Problem micromanipulator6000 SNF 2011-09-29 22:47:44: lower than minimum height

shott at shott at
Thu Oct 6 12:12:40 PDT 2011

Note: the new set of probes are standard height, rather than the low-profile option.  These probes have an additional 1cm thick spacer that keeps the probes way above the chuck unless the platen is lowered a LONG ways down.
After contacting Micromanipulator on the issue, I've removed the additional spacers.  This makes the new probes mechically identical to the new old ones and allows proper probing with the platen in the optimum height range.

More information about the micromanipulator6000-pcs mailing list