From mdickey at stanford.edu Thu Sep 4 09:27:36 2008 From: mdickey at stanford.edu (Mike Dickey) Date: Thu, 04 Sep 2008 09:27:36 -0700 Subject: Chamber C clamp ring Message-ID: <48C00C78.6050409@stanford.edu> There has been a delay in the manufacturing of the clamp ring for chanber C by the vendor making it. With any luck it will be here sometime by the end of next week or the week after. From cearhart at stanford.edu Thu Sep 18 16:44:30 2008 From: cearhart at stanford.edu (Chris Earhart) Date: Thu, 18 Sep 2008 16:44:30 -0700 Subject: P5000 problem Message-ID: <131c1bff0809181644x26bd602dh43327ca5797e8f66@mail.gmail.com> Dear P5000 users, > > Upon trying to remove my wafer, I received the error "The load chamber task did not acknowledge the sequencer". The message "Select Error Processing Option" flashes on the screen on the System page, but I am unable to abort or put the system in manual mode, or open the door. My wafer is currently in the cassette in the loading station. Nancy asked me to report the problem, but not shutdown the machine in case Eric P. or another user can fix it before tomorrow. Thanks, Chris -------------- next part -------------- An HTML attachment was scrubbed... URL: From mleone at alcestech.com Tue Sep 23 12:48:34 2008 From: mleone at alcestech.com (mleone at alcestech.com) Date: Tue, 23 Sep 2008 15:48:34 -0400 Subject: 2-4pm opening Message-ID: <23174071.12111222199314319.JavaMail.servlet@perfora> Nancy and labmembers, Neither myself nor Richard Yeh will be able to use the P5000 from 2-4pm today, so this slot is available. Thanks and regards, Matthew Leone Alces Technology From wangss at stanford.edu Tue Sep 23 16:26:24 2008 From: wangss at stanford.edu (Shasha Wang) Date: Tue, 23 Sep 2008 16:26:24 -0700 Subject: P5000 free Wed 10am-12pm Message-ID: