From arvisun at stanford.edu Sat Feb 15 23:18:21 2003 From: arvisun at stanford.edu (arvind sundaramurthy) Date: Sat, 15 Feb 2003 23:18:21 -0800 Subject: Problem(Sigh....) with the Raith Message-ID: <000e01c2d58b$96688d80$865540ab@stanford.edu> hi james, I was working on the raith tonight. I logged in, set 'z', the voltage to 30Kev and aperture to 10um. I then started working on my layout. An error "Error Number 519: EHT Set Extractor Trip" popped up on the SEM monitor. There was an error on the raith status report " Error reading IEEE 488". The stage did not respond to any movement of the joystick. I closed all programs on the raith and the SEM column program & then tried to log back on. But raith gave me the following error:"Error PZT control EDA2/3,piezo hardware not connected" when I opened it and then the message " Error reading IEEE 488" was found on the status report. I tried unloading my sample and it wouldn't let me do it. I think it is down till you get to see whats happening with it. I hope its something that's fixable at the earliest. arvind -------------- next part -------------- An HTML attachment was scrubbed... URL: From mtopinka at stanford.edu Sat Feb 15 23:24:45 2003 From: mtopinka at stanford.edu (Mark Topinka) Date: Sat, 15 Feb 2003 23:24:45 -0800 Subject: Problem(Sigh....) with the Raith In-Reply-To: <000e01c2d58b$96688d80$865540ab@stanford.edu> Message-ID: <5.2.0.9.0.20030215232352.01c872c0@localhost> This is a major bummer. James- how bad does it sound? Are we out of business indefinitely again? -Mark At 11:18 PM 2/15/2003 -0800, arvind sundaramurthy wrote: >hi james, >I was working on the raith tonight. I logged in, set 'z', the voltage to >30Kev and aperture to 10um. I then started working on my layout. An error >"Error Number 519: EHT Set Extractor Trip" popped up on the SEM monitor. >There was an error on the raith status report " Error reading IEEE 488". >The stage did not respond to any movement of the joystick. I closed all >programs on the raith and the SEM column program & then tried to log back >on. But raith gave me the following error:"Error PZT control EDA2/3,piezo >hardware not connected" when I opened it and then the message " Error >reading IEEE 488" was found on the status report. > >I tried unloading my sample and it wouldn't let me do it. I think it is >down till you get to see whats happening with it. I hope its something >that's fixable at the earliest. > >arvind -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Tue Feb 18 08:45:35 2003 From: jwc at snf.stanford.edu (James Conway) Date: Tue, 18 Feb 2003 08:45:35 -0800 Subject: Problem(Sigh....) with the Raith References: <000e01c2d58b$96688d80$865540ab@stanford.edu> Message-ID: <3E52632F.6040304@snf.stanford.edu> Hello ALL, We are on it and will know if we are back up by noon today. IEE-488 bus dropped after an EHT trip from the FE-gun area. Lets see what else may have been damaged. LEO has been requested to come in and look at this problem. James arvind sundaramurthy wrote: > hi james, > I was working on the raith tonight. I logged in, set 'z', the voltage > to 30Kev and aperture to 10um. I then started working on my layout. An > error "Error Number 519: EHT Set Extractor Trip" popped up on the SEM > monitor. There was an error on the raith status report " Error reading > IEEE 488". The stage did not respond to any movement of the joystick. > I closed all programs on the raith and the SEM column program & then > tried to log back on. But raith gave me the following error:"Error PZT > control EDA2/3,piezo hardware not connected" when I opened it and then > the message " Error reading IEEE 488" was found on the status report. > > I tried unloading my sample and it wouldn't let me do it. I think it > is down till you get to see whats happening with it. I hope its > something that's fixable at the earliest. > > arvind From jwc at snf.stanford.edu Tue Feb 18 08:46:35 2003 From: jwc at snf.stanford.edu (James Conway) Date: Tue, 18 Feb 2003 08:46:35 -0800 Subject: Problem(Sigh....) with the Raith References: <5.2.0.9.0.20030215232352.01c872c0@localhost> Message-ID: <3E52636B.4020303@snf.stanford.edu> I should be able to get it back up if the FE-gun is still intact... More at Noon. JWC Mark Topinka wrote: > This is a major bummer. James- how bad does it sound? Are we out of > business indefinitely again? -Mark > > At 11:18 PM 2/15/2003 -0800, arvind sundaramurthy wrote: > >> hi james, >> I was working on the raith tonight. I logged in, set 'z', the >> voltage to 30 keV and aperture to 10 um. I then started working on my >> layout. An error "Error Number 519: EHT Set Extractor Trip" popped up >> on the SEM monitor. There was an error on the raith status report " >> Error reading IEEE 488". The stage did not respond to any movement of >> the joystick. I closed all programs on the raith and the SEM column >> program & then tried to log back on. But raith gave me the following >> error:"Error PZT control EDA2/3,piezo hardware not connected" when I >> opened it and then the message " Error reading IEEE 488" was found on >> the status report. >> >> I tried unloading my sample and it wouldn't let me do it. I think it >> is down till you get to see whats happening with it. I hope its >> something that's fixable at the earliest. >> >> arvind > From apbubble at stanford.edu Wed Feb 19 14:14:58 2003 From: apbubble at stanford.edu (Yin Yuen) Date: Wed, 19 Feb 2003 14:14:58 -0800 Subject: Reservation Removed Tonight 5-12 Message-ID: <5.1.0.14.2.20030219141344.00bab350@apbubble.pobox.stanford.edu> Done with stuff early last night. Reservation is up for takes. Sorry for the late notice. -Yin From cshen at briontech.com Fri Feb 28 15:04:32 2003 From: cshen at briontech.com (cshen at briontech.com) Date: Fri, 28 Feb 2003 15:04:32 -0800 (PST) Subject: Raith is free now Message-ID: <61276.171.64.100.112.1046473472.squirrel@mail.briontech.com> I've also cancelled the reservations for this weekend.