From faridz at snf.stanford.edu Mon Oct 10 17:34:17 2011 From: faridz at snf.stanford.edu (faridz at snf.stanford.edu) Date: Mon, 10 Oct 2011 17:34:17 -0700 Subject: Problem metalica SNF 2011-10-10 17:34:17: pump down taking about 1 hr 30 mins. Message-ID: From jperez at snf.stanford.edu Tue Oct 11 07:07:52 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 11 Oct 2011 07:07:52 -0700 Subject: Problem metalica SNF 2011-10-10 17:34:17: pump down taking about 1 hr 30 mins. Message-ID: One hour isn't a problem, but a comment. We'll see how everyone does today. From jasonlin at snf.stanford.edu Thu Oct 13 00:20:47 2011 From: jasonlin at snf.stanford.edu (jasonlin at snf.stanford.edu) Date: Thu, 13 Oct 2011 00:20:47 -0700 Subject: Problem metalica SNF 2011-10-13 00:20:47: silver paste low Message-ID: running low on silver paste From jperez at snf.stanford.edu Thu Oct 13 08:05:46 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Thu, 13 Oct 2011 08:05:46 -0700 Subject: Problem metalica SNF 2011-10-13 00:20:47: silver paste low Message-ID: Added Silver paste to jar. From kgc at snf.stanford.edu Thu Oct 20 17:00:58 2011 From: kgc at snf.stanford.edu (kgc at snf.stanford.edu) Date: Thu, 20 Oct 2011 17:00:58 -0700 Subject: Problem metalica SNF 2011-10-20 17:00:57: Gave valve very finicky Message-ID: Hard to get it to stabilize as well as it used to. Drifted a lot over time. From scrippen at snf.stanford.edu Sat Oct 22 19:51:22 2011 From: scrippen at snf.stanford.edu (scrippen at snf.stanford.edu) Date: Sat, 22 Oct 2011 19:51:22 -0700 Subject: Problem metalica SNF 2011-10-22 19:51:21: base pressure difficult to reach Message-ID: could not reach base pressure 1e-6 even after waiting 2 hours. could only get to 1.3e-6. 5e-3 difficult to maintain with gate valve during deposition steps. From kosarb at snf.stanford.edu Mon Oct 24 17:39:37 2011 From: kosarb at snf.stanford.edu (kosarb at snf.stanford.edu) Date: Mon, 24 Oct 2011 17:39:37 -0700 Subject: Comment metalica SNF 2011-10-24 17:39:37: cryo tempreture is 100, and it didn't pumped down Message-ID: From alsune at snf.stanford.edu Mon Oct 24 18:27:37 2011 From: alsune at snf.stanford.edu (alsune at snf.stanford.edu) Date: Mon, 24 Oct 2011 18:27:37 -0700 Subject: Problem metalica SNF 2011-10-24 18:27:36: Cryo Temperature rising Message-ID: When arrived at the equipment found the cryo temp to be around 178K. Discontinued use because of this. From jperez at snf.stanford.edu Tue Oct 25 07:19:57 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 25 Oct 2011 07:19:57 -0700 Subject: Shutdown metalica SNF 2011-10-25 07:19:57: Regen - Cryo temp 188 Message-ID: From jperez at snf.stanford.edu Tue Oct 25 11:21:34 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 25 Oct 2011 11:21:34 -0700 Subject: Shutdown metalica SNF 2011-10-25 07:19:57: Regen - Cryo temp 188 Message-ID: Regen Completed From jperez at snf.stanford.edu Tue Oct 25 11:21:46 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 25 Oct 2011 11:21:46 -0700 Subject: Problem metalica SNF 2011-10-24 18:27:36: Cryo Temperature rising Message-ID: regen completed From jperez at snf.stanford.edu Tue Oct 25 11:22:06 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Tue, 25 Oct 2011 11:22:06 -0700 Subject: Comment metalica SNF 2011-10-24 17:39:37: cryo tempreture is 100, and it didn't pumped down Message-ID: Regen completed From jhaydon at snf.stanford.edu Mon Oct 31 09:25:47 2011 From: jhaydon at snf.stanford.edu (jhaydon at snf.stanford.edu) Date: Mon, 31 Oct 2011 09:25:47 -0700 Subject: Problem metalica SNF 2011-10-22 19:51:21: base pressure difficult to reach Message-ID: no new pressure control problems recorded From jperez at snf.stanford.edu Mon Oct 31 13:22:30 2011 From: jperez at snf.stanford.edu (jperez at snf.stanford.edu) Date: Mon, 31 Oct 2011 13:22:30 -0700 Subject: Problem metalica SNF 2011-10-20 17:00:57: Gave valve very finicky Message-ID: I ran the system and notices that the gate valve position can change from one place to another. Take it slow.