From megrubbs at snf.stanford.edu  Mon Feb 14 10:40:01 2011
From: megrubbs at snf.stanford.edu (megrubbs at snf.stanford.edu)
Date: Mon, 14 Feb 2011 10:40:01 -0800
Subject: Problem matrix SNF 2011-02-14 10:40:01: "wafer not detected in chamber" error
Message-ID: <mailman.756.1357938501.25810.matrix-pcs@snf.stanford.edu>

this happened during the unloading process



From eenriquez at snf.stanford.edu  Mon Feb 14 11:24:30 2011
From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu)
Date: Mon, 14 Feb 2011 11:24:30 -0800
Subject: Problem matrix SNF 2011-02-14 10:40:01: "wafer not detected in chamber" error
Message-ID: <mailman.757.1357938501.25810.matrix-pcs@snf.stanford.edu>

Sample fell off the holder.  Recovered the sample and holder.  



From ylyang at snf.stanford.edu  Wed Feb 23 00:48:57 2011
From: ylyang at snf.stanford.edu (ylyang at snf.stanford.edu)
Date: Wed, 23 Feb 2011 00:48:57 -0800
Subject: Problem matrix SNF 2011-02-23 00:48:57: do not lead the wafer
Message-ID: <mailman.758.1357938501.25810.matrix-pcs@snf.stanford.edu>

When I run the wafers, it does not load the wafer. There is nothing on the screen



From mihirt at snf.stanford.edu  Wed Feb 23 01:58:09 2011
From: mihirt at snf.stanford.edu (mihirt at snf.stanford.edu)
Date: Wed, 23 Feb 2011 01:58:09 -0800
Subject: Problem matrix SNF 2011-02-23 01:58:08: Display not responding
Message-ID: <mailman.759.1357938501.25810.matrix-pcs@snf.stanford.edu>

Display just shows flickering dots. I used it earlier and it was fine. 



From maurice at snf.stanford.edu  Wed Feb 23 09:07:58 2011
From: maurice at snf.stanford.edu (maurice at snf.stanford.edu)
Date: Wed, 23 Feb 2011 09:07:58 -0800
Subject: Shutdown matrix SNF 2011-02-23 09:07:57: no display
Message-ID: <mailman.760.1357938501.25810.matrix-pcs@snf.stanford.edu>

Scott Lee reports that the screen is blank.



From mdickey at snf.stanford.edu  Wed Feb 23 09:16:36 2011
From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu)
Date: Wed, 23 Feb 2011 09:16:36 -0800
Subject: Problem matrix SNF 2011-02-23 09:16:36: test
Message-ID: <mailman.761.1357938501.25810.matrix-pcs@snf.stanford.edu>

needs testing



From mdickey at snf.stanford.edu  Wed Feb 23 09:16:55 2011
From: mdickey at snf.stanford.edu (mdickey at snf.stanford.edu)
Date: Wed, 23 Feb 2011 09:16:55 -0800
Subject: Shutdown matrix SNF 2011-02-23 09:07:57: no display
Message-ID: <mailman.762.1357938501.25810.matrix-pcs@snf.stanford.edu>

display is back after reset



From latta at snf.stanford.edu  Wed Feb 23 14:30:40 2011
From: latta at snf.stanford.edu (latta at snf.stanford.edu)
Date: Wed, 23 Feb 2011 14:30:40 -0800
Subject: Problem matrix SNF 2011-02-23 00:48:57: do not lead the wafer
Message-ID: <mailman.763.1357938501.25810.matrix-pcs@snf.stanford.edu>

Mike fixed it- display is working.



From latta at snf.stanford.edu  Wed Feb 23 14:31:01 2011
From: latta at snf.stanford.edu (latta at snf.stanford.edu)
Date: Wed, 23 Feb 2011 14:31:01 -0800
Subject: Problem matrix SNF 2011-02-23 01:58:08: Display not responding
Message-ID: <mailman.764.1357938501.25810.matrix-pcs@snf.stanford.edu>

display back in service



From latta at snf.stanford.edu  Wed Feb 23 14:31:36 2011
From: latta at snf.stanford.edu (latta at snf.stanford.edu)
Date: Wed, 23 Feb 2011 14:31:36 -0800
Subject: Problem matrix SNF 2011-02-23 09:16:36: test
Message-ID: <mailman.765.1357938501.25810.matrix-pcs@snf.stanford.edu>

ran 3 wafers with good result.