From zhangy at stanford.edu Mon Sep 1 18:26:44 2008 From: zhangy at stanford.edu (Yuan Zhang) Date: Mon, 1 Sep 2008 18:26:44 -0700 (PDT) Subject: Raith free till 9:30pm Message-ID: <462753717.644911220318804304.JavaMail.root@zm03.stanford.edu> Finished early, and nobody reserved until 9:30p. From kocabas at stanford.edu Wed Sep 3 12:10:14 2008 From: kocabas at stanford.edu (S. Ekin Kocabas) Date: Wed, 03 Sep 2008 12:10:14 -0700 Subject: Raith Free now --- Sept 3, 2008 from 12:10 till 13:30 In-Reply-To: <22ffcd060808291106p1d0a3018jc5971e0c1d5df473@mail.gmail.com> References: <22ffcd060808291106p1d0a3018jc5971e0c1d5df473@mail.gmail.com> Message-ID: <48BEE116.70605@stanford.edu> My session ended earlier than I expected. Raith is free till 13:30. Ekin From dalyx at stanford.edu Wed Sep 3 14:07:36 2008 From: dalyx at stanford.edu (Dany-Sebastien Ly-Gagnon) Date: Wed, 3 Sep 2008 14:07:36 -0700 Subject: RAITH free tonight 6:30pm - 9:30pm Message-ID: <7f014b6b0809031407m7946f18fld20231ae9a0c95b6@mail.gmail.com> Samples won't be ready. Dany -------------- next part -------------- An HTML attachment was scrubbed... URL: From pgallagher at stanford.edu Wed Sep 3 14:48:07 2008 From: pgallagher at stanford.edu (Patrick Gallagher) Date: Wed, 3 Sep 2008 14:48:07 -0700 Subject: raith free 5:30-6:30 pm today Message-ID: <81ce74de0809031448h5984089ej197ac7ab2771bb2f@mail.gmail.com> took earlier slot -------------- next part -------------- An HTML attachment was scrubbed... URL: From kimsangb at stanford.edu Wed Sep 3 23:02:18 2008 From: kimsangb at stanford.edu (SangBum Kim) Date: Wed, 3 Sep 2008 23:02:18 -0700 (PDT) Subject: raith free now Message-ID: <785492014.1883681220508138128.JavaMail.root@zm01.stanford.edu> finished early SangBum From slatif at stanford.edu Sat Sep 6 21:47:43 2008 From: slatif at stanford.edu (Salman Latif) Date: Sat, 6 Sep 2008 21:47:43 -0700 (PDT) Subject: Raith Load Lock Error Message-ID: <1651103689.1088641220762863901.JavaMail.root@zm06.stanford.edu> Hi all, I encountered a load lock error while unloading the previous user's sample. I followed the instructions for the manual unload procedure, but it came back to the same error message ("it is not possible to reach the outer position of the robot arm"). I talked with Xinran, and he said that no one should use the system (since it's in a critical state) before one of the raith champions comes in and clears the error. I am canceling my session and leaving the system as is. I'll report the error on Coral. Salman. From zhangy at stanford.edu Sat Sep 6 23:30:39 2008 From: zhangy at stanford.edu (Yuan Zhang) Date: Sat, 6 Sep 2008 23:30:39 -0700 Subject: Raith Load Lock Error In-Reply-To: <1651103689.1088641220762863901.JavaMail.root@zm06.stanford.edu> Message-ID: <20080907063038.E460B60DED8@smtp3.stanford.edu> Hi Salman, Thanks for reporting the problem. I'll go there tomorrow morning around 10 and try to fix the error. Yuan -----Original Message----- From: Salman Latif [mailto:slatif at stanford.edu] Sent: Saturday, September 06, 2008 9:48 PM To: raith at snf.stanford.edu Subject: Raith Load Lock Error Hi all, I encountered a load lock error while unloading the previous user's sample. I followed the instructions for the manual unload procedure, but it came back to the same error message ("it is not possible to reach the outer position of the robot arm"). I talked with Xinran, and he said that no one should use the system (since it's in a critical state) before one of the raith champions comes in and clears the error. I am canceling my session and leaving the system as is. I'll report the error on Coral. Salman. From zhangy at stanford.edu Sun Sep 7 11:40:53 2008 From: zhangy at stanford.edu (Yuan Zhang) Date: Sun, 7 Sep 2008 11:40:53 -0700 (PDT) Subject: Raith Load Lock Error In-Reply-To: <1454082049.1141311220812616117.JavaMail.root@zm03.stanford.edu> Message-ID: <126868881.1141501220812853075.JavaMail.root@zm03.stanford.edu> Hi all, The previous user's sample was unloaded. I tried the load and unload procedures again, and the robot arm worked fine for me. I'll release the tool to users, but please keep an eye on the robot arm. If you meet the same problem later today, please follow the instruction and use the joystick to slightly push it out. If manual unload doesn't work, please let Xinran or me know, and we'll help you unload the samples. Thanks, Yuan ----- Original Message ----- From: "Yuan Zhang" To: "Salman Latif" , raith at snf.stanford.edu Sent: Saturday, September 6, 2008 11:30:39 PM GMT -08:00 US/Canada Pacific Subject: RE: Raith Load Lock Error Hi Salman, Thanks for reporting the problem. I'll go there tomorrow morning around 10 and try to fix the error. Yuan -----Original Message----- From: Salman Latif [mailto:slatif at stanford.edu] Sent: Saturday, September 06, 2008 9:48 PM To: raith at snf.stanford.edu Subject: Raith Load Lock Error Hi all, I encountered a load lock error while unloading the previous user's sample. I followed the instructions for the manual unload procedure, but it came back to the same error message ("it is not possible to reach the outer position of the robot arm"). I talked with Xinran, and he said that no one should use the system (since it's in a critical state) before one of the raith champions comes in and clears the error. I am canceling my session and leaving the system as is. I'll report the error on Coral. Salman. From jwc at snf.stanford.edu Mon Sep 8 14:58:53 2008 From: jwc at snf.stanford.edu (James Conway) Date: Mon, 08 Sep 2008 14:58:53 -0700 Subject: Please be careful and considerate when you are making reservations and cancelling them for the RAITH System. Message-ID: <48C5A01D.5070308@snf.stanford.edu> An HTML attachment was scrubbed... URL: From kathrynt at stanford.edu Mon Sep 8 18:32:10 2008 From: kathrynt at stanford.edu (Kathryn Todd) Date: Mon, 8 Sep 2008 18:32:10 -0700 Subject: raith free till 7pm Message-ID: <4070ecc80809081832s18fb44dfnafa79372b6cbe952@mail.gmail.com> Ready for next user/ From jwc at snf.stanford.edu Tue Sep 9 12:20:14 2008 From: jwc at snf.stanford.edu (James Conway) Date: Tue, 09 Sep 2008 12:20:14 -0700 Subject: I will work with you during your raith session today to troubleshoot issues with the T transfer arm . Message-ID: <48C6CC6E.9080303@snf.stanford.edu> Salman: Sorry to learn you had problems on the tools during your sessions recently. I am available for some time this afternoon after 1:30 PM. So I can work with you during your raith session today to troubleshoot issues with the T transfer arm using your login. See you at 1:30 - 1:40 PM in the Raith room. All the Best, JWC -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Tue Sep 9 17:44:20 2008 From: jwc at snf.stanford.edu (James Conway) Date: Tue, 09 Sep 2008 17:44:20 -0700 Subject: Raith Load Lock Error In-Reply-To: <126868881.1141501220812853075.JavaMail.root@zm03.stanford.edu> References: <126868881.1141501220812853075.JavaMail.root@zm03.stanford.edu> Message-ID: <48C71864.8090201@snf.stanford.edu> Good Job Yuan! Thank you for your help and system support during my vacation away from SNF! Current RAITH system status: Today I tested the system and established new outer robot arm position set point after repeatedly homing the T axis to remove any delta T errors. I tested the load / unload procedure four times on three different logins and all seems fine! This should take care of the problem. If any loader issues return it is likely we will need to swap out to a new loader drive belt. Thank you for your support! Good Evening, James Conway Yuan Zhang wrote: > Hi all, > > The previous user's sample was unloaded. I tried the load and unload procedures again, and the robot arm worked fine for me. I'll release the tool to users, but please keep an eye on the robot arm. If you meet the same problem later today, please follow the instruction and use the joystick to slightly push it out. If manual unload doesn't work, please let Xinran or me know, and we'll help you unload the samples. > > Thanks, > Yuan > > ----- Original Message ----- > From: "Yuan Zhang" > To: "Salman Latif" , raith at snf.stanford.edu > Sent: Saturday, September 6, 2008 11:30:39 PM GMT -08:00 US/Canada Pacific > Subject: RE: Raith Load Lock Error > > Hi Salman, > > Thanks for reporting the problem. I'll go there tomorrow morning around 10 > and try to fix the error. > > Yuan > > > -----Original Message----- > From: Salman Latif [mailto:slatif at stanford.edu] > Sent: Saturday, September 06, 2008 9:48 PM > To: raith at snf.stanford.edu > Subject: Raith Load Lock Error > > Hi all, > > I encountered a load lock error while unloading the previous user's sample. > I followed the instructions for the manual unload procedure, but it came > back to the same error message ("it is not possible to reach the outer > position of the robot arm"). I talked with Xinran, and he said that no one > should use the system (since it's in a critical state) before one of the > raith champions comes in and clears the error. I am canceling my session and > leaving the system as is. I'll report the error on Coral. > > Salman. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From shott at stanford.edu Wed Sep 10 10:22:51 2008 From: shott at stanford.edu (John Shott) Date: Wed, 10 Sep 2008 10:22:51 -0700 Subject: Raith will be affected by power outage tomorrow morning .... Message-ID: <48C8026B.50206@stanford.edu> James and Raith Community: While I had hoped that it was only going to be the Hitachi E-beam that was going to be afffected by the power outage (because that's the way the panel was labeled), a little more looking shows that the Raith will also be affected by the scheduled power outage tomorrow. The main switch to the Raith (the box on your left at thigh level as you enter the room) is powered from Panel RRUPS-3 .... which is one of the panels that will be out tomorrow. So, you should make plans for a graceful shutdown prior to 8 a.m. tomorrow morning. (Note: I've checked in the tunnel and the chiller for the turbo won't actually go off because it is powered from a separate panel. At this point, I have been unable to find the main disconnect for the SEM4160 to see if it is also powered by this panel and it is in use at the moment so I can't do too much poking around. I'm sorry to have to let you know that the Raith will also be affected but am confident that being able to do an orderly power down is better than simply cutting power .... Let me know if you have any questions, John From jwc at snf.stanford.edu Wed Sep 10 15:05:52 2008 From: jwc at snf.stanford.edu (James Conway) Date: Wed, 10 Sep 2008 15:05:52 -0700 Subject: Raith will be affected by power outage tomorrow morning .... In-Reply-To: <48C8026B.50206@stanford.edu> References: <48C8026B.50206@stanford.edu> Message-ID: <48C844C0.3020903@snf.stanford.edu> Raith Community: I will be taking the system off line from users about ten minutes before the power shut down. Users samples inside the can remain inside until we have the system back up and complete your work. I expect all users to be flexible in their reservation slots until we catch up to the queue after we resume operations. Thats why we all call it the RAITH Community! :-) Thank you for your support! James Conway John Shott wrote: > James and Raith Community: > > While I had hoped that it was only going to be the Hitachi E-beam that > was going to be afffected by the power outage (because that's the way > the panel was labeled), a little more looking shows that the Raith > will also be affected by the scheduled power outage tomorrow. The > main switch to the Raith (the box on your left at thigh level as you > enter the room) is powered from Panel RRUPS-3 .... which is one of the > panels that will be out tomorrow. > > So, you should make plans for a graceful shutdown prior to 8 a.m. > tomorrow morning. (Note: I've checked in the tunnel and the chiller > for the turbo won't actually go off because it is powered from a > separate panel. > > At this point, I have been unable to find the main disconnect for the > SEM4160 to see if it is also powered by this panel and it is in use at > the moment so I can't do too much poking around. > > I'm sorry to have to let you know that the Raith will also be affected > but am confident that being able to do an orderly power down is better > than simply cutting power .... > > Let me know if you have any questions, > > John > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kimsangb at stanford.edu Wed Sep 10 15:53:50 2008 From: kimsangb at stanford.edu (SangBum Kim) Date: Wed, 10 Sep 2008 15:53:50 -0700 (PDT) Subject: Could you enable raith over me please? Message-ID: <1440872095.3454581221087230804.JavaMail.root@zm01.stanford.edu> Dear user krivoire, I think my remote coral had some problems and it showed that the raith was not enabled by anyone. That made me think that it is available to use so I enabled it with my coral name and came to the raith room. It turns out you were writing your patterns with the raith. Could you do me a favor? Could you enable over me please? Thanks, SangBum From krivoire at stanford.edu Wed Sep 10 15:56:59 2008 From: krivoire at stanford.edu (Kelley Rivoire) Date: Wed, 10 Sep 2008 15:56:59 -0700 Subject: Could you enable raith over me please? In-Reply-To: <1440872095.3454581221087230804.JavaMail.root@zm01.stanford.edu> References: <1440872095.3454581221087230804.JavaMail.root@zm01.stanford.edu> Message-ID: <18d3aabd0809101556s7a3ea9d8v5f14c85cc5ee200@mail.gmail.com> Hi SangBum, I am enabled now (continuing my session that I had enabled at 1:06 pm) thanks, Kelley On Wed, Sep 10, 2008 at 3:53 PM, SangBum Kim wrote: > Dear user krivoire, > > I think my remote coral had some problems and it showed that the raith was not enabled by anyone. That made me think that it is available to use so I enabled it with my coral name and came to the raith room. It turns out you were writing your patterns with the raith. > > Could you do me a favor? Could you enable over me please? > > Thanks, > SangBum > > > From jwc at snf.stanford.edu Wed Sep 10 17:48:18 2008 From: jwc at snf.stanford.edu (James Conway) Date: Wed, 10 Sep 2008 17:48:18 -0700 Subject: Could you enable raith over me please? In-Reply-To: <18d3aabd0809101556s7a3ea9d8v5f14c85cc5ee200@mail.gmail.com> References: <1440872095.3454581221087230804.JavaMail.root@zm01.stanford.edu> <18d3aabd0809101556s7a3ea9d8v5f14c85cc5ee200@mail.gmail.com> Message-ID: <48C86AD2.1040404@snf.stanford.edu> Hi There, Do I need to make any adjustments to the history on this tool? It appears that everything is OK. Best, JWC Kelley Rivoire wrote: > Hi SangBum, > > I am enabled now (continuing my session that I had enabled at 1:06 pm) > > thanks, > Kelley > > On Wed, Sep 10, 2008 at 3:53 PM, SangBum Kim wrote: > >> Dear user krivoire, >> >> I think my remote coral had some problems and it showed that the raith was not enabled by anyone. That made me think that it is available to use so I enabled it with my coral name and came to the raith room. It turns out you were writing your patterns with the raith. >> >> Could you do me a favor? Could you enable over me please? >> >> Thanks, >> SangBum >> >> >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: From zhangy at stanford.edu Fri Sep 12 00:13:53 2008 From: zhangy at stanford.edu (Yuan Zhang) Date: Fri, 12 Sep 2008 00:13:53 -0700 (PDT) Subject: Raith free 9-12am Friday night Message-ID: <579461448.141191221203633500.JavaMail.root@zm03.stanford.edu> Sample won't be ready. From faraon at stanford.edu Fri Sep 12 09:10:14 2008 From: faraon at stanford.edu (Andrei Faraon) Date: Fri, 12 Sep 2008 09:10:14 -0700 Subject: Raith free today 12pm-2pm Message-ID: <28d3ece90809120910k72babdbvf8a6474e2bede3d1@mail.gmail.com> -- Andrei Faraon Stanford University, Applied Physics 316 Via Pueblo Mall Stanford, CA, 94305 Mobile: 650 714 7881 Office: 650 723 2279 www.stanford.edu/~faraon -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahazeghi at stanford.edu Mon Sep 15 14:29:47 2008 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Mon, 15 Sep 2008 14:29:47 -0700 Subject: Reservation removed 17:30-21:30 Message-ID: <005d01c9177a$2dbd27f0$893777d0$@edu> Sorry for rather short notice but I was supposed to receive my sample this morning, it hasn't arrived yet so I am cancelling my reservation. Arash ---------------------------------------------------------------------------- ------ Arash Hazeghi PhD Candidate Stanford Center for Integrated Systems CIS-X 300, 420 Via Palou Mall, Stanford, CA 94305 phone: +1-650-725-0418 web: http://www.stanford.edu/~ahazeghi -------------- next part -------------- An HTML attachment was scrubbed... URL: From toecutter at att.blackberry.net Thu Sep 18 13:37:56 2008 From: toecutter at att.blackberry.net (toecutter at att.blackberry.net) Date: Thu, 18 Sep 2008 20:37:56 +0000 Subject: Last call share the ride? Message-ID: <288804427-1221770222-cardhu_decombobulator_blackberry.rim.net-460606588-@bxe243.bisx.prod.on.blackberry> I likely will not need entire session today. Last call to share the ride? RSVP to me or call 4154124825 now! JWC Sent via BlackBerry by AT&T From toecutter at att.blackberry.net Thu Sep 18 16:19:32 2008 From: toecutter at att.blackberry.net (toecutter at att.blackberry.net) Date: Thu, 18 Sep 2008 23:19:32 +0000 Subject: Finished early Message-ID: <1905575301-1221779917-cardhu_decombobulator_blackberry.rim.net-1508535494-@bxe243.bisx.prod.on.blackberry> Hello I have finished early on the tool. He whom enables first can have the tool till 1800 hours. James Sent via BlackBerry by AT&T From ytcheng at stanford.edu Sat Sep 20 11:19:24 2008 From: ytcheng at stanford.edu (Yao-Te Cheng) Date: Sat, 20 Sep 2008 11:19:24 -0700 Subject: raith free 2pm-7pm today Message-ID: <000001c91b4d$693a4cf0$3baee6d0$@edu> Sample is not ready. -------------- next part -------------- An HTML attachment was scrubbed... URL: From zhangy at stanford.edu Sun Sep 21 11:05:16 2008 From: zhangy at stanford.edu (Yuan Zhang) Date: Sun, 21 Sep 2008 11:05:16 -0700 Subject: Raith free 12:30-3pm Message-ID: <20080921180514.1461760EA88@smtp3.stanford.edu> Sorry for the late notice. My sample preparation will be delayed. -------------- next part -------------- An HTML attachment was scrubbed... URL: From bilee at stanford.edu Mon Sep 22 03:29:56 2008 From: bilee at stanford.edu (Byoungil Lee) Date: Mon, 22 Sep 2008 03:29:56 -0700 Subject: Raith free 0-2:30am on SEP 26. References: <20080921180514.1461760EA88@smtp3.stanford.edu> Message-ID: <21B841F341D24883B4C00AE42F263679@BILEEOFFICE> Raith free 0-2:30am on SEP 26. - Byoungil -------------- next part -------------- An HTML attachment was scrubbed... URL: From xinranw at stanford.edu Tue Sep 23 01:34:12 2008 From: xinranw at stanford.edu (Xinran Wang) Date: Tue, 23 Sep 2008 01:34:12 -0700 Subject: raith free 9:00-10:00 Message-ID: <22ffcd060809230134h45280686v70579c77bcb1d9be@mail.gmail.com> I will have a class then. Sorry for the last minute notice. Xinran -------------- next part -------------- An HTML attachment was scrubbed... URL: From xinranw at stanford.edu Tue Sep 23 11:36:25 2008 From: xinranw at stanford.edu (Xinran Wang) Date: Tue, 23 Sep 2008 11:36:25 -0700 Subject: doen early, raith free until 1pm Message-ID: <22ffcd060809231136t4cb6d1a2g8c2b4fee38bf74ba@mail.gmail.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: From xinranw at stanford.edu Fri Sep 26 10:40:14 2008 From: xinranw at stanford.edu (Xinran Wang) Date: Fri, 26 Sep 2008 10:40:14 -0700 Subject: Please clean your sample in ebeam pass through Message-ID: <22ffcd060809261040v3dc10e37j46645565691c025a@mail.gmail.com> Hi All, James asked everyone to remove your sample from the ebeam pass through by Monday, he will clean it up some time in next week. Thanks, Xinran -------------- next part -------------- An HTML attachment was scrubbed... URL: From dalyx at stanford.edu Fri Sep 26 19:59:05 2008 From: dalyx at stanford.edu (Dany-Sebastien Ly-Gagnon) Date: Fri, 26 Sep 2008 19:59:05 -0700 Subject: Offline computer password Message-ID: <7f014b6b0809261959u1c4ac72fufc628caa8758e22a@mail.gmail.com> FYI: It took me several trials to figure out what was written under the keyboard: "TSou%a" Best, Dany -------------- next part -------------- An HTML attachment was scrubbed... URL: From xutian at stanford.edu Fri Sep 26 22:59:45 2008 From: xutian at stanford.edu (Xu Tian) Date: Fri, 26 Sep 2008 22:59:45 -0700 Subject: Raith free Sunday 16:30-19:00 Message-ID: Sample won't be ready. Xu From xinranw at stanford.edu Tue Sep 30 11:22:45 2008 From: xinranw at stanford.edu (Xinran Wang) Date: Tue, 30 Sep 2008 11:22:45 -0700 Subject: raith free till 13:00 Message-ID: <22ffcd060809301122r7c435f92g44db60e3cd02e5c8@mail.gmail.com> done early. Enjoy, Xinran -------------- next part -------------- An HTML attachment was scrubbed... URL: