From kaimeifu at snf.stanford.edu Thu Apr 1 19:33:52 2004 From: kaimeifu at snf.stanford.edu (kaimeifu at snf.stanford.edu) Date: Thu, 1 Apr 2004 19:33:52 -0800 Subject: Problem raith 2004-04-01 19:33:52: 7.5 aperture Message-ID: Gigi and I could not align this aperture. From kaimeifu at snf.stanford.edu Sat Apr 3 21:12:14 2004 From: kaimeifu at snf.stanford.edu (kaimeifu at snf.stanford.edu) Date: Sat, 3 Apr 2004 21:12:14 -0800 Subject: Comment raith 2004-04-03 21:12:13: 10 micron aperture gun alignment Message-ID: When I used this thursday there was no problem doing gun alignment. Today, the gun alignment was already close to 100% in x when I started and I could not quite center the aperture. From altug at snf.stanford.edu Sun Apr 4 19:27:29 2004 From: altug at snf.stanford.edu (altug at snf.stanford.edu) Date: Sun, 4 Apr 2004 19:27:29 -0700 Subject: Problem raith 2004-04-04 19:27:29: Pattern generator problem Message-ID: 1-Window pops up constantly saying: "Digital Pattern GENerator not ready" 2- Altough I turn on EHT beam is not on From hungtao at snf.stanford.edu Mon Apr 5 13:09:29 2004 From: hungtao at snf.stanford.edu (hungtao at snf.stanford.edu) Date: Mon, 5 Apr 2004 13:09:29 -0700 Subject: Problem raith 2004-04-05 13:09:28: EHT problem Message-ID: As the same problem as atlug saw e-beam is not on even though I turn on EHT 10kV shows message "Digital Pattern Generator is not ready" From jwc at snf.stanford.edu Wed Apr 7 08:53:39 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Apr 2004 08:53:39 -0700 Subject: Comment raith 2004-03-18 19:15:42: Users are requested to verify the 120 um aperture is out of cal. Message-ID: From jwc at snf.stanford.edu Wed Apr 7 08:53:57 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Apr 2004 08:53:57 -0700 Subject: Problem raith 2004-03-26 18:56:09: problem Message-ID: From jwc at snf.stanford.edu Wed Apr 7 08:54:08 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Apr 2004 08:54:08 -0700 Subject: Problem raith 2004-04-01 19:33:52: 7.5 aperture Message-ID: From jwc at snf.stanford.edu Wed Apr 7 08:54:24 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Apr 2004 08:54:24 -0700 Subject: Comment raith 2004-04-03 21:12:13: 10 micron aperture gun alignment Message-ID: From jwc at snf.stanford.edu Wed Apr 7 08:54:54 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Apr 2004 08:54:54 -0700 Subject: Problem raith 2004-04-04 19:27:29: Pattern generator problem Message-ID: From jwc at snf.stanford.edu Wed Apr 7 08:55:15 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Apr 2004 08:55:15 -0700 Subject: Problem raith 2004-04-05 13:09:28: EHT problem Message-ID: From grupp at snf.stanford.edu Thu Apr 8 11:21:16 2004 From: grupp at snf.stanford.edu (grupp at snf.stanford.edu) Date: Thu, 8 Apr 2004 11:21:16 -0700 Subject: Shutdown raith 2004-04-08 11:21:08: UNable to open Loadlock Error:5 Message-ID: From jwc at snf.stanford.edu Thu Apr 8 13:50:37 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Apr 2004 13:50:37 -0700 Subject: Shutdown raith 2004-04-08 11:21:08: UNable to open Loadlock Error:5 Message-ID: From jwc at snf.stanford.edu Thu Apr 8 13:51:01 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Apr 2004 13:51:01 -0700 Subject: Problem raith 2004-04-08 13:51:00: resetting system and repairs in progress... Message-ID: From jwc at snf.stanford.edu Thu Apr 8 14:44:01 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Apr 2004 14:44:01 -0700 Subject: Problem raith 2004-04-08 13:51:00: resetting system and repairs in progress... Message-ID: From jwc at snf.stanford.edu Thu Apr 8 14:54:35 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Apr 2004 14:54:35 -0700 Subject: Problem raith 2004-04-08 14:54:34: IEE-488 crashed -- nested problems ...TBD Message-ID: From jwc at snf.stanford.edu Thu Apr 8 16:01:26 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Apr 2004 16:01:26 -0700 Subject: Shutdown raith 2004-04-08 16:01:26: multiple nested problems after system was crashed by user Message-ID: It will take me a day to more to effect repairs. Raith field service has been contacted. JWC 1600 hrs 4-8-04 From jwc at snf.stanford.edu Fri Apr 9 13:20:08 2004 From: jwc at snf.stanford.edu (James Conway) Date: Fri, 09 Apr 2004 13:20:08 -0700 Subject: Raith down through Tuesday ... Message-ID: <40770578.9070009@snf.stanford.edu> Hello: Despite best efforts from RAITH USA and myself the RAITH 150 will be off-line and in shut down mode through Tuesday afternoon. We have identified a bad GPIB board that is interfering with proper communications to the Precision stage controller and it is causing errors and loss of functionality to the stage motor control and virtual motor control modules in the software. I spent this morning working through these interfaces and testing the IEE-488 buses and communications and as of yet have not been able to figure a way to establish a work around to this sub-system. More work on this latter this afternoon. Raith is shipping me the boards ASAP... Thank you for your support! James Conway From jwc at snf.stanford.edu Fri Apr 9 17:25:30 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 9 Apr 2004 17:25:30 -0700 Subject: Shutdown raith 2004-04-08 16:01:26: multiple nested problems after system was crashed by user Message-ID: From jwc at snf.stanford.edu Fri Apr 9 17:25:51 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 9 Apr 2004 17:25:51 -0700 Subject: Problem raith 2004-04-08 14:54:34: IEE-488 crashed -- nested problems ...TBD Message-ID: From jwc at snf.stanford.edu Fri Apr 9 17:28:46 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 9 Apr 2004 17:28:46 -0700 Subject: Problem raith 2004-04-09 17:28:45: intermittant IEE-488 comunications Message-ID: I made adjustments to the polling time and repeat status to GRIB ) stage X and Y and laser to coders. Now seems OK after 3 test of load and unload. Test write appeared OK. Yellow light mode.... If IEE error encountered use this workaround: OPen Module status panel Hghlight ICE Motor control: Press reset module Highlight Virtual Motor control: Press reset module Press OK, and continue with your unload by pressing retry or continue, NEVER CANCEL... JWC From lsmoore at snf.stanford.edu Wed Apr 21 19:55:16 2004 From: lsmoore at snf.stanford.edu (lsmoore at snf.stanford.edu) Date: Wed, 21 Apr 2004 19:55:16 -0700 Subject: Problem raith 2004-04-21 19:55:15: 30kV EHT tripped 2 more times Message-ID: raith now available. recommend use at <30kV. From edo at snf.stanford.edu Wed Apr 21 23:55:40 2004 From: edo at snf.stanford.edu (edo at snf.stanford.edu) Date: Wed, 21 Apr 2004 23:55:40 -0700 Subject: Shutdown raith 2004-04-21 23:55:40: Carrier stuck in chamber Message-ID: Raith cannot pump down load lock. From jwc at snf.stanford.edu Thu Apr 22 13:45:11 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 22 Apr 2004 13:45:11 -0700 Subject: Shutdown raith 2004-04-21 23:55:40: Carrier stuck in chamber Message-ID: From jwc at snf.stanford.edu Thu Apr 22 13:45:16 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 22 Apr 2004 13:45:16 -0700 Subject: Problem raith 2004-04-21 19:55:15: 30kV EHT tripped 2 more times Message-ID: From jwc at snf.stanford.edu Thu Apr 22 13:46:00 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 22 Apr 2004 13:46:00 -0700 Subject: Problem raith 2004-04-22 13:45:59: Please stay below 18 keV until further notice Message-ID: From dwshin at snf.stanford.edu Sat Apr 24 13:45:02 2004 From: dwshin at snf.stanford.edu (dwshin at snf.stanford.edu) Date: Sat, 24 Apr 2004 13:45:02 -0700 Subject: Problem raith 2004-04-24 13:45:02: load lock error Message-ID: The load lock cannot be pumped down Following FAQ No.1: reset the button on the controller But still having load lock error... From jwc at snf.stanford.edu Mon Apr 26 12:42:09 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Mon, 26 Apr 2004 12:42:09 -0700 Subject: Problem raith 2004-04-24 13:45:02: load lock error Message-ID: From jwc at snf.stanford.edu Mon Apr 26 15:52:08 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Mon, 26 Apr 2004 15:52:08 -0700 Subject: Problem raith 2004-04-22 13:45:59: Please stay below 18 keV until further notice Message-ID: From jwc at snf.stanford.edu Mon Apr 26 15:53:44 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Mon, 26 Apr 2004 15:53:44 -0700 Subject: Comment raith 2004-04-26 15:53:44: PLEASE STAY BELOW 18.5 keV UNTIL FURTHER NOTICE Message-ID: PLEASE STAY BELOW 18.5 KEV UNTIL FURTHER NOTICE, ARCING EVENTS HAVE BEEN OBSERVED ON HIGH ACCELERATION VOLTAGES THANK YOU, JAMES