From kcbalram at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: kcbalram at snf.stanford.edu (kcbalram at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-08-07 03:55:19: Load Lock Error Message-ID: <15663822.41.1344336920165.JavaMail.coral@shine> While loading, got an error message saying Transfer Rod outer position can not be reached Followed instructions, moved transfer rod out manually and restarted loading... worked fine this time Best, Krishna From arkam at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: arkam at snf.stanford.edu (arkam at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-08-07 09:20:42: Robot arm error Message-ID: <11314826.48.1344356443146.JavaMail.coral@shine> With the help of James loaded my sample. But now, cannot unload the chip. It seems that Raith thinks that the stage is already unloaded. From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-08-07 09:20:42: Robot arm error Message-ID: <1212426.66.1344442540499.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-08-07 03:55:19: Load Lock Error Message-ID: <32499741.67.1344442544537.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-08-03 15:06:04: t robot arm position errors were encountered Message-ID: <914454.11.1345573895576.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-07-27 14:00:09: near perfect emission levels on FE-GUN JWC Message-ID: <15583371.12.1345573899615.JavaMail.coral@shine> From zzp at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: zzp at snf.stanford.edu (zzp at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-08-25 16:46:51: Raith Software Issues (Left Computer) Message-ID: <4057614.174.1345938412528.JavaMail.coral@shine> something related to RaithScsiDevice.dll and other dll files. Ebeam cannot be turned on/off from Raith software. Not sure if it is OK to do writing. From kcbalram at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: kcbalram at snf.stanford.edu (kcbalram at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-08-25 17:30:58: System good to go Message-ID: <33158700.175.1345941059105.JavaMail.coral@shine> The high speed pattern processor was off.... turned it on and restarted the system... works ok now For future reference: While logging in on the Raith PC, if you get a popup saying pattern generator off Demo mode enabled, make sure the high speed pattern generator (second box from top in the rack ) is turned on. You will need to do a hardware reboot afterwards (shutdown and then turn on, just hitting restart may or may not work) Best, Krishna From tbozorgg at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tbozorgg at snf.stanford.edu (tbozorgg at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-01 13:43:40: Message-ID: <8903794.42.1346532221520.JavaMail.coral@shine> From tbozorgg at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tbozorgg at snf.stanford.edu (tbozorgg at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-09-01 13:51:59: Fatal Loadlock Error Message-ID: <16373741.43.1346532719554.JavaMail.coral@shine> Stage locked and unable to unload. Given error "Fatal Error Loadlock: The system can be in a CRITICAL STATE" after procedure 'Unload:MoveStage1stPosition." Restarting Raith software did not help (but has on previous occasions of this error). From zzp at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: zzp at snf.stanford.edu (zzp at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-01 21:00:12: unload successfully Message-ID: <20920638.44.1346558412566.JavaMail.coral@shine> logged in with my account on Raith computer, unloading fine. From kcbalram at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: kcbalram at snf.stanford.edu (kcbalram at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-09-05 10:04:22: Clicking noise from Beam blank controller / high speed pattern processor Message-ID: <6230612.34.1346864663503.JavaMail.coral@shine> When the beam is turned on, there is a clicking noise from somewhere in the beam blank controller / high speed pattern processor and the stage position (X,Y coordinates)is fluctuating wildly. Loading / unloading stops the noise but it comes back once the beam is turned on again. I tried restarting the system but that did not work. I haven't seen this problem before. I am not sure the system is usable right now, hence I am shutting it down and reporting the problem to Raith field service. Best, Krishna From mtang at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-09-05 10:04:22: Clicking noise from Beam blank controller / high speed pattern processor Message-ID: <24279765.46.1346887918709.JavaMail.coral@shine> Lev has just repaired and tested the system and it should be good to go! From mtang at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: mtang at snf.stanford.edu (mtang at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-09-01 13:51:59: Fatal Loadlock Error Message-ID: <27887698.47.1346887938718.JavaMail.coral@shine> Lev repaired. From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-08-25 16:46:51: Raith Software Issues (Left Computer) Message-ID: <1941982.71.1347383429225.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-08-25 17:30:58: System good to go Message-ID: <28358371.72.1347383438011.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-01 13:43:40: Message-ID: <29058543.73.1347383443018.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-01 21:00:12: unload successfully Message-ID: <26976974.74.1347383447027.JavaMail.coral@shine> From lofaolain at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: lofaolain at snf.stanford.edu (lofaolain at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-21 08:29:31: Contamination on stage Message-ID: <28487946.4.1348241371813.JavaMail.coral@shine> From justinwu at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: justinwu at snf.stanford.edu (justinwu at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-10-11 13:02:34: I/O trip Message-ID: <21227663.90.1349985754890.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-10-11 13:02:34: I/O trip Message-ID: <18649601.99.1349989705367.JavaMail.coral@shine> water cooling shut down due to low level water in Hascres chiller. checked for leaks and found none, possibly increased evaporation rate from basement ventilation changes... resume pump and ebeam control package and am bringing FE-Gun back on line slowly. Should be ready for users after 4:30 to 5 PM. Call me if you have questions. James From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-10-30 10:27:05: monkey wrenching?!!!! Message-ID: <19143774.56.1351618025471.JavaMail.coral@shine> User reported overnight that there was no beam and that the beam blanking logic had become reversed. Could not reach that user reporting as they did not leave me a number to call back to... Upon my morning arrival to the lab at ten AM I found the system had been tampered with: -- laser power supply was switched off manually - Digital Pattern generator manual 'beam on' switch had been switched DOWN causing the beam to be always on... Sticker next to switch indicates this switch stays up was not seen by User reporting problem. System check out in progress, James From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-21 15:07:58: T Robot Arm Error Message-ID: <32223077.29.1352504209236.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-10-30 10:27:05: monkey wrenching?!!!! Message-ID: <7554928.30.1352504214245.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-09-21 08:29:31: Contamination on stage Message-ID: <19150360.31.1352504219253.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-13 16:23:18: relay board on stage controller faulted Message-ID: <14554400.23.1352852599419.JavaMail.coral@shine> 1. Someone manually turned off the laser interferometer power supply this morning. Users were running on coders... 2. just this last half hour the stage motor comtroller cards are switching irregularly and I am swapping boards to repair with raith FS on the phone. From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-13 16:23:18: relay board on stage controller faulted Message-ID: <5198851.26.1352854584927.JavaMail.coral@shine> removed and reseated all motor and stage controller boards after inspection. Found one loose board on second go around of testing. Tested X Y Z T motion and rehomed the LIStage to recalibrate. Green and up for users From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-13 17:14:49: stage rate controller Y axis Board failure Message-ID: <18541911.32.1352855690287.JavaMail.coral@shine> I don't have a spare system is down for users From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-13 17:14:49: stage rate controller Y axis Board failure Message-ID: <14855446.34.1352860210059.JavaMail.coral@shine> I checked all the boards for fit and snugness again. removed cleaned and replaced the main controller card and it ribbon cable. removed and replaced all cables and bnc's going into the stage comntroller unit. tested extensively across man hundreds of mm of movement and system test good... back to green and will stay in Palo Alto tonight to be near and have easy access to Users overnight From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-14 08:40:03: Laser interferometer Stage positioning problems Message-ID: <15743436.41.1352911203571.JavaMail.coral@shine> Early in the morning of 11-13 User reported drive positioning issues when in joytsick control of starnge slewing. This has been observed and is normal when stage in coder mode control. The problem was sourced to Laser interferometer Power supply that had been switched off manually from the front panel switch. This was not done by the User on the system at the time and presumably a lab member unknown came into the lab and switched the power off to disrupt operations. This is the second incident inthe lab over the last two weeks of this nature. 3:00 PM Tuesday 11-13-12 -- User dianmin reported hearing clicking noises coming from the stage controller unit at the end of X-Y moves when stage was under interferoemeter control. Through the later afternoon and into the evening we troubleshot the system, with Raith FS by phone. We tried to remove and reseat all the PC cards in the unit except the power supply transformer, followed by removing and replacing in position all the rear panel connectors. I found the AC strip power cords pulled from the mountings and the back cover bent back out of the previous position. I requested RAITH FS to come on site to effect repairs and to ship me a new FBMS capable stage controller unit and this will take several days to be received and installed. Users can use the system under coder mode oepration if they do not need to stitch write fields together or for SEM operations and we will be resuming operations with JWC presence during these runs this afternoon. JWC From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-14 08:40:03: Laser interferometer Stage positioning problems Message-ID: <30290987.60.1352933373898.JavaMail.coral@shine> intermittent problem to green mode to test the critical emotion detector From tasyurek at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tasyurek at snf.stanford.edu (tasyurek at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-17 14:04:30: clicking sound is back, switched to coder Message-ID: <15907671.140.1353189871290.JavaMail.coral@shine> From zfyu at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: zfyu at snf.stanford.edu (zfyu at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-11-17 22:19:39: problem still exists Message-ID: <20335670.146.1353219580004.JavaMail.coral@shine> the stage cannot use laser mode, has to be coder mode. clicking sound in laser mode From tkodama at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tkodama at snf.stanford.edu (tkodama at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-11-18 20:17:59: I had same problem Message-ID: <27020619.2.1353298680037.JavaMail.coral@shine> I also encountered the issue. It is probably due to fluctuation of piezo stage and even if the controller turned off once, it was appeared again. From waqasm at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: waqasm at snf.stanford.edu (waqasm at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-19 17:17:13: exchanged unit and board swaps did not effect repairs Message-ID: <13514081.9.1353374233860.JavaMail.coral@shine> exchanged unit and board swaps did not effect repairs... I swapped out the SNF specific FBMS stage controller cards and microporocesser board as instructed No improvement in the LIStage peizo actuation. Upon moving the LIStage in interferometer control we still hear the replays chattering and the stage jumping back and forth across X and Y axis. Next hint ...? ANother request for RAITH Field Service to arrive on site to effect repairs and troubleshoot. Users will need to work in coders or delay their work. James JWC From tasyurek at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tasyurek at snf.stanford.edu (tasyurek at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-19 18:27:48: robot arm not moving Message-ID: <1827945.12.1353378469046.JavaMail.coral@shine> My wafer is inside. Something maybe wrong with new controller box. Waqas Mustafeez From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-19 18:27:48: robot arm not moving Message-ID: <3160672.1.1353446779562.JavaMail.coral@shine> resolved From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-19 17:17:13: exchanged unit and board swaps did not effect repairs Message-ID: <613258.3.1353446870460.JavaMail.coral@shine> swapped more boards from new to old; old to new checked and vefified the motor I/O pulse calibration settings In further testing the gremlin went away and I desire users to test while I am at lunch to see if the gremlin returned everything test out OK on my end for this moment in time From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-11-18 20:17:59: I had same problem Message-ID: <29578470.4.1353446876529.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-11-17 22:19:39: problem still exists Message-ID: <7243012.5.1353446879557.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-17 14:04:30: clicking sound is back, switched to coder Message-ID: <9958945.6.1353446884614.JavaMail.coral@shine> From zfyu at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: zfyu at snf.stanford.edu (zfyu at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-21 16:31:59: gun cannot start. Message-ID: <32783721.14.1353544319976.JavaMail.coral@shine> cannot start the gun. gun went on extractor trip and was down afterwards. Fil current remains zero and no EHT voltage when restarting. Samples are still in. From chalabi at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: chalabi at snf.stanford.edu (chalabi at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-21 20:09:01: Robot arm stuck with samples inside Message-ID: <11844453.19.1353557342197.JavaMail.coral@shine> The problem with electron beam has been resolved. But robot arm get stuck during the unloading process. Robot arm is at the middle of its way. From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-11-21 20:09:01: Robot arm stuck with samples inside Message-ID: <16604072.35.1353963634872.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-11-21 16:31:59: gun cannot start. Message-ID: <15495672.36.1353963638921.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-11-26 13:01:00: raith champions only this afternoon till we have completed testing Message-ID: <1288232.37.1353963661130.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-11-26 13:01:00: raith champions only this afternoon till we have completed testing Message-ID: <12189822.9.1354127887381.JavaMail.coral@shine> From tberg at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tberg at snf.stanford.edu (tberg at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-12-05 09:58:40: Raith is now on badger Message-ID: <13859719.4.1354730320932.JavaMail.coral@shine> Now no more "on"led we have a red for disabled and green for enabled From tasyurek at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: tasyurek at snf.stanford.edu (tasyurek at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-12-09 14:16:05: beam is not blanked when driven to positions Message-ID: <4758594.2.1355091366892.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Problem raith SNF 2012-12-09 14:16:05: beam is not blanked when driven to positions Message-ID: <5177132.1.1355173704964.JavaMail.coral@shine> This was resolved over the telephone several minutes after this was placed in yellow Sunday afternoon. Could not clear this item on coral until I got into work... From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Comment raith SNF 2012-12-14 12:52:03: New Belt Message-ID: <8237817.27.1355518324143.JavaMail.coral@shine> From jwc at snf.stanford.edu Sun Dec 23 09:15:07 2012 From: jwc at snf.stanford.edu (jwc at snf.stanford.edu) Date: Sun, 23 Dec 2012 17:15:07 -0000 Subject: Shutdown raith SNF 2012-12-19 16:03:28: shut down for holiday PM back up for user s1-8-2013 at 18:00 hours Message-ID: <4207203.36.1355961808587.JavaMail.coral@shine> shut down for holiday PM back up for user s1-8-2013 at 18:00 hours