From emyers at snf.stanford.edu  Mon May 14 08:18:22 2012
From: emyers at snf.stanford.edu (emyers at snf.stanford.edu)
Date: Mon, 14 May 2012 08:18:22 -0700
Subject: Shutdown micromanipulator6000 SNF 2012-05-14 08:18:21: Moving to nSil
Message-ID: <mailman.39.1356282564.4267.micromanipulator6000-pcs@snf.stanford.edu>

System is shut down for it's move to the nSil room.



From emyers at snf.stanford.edu  Mon May 14 15:30:13 2012
From: emyers at snf.stanford.edu (emyers at snf.stanford.edu)
Date: Mon, 14 May 2012 15:30:13 -0700
Subject: Shutdown micromanipulator6000 SNF 2012-05-14 08:18:21: Moving to nSil
Message-ID: <mailman.40.1356282564.4267.micromanipulator6000-pcs@snf.stanford.edu>

Completed move to the nSil lab.



From emyers at snf.stanford.edu  Mon May 14 15:31:04 2012
From: emyers at snf.stanford.edu (emyers at snf.stanford.edu)
Date: Mon, 14 May 2012 15:31:04 -0700
Subject: Comment micromanipulator6000 SNF 2012-05-14 15:31:03: Check Cableing
Message-ID: <mailman.41.1356282564.4267.micromanipulator6000-pcs@snf.stanford.edu>

Make sure you test the cableing in the system.  



From shott at snf.stanford.edu  Tue May 22 16:37:35 2012
From: shott at snf.stanford.edu (shott at snf.stanford.edu)
Date: Tue, 22 May 2012 16:37:35 -0700
Subject: Problem micromanipulator6000 SNF 2011-12-14 17:17:01: lever won't stay up
Message-ID: <mailman.42.1356282564.4267.micromanipulator6000-pcs@snf.stanford.edu>

Adjusted the "up position" detent so that the stage now stays up when loading a wafer.
John



From shott at snf.stanford.edu  Tue May 22 16:38:25 2012
From: shott at snf.stanford.edu (shott at snf.stanford.edu)
Date: Tue, 22 May 2012 16:38:25 -0700
Subject: Problem micromanipulator6000 SNF 2012-03-24 01:52:36: PC -LCR connection problem
Message-ID: <mailman.43.1356282564.4267.micromanipulator6000-pcs@snf.stanford.edu>

I believe that Kokab found that this was rectified by doing a short/open calibration.
John



From shott at snf.stanford.edu  Tue May 22 16:40:52 2012
From: shott at snf.stanford.edu (shott at snf.stanford.edu)
Date: Tue, 22 May 2012 16:40:52 -0700
Subject: Comment micromanipulator6000 SNF 2012-05-22 16:40:51: New probe tips ....
Message-ID: <mailman.44.1356282564.4267.micromanipulator6000-pcs@snf.stanford.edu>

In honor of the start of EE410, I've put in four new probe tips, adjusted everything to mid-range, and made sure that the up/down motion of the stage does not drive the probes into the microscope body.  I haven't had time to determine if one or more of the traix cables has developed a short ...
John