From gloria.wong at stanford.edu  Mon Apr 10 13:41:58 2006
From: gloria.wong at stanford.edu (Gloria Wong)
Date: Mon, 10 Apr 2006 13:41:58 -0700
Subject: Metalica free Wed., April 12, 6:30pm onwards
Message-ID: <007c01c65cdf$36d096e0$c13342ab@Laptopsally>

Metalica is free Wednesday, April 12, 6:30pm onwards.  Reservation removed due to scheduling conflict.

Gloria
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/metalica/attachments/20060410/e685f6a5/attachment.html>

From ndhuang at stanford.edu  Mon Apr 10 17:23:09 2006
From: ndhuang at stanford.edu (Ningdong Huang)
Date: Mon, 10 Apr 2006 17:23:09 -0700
Subject: Metalica free tonight
Message-ID: <1144714989.443af6edd2026@webmail.stanford.edu>



Sorry about the last minute cancellation. Samples not ready.

regards,
Ningdong

-- 
Ningdong Huang, Graduate Student
Applied Physics, Stanford University
Stanford Synchrotron Radiation Laboratory
650-926-2345





From kimsangb at stanford.edu  Thu Apr 13 00:26:53 2006
From: kimsangb at stanford.edu (SangBum Kim)
Date: Thu, 13 Apr 2006 00:26:53 -0700
Subject: Au target?
Message-ID: <001a01c65ecb$a3638c20$a9b50c80@anavel>

Dear Metalica users,

 

 I looked for Au target today and couldn't find any. Should I buy one for
myself or is it not allowed any more in Metalica?

 

Thanks,

SangBum

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/metalica/attachments/20060413/b43bc806/attachment.html>

From cm_richter at att.net  Thu Apr 13 22:14:48 2006
From: cm_richter at att.net (C. Richter)
Date: Thu, 13 Apr 2006 22:14:48 -0700
Subject: Metalica: Cancelled Reservation Friday 5-8pm
Message-ID: <443F2FC8.9020007@att.net>

I will not be able to make to the Metalica on time to use this reservation.

Claudia




From jperez at snf.stanford.edu  Fri Apr 21 15:28:19 2006
From: jperez at snf.stanford.edu (Jeannie Perez)
Date: Fri, 21 Apr 2006 15:28:19 -0700
Subject: Cable for B source gun having a problem
Message-ID: <6.2.5.6.2.20060421151529.042b69f0@snf.stanford.edu>

Hi Metalica Users,
It seems that source gun B  cable can be switched with source gun A's 
cable if doing dual layers. Here is what I recommend;
Set up both guns (A & B) with targets, if plasma doesn't strike using 
source gun B turn off power supply.
Switch toggle switch back up to test mode.
Disconnect cable from source gun B
Disconnect cable from source gun A
Connect cable from source gun A to gun B and you should strike plasma 
once you've turned everything back on (power supply, and toggle back 
down to HV mode.
Sorry for the inconvenience Jim Haydon will look for the problem on Monday.
If too confusing, please wait until the problem has been corrected.
Regards,


Jeannie Perez
Science and Engineering Technician
Stanford Nanofabrication Facility
Stanford University
Tel: (650) 723-7997
Fax: (650) 725-6278

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://snf.stanford.edu/pipermail/metalica/attachments/20060421/91fb0e6f/attachment.html>

From lscjblue at yahoo.com  Fri Apr 28 23:07:29 2006
From: lscjblue at yahoo.com (Ping Zhang)
Date: Fri, 28 Apr 2006 23:07:29 -0700 (PDT)
Subject: Reservation cancel from 9am to 2pm tomorrow
Message-ID: <20060429060729.20619.qmail@web38103.mail.mud.yahoo.com>

Enjoy.

Ping Zhang