*

	

	

Fusion

	

*DOWN*

	

Hotplate experiments

	

UV-Cure

	

*UP*

	

	

White-Oven

	

*UP*

	

	

YES Vapor Prime

	

*UP*

	

	

*/Hotplates- /*

	

	

	

Laurel-left

	

*UP*

	

	

Laurel- right

	

*UP*

	

	

Headway

	

*UP*

	

	

Torrey Pines- left

	

*UP*

	

	

90 Deg C

	

*UP*

	

	

115 Deg C

	

*UP*

	

	

Torrey Pines- Right

	

*UP*

	

	

*/Metrology/Inspection/*

	

Status

	

	

Alpha-Step 500

	

*UP*

	

	

Nanospec 2-Litho

	

*UP*

	

	

Nanospec 1-Etch

	

*UP*

	

	

P2 Profiler

	

*PROBLEM*

	

-11 stage error

	

4

*/Microscpoes-/*

	

	

	

#1 Leica/Analytical

	

*UP*

	

	

#2 Ergolux/Drytek2

	

*UP*

	

	

#3 Olympus/Litho

	

*UP*

	

	

#4 Nikon Optiphot/Litho

	

*UP*

	

	

#5 Nikon/Litho

	

*UP*

	

	

#6 Leitz/Bosch

	

*UP*

	

	

#7 Leitz/Diffusion

	

*UP*

	

	

#8 Olympus/Litho

	

*UP*

	

	

#9 Olympus/Litho

	

*UP*

	

	

*/Miscellaneous/*

	

Status

	

	

EVBond

	

*PROBLEM*

	

Left flag did not pull

	

3

KSBonder

	

*PROBLEM*

	

Leaking nitrogen hose

	

5

KSCoat

	

*UP*

	

	

Litho SRD

	

*UP*

	

	

Mask Cleaner

	

*DOWN*

	

Water leak, Waiting for parts

	

2

	

	

	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/litho/attachments/20110131/bc733ebc/attachment.html>