From jperez at snf.stanford.edu Wed Dec 5 01:40:35 2001 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Dec 5, 2001 1:40:35 PM Subject: Problem metalica 2001-12-05 13:40:34: Cryopump needs Regen. Message-ID: Temperture 18 degress when I started pumping down the system. After two hours it wouldn't pumpdown to a base pressure to operate per specification. From ericp at snf.stanford.edu Fri Dec 7 01:18:20 2001 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Dec 7, 2001 1:18:20 AM Subject: Problem metalica 2001-12-07 01:18:19: Cryo regen complete Message-ID: Cryo regen should be complete by 06:00 friday morning Check cryo temp, and then proceed. From jhaydon at snf.stanford.edu Fri Dec 7 03:31:05 2001 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Dec 7, 2001 3:31:05 PM Subject: Problem metalica 2001-12-07 01:18:19: Cryo regen complete Message-ID: Cryo regen completed From jhaydon at snf.stanford.edu Fri Dec 7 03:31:19 2001 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Dec 7, 2001 3:31:19 PM Subject: Problem metalica 2001-12-05 13:40:34: Cryopump needs Regen. Message-ID: cryo regen completed From jperez at snf.stanford.edu Wed Dec 12 09:34:54 2001 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Dec 12, 2001 9:34:54 AM Subject: Shutdown metalica 2001-12-12 09:34:53: System won't vent Message-ID: From jhaydon at snf.stanford.edu Wed Dec 12 11:27:56 2001 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Dec 12, 2001 11:27:56 AM Subject: Shutdown metalica 2001-12-12 09:34:53: System won't vent Message-ID: meter switch in the off position this disables the hoist From ericp at snf.stanford.edu Thu Dec 20 06:20:24 2001 From: ericp at snf.stanford.edu (ericp at snf.stanford.edu) Date: Dec 20, 2001 6:20:24 PM Subject: Shutdown metalica 2001-12-20 18:20:24: Cryo out for rebuild Message-ID: The Cryo system is being sent out for rebuild over the shutdown. Parts should be back in early January 2002, and then we should need one day to reinstall and restart the machine.