From jperez at snf.stanford.edu  Tue Jan  9 15:06:28 2007
From: jperez at snf.stanford.edu (jperez at snf.stanford.edu)
Date: Tue, 9 Jan 2007 15:06:28 -0800
Subject: Problem metalica SNF 2007-01-09 15:06:27: T/C monitor on the front panel 
Message-ID: <mailman.737.1357938526.25834.metalica-pcs@snf.stanford.edu>

(vacuum gauge) sitting at approximently 200 mT.



From jperez at snf.stanford.edu  Thu Jan 11 11:15:03 2007
From: jperez at snf.stanford.edu (jperez at snf.stanford.edu)
Date: Thu, 11 Jan 2007 11:15:03 -0800
Subject: Problem metalica SNF 2007-01-09 15:06:27: T/C monitor on the front panel 
Message-ID: <mailman.738.1357938526.25834.metalica-pcs@snf.stanford.edu>

First pumpdown the T/C monitor reached 150 mT today. 
Taking a little longer to reach. Watch monitor after closing 
roughing pump that pressure doesn't rise. Range 150 +/- 40.



From huangzb at snf.stanford.edu  Thu Jan 25 10:13:39 2007
From: huangzb at snf.stanford.edu (huangzb at snf.stanford.edu)
Date: Thu, 25 Jan 2007 10:13:39 -0800
Subject: Problem metalica SNF 2007-01-25 10:13:38: cyro pump nob looses
Message-ID: <mailman.739.1357938526.25834.metalica-pcs@snf.stanford.edu>

Cyro pump nob become loose itself even snuggly tightened sometimes.



From jperez at snf.stanford.edu  Fri Jan 26 07:19:31 2007
From: jperez at snf.stanford.edu (jperez at snf.stanford.edu)
Date: Fri, 26 Jan 2007 07:19:31 -0800
Subject: Problem metalica SNF 2007-01-25 10:13:38: cyro pump nob looses
Message-ID: <mailman.740.1357938526.25834.metalica-pcs@snf.stanford.edu>

The Gate valve is closed when switching everything off at the 
end of deposition. When you vent the system, pressure in 
 the gate valve also releases and at this time you can 
actually turn the gate valve a quarter turn. The gate valve is 
still closed without that additional quarter turn at the end. It's
OK.



From jperez at snf.stanford.edu  Tue Jan 30 11:19:45 2007
From: jperez at snf.stanford.edu (jperez at snf.stanford.edu)
Date: Tue, 30 Jan 2007 11:19:45 -0800
Subject: Shutdown metalica SNF 2007-01-30 11:19:44: Hoist Not Lifting Bell Jar
Message-ID: <mailman.741.1357938526.25834.metalica-pcs@snf.stanford.edu>




From cbaxter at snf.stanford.edu  Wed Jan 31 14:14:14 2007
From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu)
Date: Wed, 31 Jan 2007 14:14:14 -0800
Subject: Shutdown metalica SNF 2007-01-30 11:19:44: Hoist Not Lifting Bell Jar
Message-ID: <mailman.742.1357938526.25834.metalica-pcs@snf.stanford.edu>

Rebuilded lifter hoist ( thanks to AL) and installed.