From cbaxter at snf.stanford.edu Sun May 2 11:49:38 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Sun, 2 May 2010 11:49:38 -0700 Subject: Comment mrc SNF 2010-05-02 11:49:36: Rough TC Message-ID: The TC on thr roughing line is bad, will change it on Monday 4/3.. From eenriquez at snf.stanford.edu Mon May 3 07:59:49 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 3 May 2010 07:59:49 -0700 Subject: Problem mrc SNF 2010-04-30 19:56:30: Found MRC 150 watts, no plasma Message-ID: Static build-up on the meter face. Removed the front cover and the tc functioned normally. Discharged the static with IPA. From eenriquez at snf.stanford.edu Mon May 3 07:59:55 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 3 May 2010 07:59:55 -0700 Subject: Problem mrc SNF 2010-04-30 19:57:58: Roughing TC readout broken? Message-ID: Static build-up on the meter face. Removed the front cover and the tc functioned normally. Discharged the static with IPA. From eenriquez at snf.stanford.edu Mon May 3 08:00:00 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 3 May 2010 08:00:00 -0700 Subject: Comment mrc SNF 2010-05-02 11:49:36: Rough TC Message-ID: From dalyx at snf.stanford.edu Thu May 6 16:01:59 2010 From: dalyx at snf.stanford.edu (dalyx at snf.stanford.edu) Date: Thu, 6 May 2010 16:01:59 -0700 Subject: Problem mrc SNF 2010-05-06 16:01:58: Roughing gauge not working..... Message-ID: From eenriquez at snf.stanford.edu Fri May 7 10:48:16 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Fri, 7 May 2010 10:48:16 -0700 Subject: Problem mrc SNF 2010-05-06 16:01:58: Roughing gauge not working..... Message-ID: Static build-up on the gauge face. Removed the gauge face and rinsed with IPA. From yiwu at snf.stanford.edu Mon May 10 19:27:18 2010 From: yiwu at snf.stanford.edu (yiwu at snf.stanford.edu) Date: Mon, 10 May 2010 19:27:18 -0700 Subject: Problem mrc SNF 2010-05-10 19:27:17: Rough Vacuum Gauge not functional Message-ID: During the middle of my session, the rough vaccum gauge is not functional normally and always indicates the same pressure. From eenriquez at snf.stanford.edu Thu May 13 08:16:56 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Thu, 13 May 2010 08:16:56 -0700 Subject: Comment mrc SNF 2010-05-13 08:16:55: Update roughing vac gauge Message-ID: The cause of the erroneous vacuum gauge reading is static build-up on the meter face. Ordered a can of anti-static spray to coat the meter face to help reduce the build up. From eenriquez at snf.stanford.edu Tue May 18 08:24:21 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 May 2010 08:24:21 -0700 Subject: Problem mrc SNF 2010-05-10 19:27:17: Rough Vacuum Gauge not functional Message-ID: Coated the vacuum gauge panel meter with an anti-static film. From eenriquez at snf.stanford.edu Tue May 18 08:24:29 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 18 May 2010 08:24:29 -0700 Subject: Comment mrc SNF 2010-05-13 08:16:55: Update roughing vac gauge Message-ID: Archived From eenriquez at snf.stanford.edu Tue May 25 08:50:58 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Tue, 25 May 2010 08:50:58 -0700 Subject: Shutdown mrc SNF 2010-05-25 08:50:58: Diffusion pump check Message-ID: Need to check oil level. From maurice at snf.stanford.edu Tue May 25 11:36:45 2010 From: maurice at snf.stanford.edu (maurice at snf.stanford.edu) Date: Tue, 25 May 2010 11:36:45 -0700 Subject: Shutdown mrc SNF 2010-05-25 08:50:58: Diffusion pump check Message-ID: Mike D.added oil - Kruger says it is now working From eenriquez at snf.stanford.edu Wed May 26 07:48:45 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 26 May 2010 07:48:45 -0700 Subject: Problem mrc SNF 2010-05-25 08:47:01: oil contamination Message-ID: Cleaned the chamber and added oil to diffusion pump. From eenriquez at snf.stanford.edu Wed May 26 07:49:03 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Wed, 26 May 2010 07:49:03 -0700 Subject: Problem mrc SNF 2010-05-25 08:48:40: RF panel failure Message-ID: System wasn't enabled.