From tkodama at snf.stanford.edu Sun Feb 7 03:39:29 2010 From: tkodama at snf.stanford.edu (tkodama at snf.stanford.edu) Date: Sun, 7 Feb 2010 03:39:29 -0800 Subject: Comment raith SNF 2010-02-07 03:39:24: piezo control error Message-ID: I encountered piezo control error when I logged in the software today. Also, SEM image could not be detected. From arkam at snf.stanford.edu Sun Feb 7 08:53:12 2010 From: arkam at snf.stanford.edu (arkam at snf.stanford.edu) Date: Sun, 7 Feb 2010 08:53:12 -0800 Subject: Problem raith SNF 2010-02-07 08:53:12: piezo controller Message-ID: obtained piezo controller not connected error. Still can write From jwc at snf.stanford.edu Mon Feb 8 13:26:26 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Mon, 8 Feb 2010 13:26:26 -0800 Subject: Comment raith SNF 2010-02-07 03:39:24: piezo control error Message-ID: just needs a hardware reset likely an ungracefull exit by previous users From jwc at snf.stanford.edu Mon Feb 8 13:26:37 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Mon, 8 Feb 2010 13:26:37 -0800 Subject: Problem raith SNF 2010-02-07 08:53:12: piezo controller Message-ID: From arkam at snf.stanford.edu Sun Feb 21 10:44:37 2010 From: arkam at snf.stanford.edu (arkam at snf.stanford.edu) Date: Sun, 21 Feb 2010 10:44:37 -0800 Subject: Problem raith SNF 2010-02-21 10:44:37: Load lock error - transfer rod wouldn't go in Message-ID: If this happens again, call James and he'll help clear the error. From arkam at snf.stanford.edu Tue Feb 23 08:27:51 2010 From: arkam at snf.stanford.edu (arkam at snf.stanford.edu) Date: Tue, 23 Feb 2010 08:27:51 -0800 Subject: Problem raith SNF 2010-02-23 08:27:51: robot arm problem Message-ID: I tried to do manualy--but Raith is stuck--not sure what to do From arkam at snf.stanford.edu Tue Feb 23 09:05:24 2010 From: arkam at snf.stanford.edu (arkam at snf.stanford.edu) Date: Tue, 23 Feb 2010 09:05:24 -0800 Subject: Shutdown raith SNF 2010-02-23 09:05:24: the machine is stuck--I cannot get my chip out... Message-ID: From jwc at snf.stanford.edu Tue Feb 23 10:03:44 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 23 Feb 2010 10:03:44 -0800 Subject: Shutdown raith SNF 2010-02-23 09:05:24: the machine is stuck--I cannot get my chip out... Message-ID: troubleshooting errant load lock t rod positioning From jwc at snf.stanford.edu Tue Feb 23 10:03:57 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 23 Feb 2010 10:03:57 -0800 Subject: Comment raith SNF 2010-01-24 14:35:08: mouse on the raith computer (left one) doesn't respond well... Message-ID: From jwc at snf.stanford.edu Tue Feb 23 10:04:07 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 23 Feb 2010 10:04:07 -0800 Subject: Problem raith SNF 2010-02-21 10:44:37: Load lock error - transfer rod wouldn't go in Message-ID: From jwc at snf.stanford.edu Tue Feb 23 10:04:34 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 23 Feb 2010 10:04:34 -0800 Subject: Problem raith SNF 2010-02-23 08:27:51: robot arm problem Message-ID: From jwc at snf.stanford.edu Tue Feb 23 10:05:00 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 23 Feb 2010 10:05:00 -0800 Subject: Problem raith SNF 2010-02-23 10:05:00: T rod positional issues -- troubleshooting Message-ID: From jwc at snf.stanford.edu Tue Feb 23 13:56:56 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Tue, 23 Feb 2010 13:56:56 -0800 Subject: Problem raith SNF 2010-02-23 10:05:00: T rod positional issues -- troubleshooting Message-ID: testing in and out 4 times -- could not identify the problem! rehomed the robot arm, and checked all the limits and settings for LL transfers and changed the inner robot arm position from 450.358 to 450.758 mm. Problem was at the outer LL robot arm position not sensing as it reached the limti switch -- but could not reproduce the errors thus far. changing back to green light status, JWC From jwc at snf.stanford.edu Thu Feb 25 12:51:50 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Thu, 25 Feb 2010 12:51:50 -0800 Subject: Problem raith SNF 2010-02-25 12:51:50: mouse interface and standard input delay issues Message-ID: I am observing very slow response tp keyboard and mouse inputs (keystrokes and mouse clicks Taking the system off line this afternoon to sweep for virus resume coral at 1800' James From jwc at snf.stanford.edu Fri Feb 26 15:27:10 2010 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Fri, 26 Feb 2010 15:27:10 -0800 Subject: Problem raith SNF 2010-02-25 12:51:50: mouse interface and standard input delay issues Message-ID: