From cbaxter at snf.stanford.edu Tue Aug 3 11:58:14 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Tue, 3 Aug 2010 11:58:14 -0700 Subject: Shutdown pquest SNF 2010-08-03 11:58:13: Not sensing arm and clamp position. Message-ID: From cbaxter at snf.stanford.edu Tue Aug 3 12:31:53 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Tue, 3 Aug 2010 12:31:53 -0700 Subject: Shutdown pquest SNF 2010-08-03 11:58:13: Not sensing arm and clamp position. Message-ID: Reseated contact relay, homed arm and set clamp to up position. From eenriquez at snf.stanford.edu Mon Aug 9 11:30:19 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 9 Aug 2010 11:30:19 -0700 Subject: Comment pquest SNF 2010-08-09 11:30:18: wet clean completed Message-ID: From eenriquez at snf.stanford.edu Mon Aug 9 11:30:37 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 9 Aug 2010 11:30:37 -0700 Subject: Comment pquest SNF 2010-07-12 12:42:19: Wet clean completed Message-ID: archived From eenriquez at snf.stanford.edu Mon Aug 16 11:31:38 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 16 Aug 2010 11:31:38 -0700 Subject: Comment pquest SNF 2010-08-16 11:31:38: Completed monthly PM Message-ID: From bryane at snf.stanford.edu Fri Aug 20 16:21:25 2010 From: bryane at snf.stanford.edu (bryane at snf.stanford.edu) Date: Fri, 20 Aug 2010 16:21:25 -0700 Subject: Comment pquest SNF 2010-08-20 16:21:25: Microwave power fluctuating Message-ID: My recipe calls for 200W of microwave power. Although the set point was 200W, it would fluctuate between 190W and 200W. Usually the power is steady at 200W. From zzp at snf.stanford.edu Sat Aug 21 11:42:43 2010 From: zzp at snf.stanford.edu (zzp at snf.stanford.edu) Date: Sat, 21 Aug 2010 11:42:43 -0700 Subject: Shutdown pquest SNF 2010-08-21 11:42:43: wafer stuck inside chamber Message-ID: waiting for clamp down sensor never ends after loading. From eenriquez at snf.stanford.edu Mon Aug 23 08:57:27 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 23 Aug 2010 08:57:27 -0700 Subject: Shutdown pquest SNF 2010-08-21 11:42:43: wafer stuck inside chamber Message-ID: Wafer recoverd and placed in the user's wafer container. Optical sensors (clamp up/down, load arm) are having an intermittent connection problem. Will continue to troubleshoot. Now performing a scheduled wet clean. From eenriquez at snf.stanford.edu Mon Aug 23 08:59:48 2010 From: eenriquez at snf.stanford.edu (eenriquez at snf.stanford.edu) Date: Mon, 23 Aug 2010 08:59:48 -0700 Subject: Problem pquest SNF 2010-08-23 08:59:47: Intermittent sensor problem Message-ID: Clamp and loader arm position sensors are intermittently losing communication. From gshambat at snf.stanford.edu Mon Aug 30 16:16:36 2010 From: gshambat at snf.stanford.edu (gshambat at snf.stanford.edu) Date: Mon, 30 Aug 2010 16:16:36 -0700 Subject: Shutdown pquest SNF 2010-08-30 16:16:36: Cannot find home position for load arm Message-ID: From cbaxter at snf.stanford.edu Tue Aug 31 10:24:18 2010 From: cbaxter at snf.stanford.edu (cbaxter at snf.stanford.edu) Date: Tue, 31 Aug 2010 10:24:18 -0700 Subject: Shutdown pquest SNF 2010-08-30 16:16:36: Cannot find home position for load arm Message-ID: Reset system and was able to home loader... From mkseo at snf.stanford.edu Tue Aug 31 14:31:13 2010 From: mkseo at snf.stanford.edu (mkseo at snf.stanford.edu) Date: Tue, 31 Aug 2010 14:31:13 -0700 Subject: Shutdown pquest SNF 2010-08-31 14:31:12: clamp sensor problem Message-ID: Clamp sensor is not working. I cannot load and unload samples.