From jwc at snf.stanford.edu Wed Jan 7 10:46:52 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 7 Jan 2004 10:46:52 -0800 Subject: Comment raith 2004-01-07 10:46:51: WED corl reservations have been deleted Message-ID: Your reservations for Today WED Jan 07. 2004 Have been deleted. Please don't expect access until tomorrow. James Conway From jwc at snf.stanford.edu Thu Jan 8 11:13:51 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Jan 2004 11:13:51 -0800 Subject: Comment raith 2003-12-19 14:11:57: Lost RAITH PC boot configuration and will need support to restore... Message-ID: From jwc at snf.stanford.edu Thu Jan 8 11:14:03 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Jan 2004 11:14:03 -0800 Subject: Shutdown raith 2003-12-19 14:12:50: Shutdown Raith for the Holidays Message-ID: From jwc at snf.stanford.edu Thu Jan 8 11:14:27 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 8 Jan 2004 11:14:27 -0800 Subject: Comment raith 2004-01-07 10:46:51: WED corl reservations have been deleted Message-ID: From quay at snf.stanford.edu Sat Jan 10 14:01:57 2004 From: quay at snf.stanford.edu (quay at snf.stanford.edu) Date: Sat, 10 Jan 2004 14:01:57 -0800 Subject: Problem raith 2004-01-10 14:01:57: Raith computer acting very funny Message-ID: Hi guys, just wanted to let you know that the Raith computer seems to be having some issues. Details in the logbook and at http://elrey.stanfor.edu:8080/Raith/25. Have fun. Charis. From jwc at snf.stanford.edu Mon Jan 12 11:00:43 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Mon, 12 Jan 2004 11:00:43 -0800 Subject: Problem raith 2004-01-10 14:01:57: Raith computer acting very funny Message-ID: Good Morning, Operator error and not following procedures correctly brought the RAITH system down with a fatal load lock errors sometime SAT. this prevented users from accessing the system later in the weekend. The users attempted to clear this error on their own and all the calibration settings for exchange and stage control were lost. I am calibrating the home, exchange, and all loader and stage x,y,z, SW limits on the system and I will be ready to work with the next user within the hour to ensure these adjustments are completed. I will also save new defaults for the 5 mm WD for 10 kV and 30 um aperture. All Users: Be sure that you have enabled the system on CORAL before attempting to LOAD or UNLOAD the pallet. Never attempt to reset the computer while a exchange navigator script is running. Users are reminded to allow the system to complete all MACROS and Navigator scripts before beginning to start operations on the system. This end of procedure status is normally announced by the question from the RAITH system requesting 'RESET XY:UV Coordinate system' and 'Turn On Electron Beam' Please Note: There is now a piezo centering routine that occurs just after the vent signal to the vent valve is sent that will cycle the piezo controls through their range of motion and end at the center of travel position. This procedure takes 1 - 3 additional minutes to complete before releasing control to the operator. This routine must be completed before starting operations. Please be a careful system operator, much time was lost to users due to this mistake over the weekend. James Conway From jwc at snf.stanford.edu Tue Jan 13 13:10:42 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 13 Jan 2004 13:10:42 -0800 Subject: Problem raith 2004-01-13 13:10:41: Report Problem for raith -- test of coral Message-ID: From jwc at snf.stanford.edu Tue Jan 13 13:11:00 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 13 Jan 2004 13:11:00 -0800 Subject: Problem raith 2004-01-13 13:10:41: Report Problem for raith -- test of coral Message-ID: From englund at snf.stanford.edu Sat Jan 24 10:44:36 2004 From: englund at snf.stanford.edu (englund at snf.stanford.edu) Date: Sat, 24 Jan 2004 10:44:36 -0800 Subject: Shutdown raith 2004-01-24 10:44:35: Report Shutdown for raith Message-ID: cannot align writefield. Seems to be a hardware problem. James is trying to get another Elphy box for monday I guess. From jwc at snf.stanford.edu Sat Jan 24 23:29:21 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sat, 24 Jan 2004 23:29:21 -0800 Subject: Shutdown raith 2004-01-24 10:44:35: Report Shutdown for raith Message-ID: From sandrews at snf.stanford.edu Tue Jan 27 15:55:44 2004 From: sandrews at snf.stanford.edu (sandrews at snf.stanford.edu) Date: Tue, 27 Jan 2004 15:55:44 -0800 Subject: Problem raith 2004-01-27 15:55:23: Raith computer is crashing constantly Message-ID: Raith worked reasonably well until I pressed "Save As" to save the position list. Message box came up saying that Raith software had done a very bad thing, and windows was going to close it. Rebooted the Raith computer and proceeded again. Each time I get anywhere close to writing I get an error: access violation, too low on memory, and now I have a out of storage space error that won't let me proceed past the "OK" button. From jwc at snf.stanford.edu Wed Jan 28 17:49:21 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 28 Jan 2004 17:49:21 -0800 Subject: Problem raith 2004-01-27 15:55:23: Raith computer is crashing constantly Message-ID: From jwc at snf.stanford.edu Wed Jan 28 17:51:03 2004 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Wed, 28 Jan 2004 17:51:03 -0800 Subject: Comment raith 2004-01-28 17:51:02: Users are requested to report all computer errors Message-ID: I have been unable to reproduce the errors that users:sandrews was encountering. Users are requested to record all errors encountered. JWC 01282004:17:50:00.00