From chienyuc at stanford.edu  Mon Mar 11 08:40:23 2013
From: chienyuc at stanford.edu (chienyuc at stanford.edu)
Date: Mon, 11 Mar 2013 08:40:23 -0700 (PDT)
Subject: [micromanipulator6000-pcs] Problem micromanipulator6000 SNF
	2013-03-11 08:40:22: SMU4 failed
Message-ID: <6143106.25.1363016423021.JavaMail.coral@snc-coraldb.stanford.edu>

SMU4 failed in self-test and calibration stage.  Tried close and restart the program but the same.  This also occured intermittenly in previous days.

From shott at stanford.edu  Tue Mar 12 12:46:36 2013
From: shott at stanford.edu (shott at stanford.edu)
Date: Tue, 12 Mar 2013 12:46:36 -0700 (PDT)
Subject: [micromanipulator6000-pcs] Problem micromanipulator6000 SNF
 2013-03-11 08:40:22: SMU4 failed
Message-ID: <7475352.32.1363117596155.JavaMail.coral@snc-coraldb.stanford.edu>

Yesterday, EasyExpert wouldn't even start.  I don't know if anyone did anything explicit to fix that.
However, I just went in and found that EasyExpert would start.  I was then able to go in and make sure that all SMUs will now pass calibration.
The B1500A should be good to go ...
John

From shott at stanford.edu  Tue Mar 12 12:47:16 2013
From: shott at stanford.edu (shott at stanford.edu)
Date: Tue, 12 Mar 2013 12:47:16 -0700 (PDT)
Subject: [micromanipulator6000-pcs] Problem micromanipulator6000 SNF
 2013-03-03 19:25:54: +-42V range error message
Message-ID: <28336930.33.1363117636246.JavaMail.coral@snc-coraldb.stanford.edu>

The "door" to the probe station needs to be down to get voltages higher than 42V.
John

From shott at stanford.edu  Tue Mar 12 12:47:58 2013
From: shott at stanford.edu (shott at stanford.edu)
Date: Tue, 12 Mar 2013 12:47:58 -0700 (PDT)
Subject: [micromanipulator6000-pcs] Problem micromanipulator6000 SNF
 2013-02-26 11:37:41: Probe Tip Condition
Message-ID: <5878710.34.1363117678341.JavaMail.coral@snc-coraldb.stanford.edu>

New probes installed a few days ago ... just before the EE410 rush.
John