From xutian at stanford.edu Wed Mar 2 21:00:29 2011 From: xutian at stanford.edu (Xu Tian) Date: Wed, 2 Mar 2011 21:00:29 -0800 (PST) Subject: Release Raith 9:00-12pm tonight Message-ID: <93251264.544301.1299128429657.JavaMail.root@zm02.stanford.edu> Done too early than I expected. Xu From yuxinz at stanford.edu Thu Mar 3 17:54:38 2011 From: yuxinz at stanford.edu (Yuxin Zheng) Date: Thu, 3 Mar 2011 17:54:38 -0800 (PST) Subject: raith session released (7pm~) Message-ID: <1687293693.604386.1299203678468.JavaMail.root@zm06.stanford.edu> From zzp at stanford.edu Thu Mar 3 17:55:42 2011 From: zzp at stanford.edu (Zhiping Zhang) Date: Thu, 3 Mar 2011 17:55:42 -0800 Subject: raith session released (7pm~) In-Reply-To: <1687293693.604386.1299203678468.JavaMail.root@zm06.stanford.edu> References: <1687293693.604386.1299203678468.JavaMail.root@zm06.stanford.edu> Message-ID: <68970A79E1AE4F7B9013177E257BD044@stanford.edu> Taken. _____ From: Yuxin Zheng [mailto:yuxinz at stanford.edu] Sent: Thursday, March 03, 2011 5:55 PM To: raith at snf.stanford.edu Subject: raith session released (7pm~) -------------- next part -------------- An HTML attachment was scrubbed... URL: From sgchong at stanford.edu Thu Mar 3 23:04:27 2011 From: sgchong at stanford.edu (Soogine Chong) Date: Thu, 3 Mar 2011 23:04:27 -0800 (PST) Subject: raith free 3/4 10PM-1AM & 3/5 9PM-12AM Message-ID: <607853739.949583.1299222267922.JavaMail.root@zm07.stanford.edu> -- Soogine Chong Stanford University PhD candidate in Electrical Engineering e-mail: sgchong at stanford.edu mobile: +1-650-804-8556 From ahazeghi at stanford.edu Fri Mar 4 07:32:28 2011 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Fri, 4 Mar 2011 07:32:28 -0800 (PST) Subject: Starting 30min late Message-ID: I am starting my session at 830 Thanks Arash Hazeghi PhD Candidate Stanford Center for Integrated Systems Paul G. Allen Ext. 300 420 Via Palou Mall, Stanford, CA 94305 Office:+1-650-725-0418 cell:+1-650-353-1866 From ahazeghi at stanford.edu Fri Mar 4 10:54:09 2011 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Fri, 4 Mar 2011 10:54:09 -0800 Subject: piezo hardware error Message-ID: <002301cbda9d$8bc05730$a3410590$@stanford.edu> Greetings RAITH users, I was using the system (everything was normal) when I heard a click/hiss sound. It seemed like the data link between the software and stage control/beam had been lost. I power cycled both PCs and upon launching the RAITH software I get the following error "piezo hardware not connected" . Imaging and other functions seem to work normally but obviously there is no stage pizeo control. I am yellow-lightning the tool. Thanks, Arash -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Fri Mar 4 10:55:10 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Fri, 04 Mar 2011 10:55:10 -0800 Subject: piezo hardware error In-Reply-To: <002301cbda9d$8bc05730$a3410590$@stanford.edu> References: <002301cbda9d$8bc05730$a3410590$@stanford.edu> Message-ID: <4D71358E.1090401@snf.stanford.edu> An HTML attachment was scrubbed... URL: From ahazeghi at stanford.edu Fri Mar 4 11:18:00 2011 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Fri, 4 Mar 2011 11:18:00 -0800 Subject: piezo hardware error In-Reply-To: <4D71358E.1090401@snf.stanford.edu> References: <002301cbda9d$8bc05730$a3410590$@stanford.edu> <4D71358E.1090401@snf.stanford.edu> Message-ID: <003001cbdaa0$e0c91c50$a25b54f0$@stanford.edu> Thanks James for helping From: James W. Conway [mailto:jwc at snf.stanford.edu] Sent: Friday, March 04, 2011 10:55 AM To: ahazeghi at stanford.edu; Ebeam Lab Subject: Re: piezo hardware error Just perform a hardware reset after gracefully exiting the application On 3/4/2011 10:54 AM, Arash Hazeghi wrote: Greetings RAITH users, I was using the system (everything was normal) when I heard a click/hiss sound. It seemed like the data link between the software and stage control/beam had been lost. I power cycled both PCs and upon launching the RAITH software I get the following error "piezo hardware not connected" . Imaging and other functions seem to work normally but obviously there is no stage pizeo control. I am yellow-lightning the tool. Thanks, Arash -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahazeghi at stanford.edu Fri Mar 4 11:30:56 2011 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Fri, 4 Mar 2011 11:30:56 -0800 Subject: System released 13:00-14:00 Message-ID: <004001cbdaa2$af23b0a0$0d6b11e0$@stanford.edu> I finished my work in the morning Thanks, Arash -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahazeghi at stanford.edu Fri Mar 4 11:46:44 2011 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Fri, 4 Mar 2011 11:46:44 -0800 Subject: System released 13:00-14:00 In-Reply-To: <004001cbdaa2$af23b0a0$0d6b11e0$@stanford.edu> References: <004001cbdaa2$af23b0a0$0d6b11e0$@stanford.edu> Message-ID: <006b01cbdaa4$e443a040$accae0c0$@stanford.edu> Sorry for the confusion looks I need this time From: Arash Hazeghi [mailto:ahazeghi at stanford.edu] Sent: Friday, March 04, 2011 11:31 AM To: raith at snf.stanford.edu Subject: System released 13:00-14:00 I finished my work in the morning Thanks, Arash -------------- next part -------------- An HTML attachment was scrubbed... URL: From sgchong at stanford.edu Mon Mar 7 14:19:01 2011 From: sgchong at stanford.edu (Soogine Chong) Date: Mon, 7 Mar 2011 14:19:01 -0800 (PST) Subject: raith free 3-6PM today Message-ID: <504072763.1068000.1299536341428.JavaMail.root@zm07.stanford.edu> Sorry for the late notice. -- Soogine Chong Stanford University PhD candidate in Electrical Engineering e-mail: sgchong at stanford.edu mobile: +1-650-804-8556 From hitoshi831223 at gmail.com Mon Mar 7 17:34:04 2011 From: hitoshi831223 at gmail.com (Hitoshi Ishiwata) Date: Mon, 7 Mar 2011 17:34:04 -0800 Subject: raith free today 6pm to 8pm Message-ID: sorry for late notice. sample prep failed. -- Hitoshi Ishiwata PhD Candidate Electrical Engineering Department Stanford University McCullough Building 476 Lomita Mall rm 410 Stanford, CA 94305 Phone: (650) 723-2056 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Tue Mar 8 16:30:47 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Tue, 08 Mar 2011 16:30:47 -0800 Subject: RAITH OFFLINE USB DONGLES? Please RSVP Message-ID: <4D76CA37.6000809@snf.stanford.edu> Greetings Raith Users: By chance did anyone take or check out the RAITH USB dongle late last year -- I am seeking dongle number 2. Check out is normally for a two week period.... If you find you have a dongle please return it to me ASAP.... I have other users seeking to borrow it for next weeks basis users class. Thank you, James Conway From jwc at snf.stanford.edu Tue Mar 8 16:34:37 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Tue, 08 Mar 2011 16:34:37 -0800 Subject: EIPBN 2011 Entrepreneurs Challenge Message-ID: <4D76CB1D.507@snf.stanford.edu> An HTML attachment was scrubbed... URL: From ahazeghi at stanford.edu Tue Mar 8 18:15:39 2011 From: ahazeghi at stanford.edu (Arash Hazeghi) Date: Tue, 8 Mar 2011 18:15:39 -0800 (PST) Subject: released 10:00-13:00 Wednesday Message-ID: <505210124.711917.1299636939440.JavaMail.root@zm03.stanford.edu> released my reservation tomorrow, sample not ready. Thanks, Arash -------------- next part -------------- An HTML attachment was scrubbed... URL: From kodama at stanford.edu Thu Mar 10 11:43:42 2011 From: kodama at stanford.edu (Takashi Kodama) Date: Thu, 10 Mar 2011 11:43:42 -0800 (PST) Subject: release the reservation from Friday 0:00 am to 3:00 am In-Reply-To: <39940708.903227.1299786125563.JavaMail.root@zm09.stanford.edu> Message-ID: <1365081442.903333.1299786222063.JavaMail.root@zm09.stanford.edu> I can not use this slot due to the delay of my upstream fabrication process. Sorry for the delay. From arkam at stanford.edu Thu Mar 10 18:09:40 2011 From: arkam at stanford.edu (Arka Majumdar) Date: Thu, 10 Mar 2011 18:09:40 -0800 (PST) Subject: I am having some problem..the image in SEM looks very bad..and also having trouble shootign dot--need to brainstorm with James probably--so releasing my raith time Message-ID: <1871550319.812542.1299809380660.JavaMail.root@zm06.stanford.edu> -- PhD Student Ginzton Lab (EE) Stanford University www.cvitae.org/arkam/ From jwc at snf.stanford.edu Fri Mar 11 09:22:00 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Fri, 11 Mar 2011 09:22:00 -0800 Subject: Raith Field service will be here to examine the machine stage leveling controls I expect them about 10 AM Message-ID: <4D7A5A38.5080906@snf.stanford.edu> Good Morning, Raith Field service will be here to examine the machine stage leveling controls I expect them about 10 AM Please allow them access to the system when they arrive. Thank you, James From khu834 at stanford.edu Fri Mar 11 11:46:39 2011 From: khu834 at stanford.edu (Kevin Chih-Yao Huang) Date: Fri, 11 Mar 2011 11:46:39 -0800 Subject: Raith free 1-3pm Message-ID: Moved session to Sat -------------- next part -------------- An HTML attachment was scrubbed... URL: From yuxinz at stanford.edu Sat Mar 12 11:46:59 2011 From: yuxinz at stanford.edu (Yuxin Zheng) Date: Sat, 12 Mar 2011 11:46:59 -0800 Subject: 2pm~5pm session released, sample not ready Message-ID: <003e01cbe0ee$408afd40$c1a0f7c0$@edu> Sorry for the late notice. Yuxin -------------- next part -------------- An HTML attachment was scrubbed... URL: From krivoire at stanford.edu Sat Mar 12 12:35:13 2011 From: krivoire at stanford.edu (Kelley Rivoire) Date: Sat, 12 Mar 2011 12:35:13 -0800 (PST) Subject: raith free noon-4pm tomorrow Message-ID: <50577300.5191.1299962113264.JavaMail.root@zm02.stanford.edu> raith free noon-4pm tomorrow Kelley From khu834 at stanford.edu Sat Mar 12 19:07:57 2011 From: khu834 at stanford.edu (Kevin Chih-Yao Huang) Date: Sat, 12 Mar 2011 19:07:57 -0800 Subject: Raith free till 9pm Message-ID: Done early -------------- next part -------------- An HTML attachment was scrubbed... URL: From khu834 at stanford.edu Sun Mar 13 23:43:17 2011 From: khu834 at stanford.edu (Kevin Chih-Yao Huang) Date: Sun, 13 Mar 2011 23:43:17 -0700 Subject: Raith free 12am-2am Message-ID: Write finished earlier -------------- next part -------------- An HTML attachment was scrubbed... URL: From kodama at stanford.edu Mon Mar 14 02:25:21 2011 From: kodama at stanford.edu (Takashi Kodama) Date: Mon, 14 Mar 2011 02:25:21 -0700 (PDT) Subject: Unload error Message-ID: <1113078452.33269.1300094721202.JavaMail.root@zm09.stanford.edu> Hi All, I could not unload previous user's sample from the instrument. The error seems to be related to the Y-Axis limit of the stage movement and I could not try the process again. The previous user's sample is still inside. I reported this problem on coral as well. Takashi Kodama From yuxinz at stanford.edu Mon Mar 14 17:44:11 2011 From: yuxinz at stanford.edu (Yuxin Zheng) Date: Mon, 14 Mar 2011 17:44:11 -0700 Subject: 9:30am-12:00 session release tomorrow due to headway shut down Message-ID: <012c01cbe2aa$1a306cd0$4e914670$@edu> -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Tue Mar 15 09:38:26 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Tue, 15 Mar 2011 09:38:26 -0700 Subject: Gentle reminder -- Raith Basic Users class starts at 10 AM today in Allen 201... the rest of the week in the Ebeam lab... Message-ID: <4D7F9602.9000607@snf.stanford.edu> Hello Raith Group 46: Sorry about the short term notice -- this is your only reminder that I am having the Raith Basic Users class this week for enrolled attendees and those whom have recently expressed interest in joining us. If you are in the To: field you are confirmed to attend this class. Others CC'd are invited to join us as observers and pending completion of pre-requisites you can continue training in the weeks that follow working with me during my RAITH sessions. This class is open to observe for all interested parties whom seek to further their knowledge of EBL. We will start with a lecture on the background principles needed for quality EBL starting at 10 AM in ALLEN 201 up above the Allen lunchroom area, second floor... The remainder of the class will be held each day in the Ebeam Lab in the SNF clean room. Tuesday March 15, 2011 10 - 12:30 Lecture Allen 201 2 - 6 PM Demonstration of Layer one exposure with James driving the tool writing on 100 mm Si wafer. Wednesday March 16, 2011 10 - 6 PM Hand On session -- Layer One setup and overlay registration exposures. We hope to break for lunch at 12:30 - 2:00 PM then continue through the afternoon. Thursday March 17, 2011 10 - 6 PM Hand On Session -- More exposures on the same wafer adding to patterns written. Introduction to the GDSII Editor and more exposure settings in detail. Friday March 18, 2011 10 - 4 PM Hands On Session - Exposures on your samples or mine possibly on another resist type. With such a small class due to several people dropping the class we will have lots of time for discussions on the specific topics and applications of the tool for your projects. We will even be able to get some of the exposure parameters for your devices determined. If you have GDSII patterns for your projects worked up by all means bring them to this class. Thank you for your interest in Ebeam technologies here at SNF! Best, James Conway From altamash at stanford.edu Tue Mar 15 12:27:07 2011 From: altamash at stanford.edu (Altamash Janjua) Date: Tue, 15 Mar 2011 12:27:07 -0700 (PDT) Subject: Raith free from now until 2PM Message-ID: <1639725650.26008.1300217227820.JavaMail.root@zm01.stanford.edu> Could not get my samples to work in time. Sorry for the late notice, Altamash From sgchong at stanford.edu Tue Mar 15 14:35:09 2011 From: sgchong at stanford.edu (Soogine Chong) Date: Tue, 15 Mar 2011 14:35:09 -0700 (PDT) Subject: raith free today 9PM to midnight Message-ID: <1699140339.52706.1300224909894.JavaMail.root@zm07.stanford.edu> Sorry for the late notice. -Soogine. -- Soogine Chong Stanford University PhD candidate in Electrical Engineering e-mail: sgchong at stanford.edu mobile: +1-650-804-8556 From sgchong at stanford.edu Thu Mar 17 14:22:41 2011 From: sgchong at stanford.edu (Soogine Chong) Date: Thu, 17 Mar 2011 14:22:41 -0700 (PDT) Subject: raith free 9PM-midnight today Message-ID: <487278575.158535.1300396961826.JavaMail.root@zm07.stanford.edu> Moved to a later slot -- Soogine Chong Stanford University PhD candidate in Electrical Engineering e-mail: sgchong at stanford.edu mobile: +1-650-804-8556 From toecutter4ranger at gmail.com Thu Mar 17 18:30:00 2011 From: toecutter4ranger at gmail.com (James Conway) Date: Thu, 17 Mar 2011 18:30:00 -0700 Subject: RAITH STATUS 18:16 HOURS THURSDAY MARCH 17, 2011 -- SYSTEM IS COMING UP FOR USERS THIS EVENING -- JUST STARTED PUMPING. Message-ID: HELLO RAITH COMMUNITY: Today working with Lev Markov from RAITH Field Service we replaced the Y motor to the Laser Interferometer Stage. Currently we are pumping down the system after having tested the motor -- but are not completely sure we have a complete solution to address the problem(s) of the motor using too much current during operations. We have made changes to the drive control settings in the RAITH.VBD to slow down the motor so it draws less current. It should not cause further Y axis errors in the software as observed recently by some Users during load / unload operations. (Y motor unable to reach exchange position...) I expect the system will be ready to start your loads and writes in about three hours or less. Please call me at 4125-412-4825 if you run into any problems during your sessions overnight. Please be prepared next week, possibly Wednesday afternoon, but more likely Thursday for us to come back and again replace the motor and the Y - axis mechanical drive spindle and bearings supports as we desire to completely address these problems to avoid further interruptions to Users or downtime on the tool. Thank you for you for your support! James Conway Ebeam Technology Group Stanford Nanofabrication Facility -------------- next part -------------- An HTML attachment was scrubbed... URL: From gshambat at stanford.edu Fri Mar 18 14:28:18 2011 From: gshambat at stanford.edu (Gary Shambat) Date: Fri, 18 Mar 2011 14:28:18 -0700 (PDT) Subject: Raith free 16:00 - 19:30 Message-ID: <1905895981.113491.1300483698978.JavaMail.root@zm01.stanford.edu> Sorry for the late notice From bilee at stanford.edu Fri Mar 18 17:13:02 2011 From: bilee at stanford.edu (Byoungil Lee) Date: Fri, 18 Mar 2011 17:13:02 -0700 Subject: Raith free tonight 0 - 4am References: <1905895981.113491.1300483698978.JavaMail.root@zm01.stanford.edu> Message-ID: <4A5D0EC1A3DA417E9F596032749E9BA5@BILEEOFFICE> Raith free tonight 0 - 4am. From khu834 at stanford.edu Fri Mar 18 20:55:43 2011 From: khu834 at stanford.edu (Kevin Chih-Yao Huang) Date: Fri, 18 Mar 2011 20:55:43 -0700 Subject: Done early free till 9:30pm Message-ID: -------------- next part -------------- An HTML attachment was scrubbed... URL: From sgchong at stanford.edu Sat Mar 19 14:38:21 2011 From: sgchong at stanford.edu (Soogine Chong) Date: Sat, 19 Mar 2011 14:38:21 -0700 (PDT) Subject: raith free 9PM-midnight today Message-ID: <1921867013.233019.1300570701312.JavaMail.root@zm07.stanford.edu> -- Soogine Chong Stanford University PhD candidate in Electrical Engineering e-mail: sgchong at stanford.edu mobile: +1-650-804-8556 From krivoire at stanford.edu Thu Mar 24 09:16:43 2011 From: krivoire at stanford.edu (Kelley Rivoire) Date: Thu, 24 Mar 2011 09:16:43 -0700 (PDT) Subject: raith free 9:30 am tomorrow Message-ID: <1533065427.157464.1300983403233.JavaMail.root@zm02.stanford.edu> raith free 9:30 am-2:30pm tomorrow From bilee at stanford.edu Mon Mar 28 01:25:25 2011 From: bilee at stanford.edu (Byoungil Lee) Date: Mon, 28 Mar 2011 01:25:25 -0700 Subject: raith free 2-5 am Message-ID: <3378F44EC46941B4B0C21BE5BF548EA2@BILEEOFFICE> Innotec is not working, so could not process the samples. -- Byoungil Lee Ph.D Candidate in Electrical Engineering Center for Integrated Systems Stanford University Phone: +1-650-796-9791 Email: bilee at stanford.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Mon Mar 28 17:49:50 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Mon, 28 Mar 2011 17:49:50 -0700 Subject: Problem raith SNF 2011-03-26 19:23:16: no piazo control connection Message-ID: <4D912CAE.9080106@snf.stanford.edu> If you see this issue again, simply perform a hardware rest by closing the application then gracefully exiting out of the Windows OS, always selecting shutdown. After ten seconds press the Silver Power button to restart the computer. Login to windows and resume your session. Your problems was caused by an communications loss interrupt during the initial boot of the application. Soon to be a FAQ! Thank you for your support! James On 3/26/2011 7:23 PM, carterlin at snf.stanford.edu wrote: > when logging in, see above error message. No height control > From khu834 at stanford.edu Mon Mar 28 20:55:48 2011 From: khu834 at stanford.edu (Kevin Chih-Yao Huang) Date: Mon, 28 Mar 2011 20:55:48 -0700 Subject: Poor stage motor control response, releasing session early Message-ID: Stage movement is jerky and poor, both with the joystick and software stepping. Large backlash movements, stage persistently moves in opposite direction with respect to the joystick. Unable to control stage motion accurately. Problem persists after hardware restart of both computers. Releasing session early. Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwc at snf.stanford.edu Tue Mar 29 10:03:07 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Tue, 29 Mar 2011 10:03:07 -0700 Subject: Problem raith SNF 2011-03-28 20:52:23: Jerky motor control Message-ID: <4D9210CB.5060605@snf.stanford.edu> Hello All, Likely this was that the User did not have the Laser Stage turned on and was operating the stage in coder mode. Just switch to laser control mode in the Laser Stage Control module. This is the default mode after load lock exchanges but if you save the project when in coder state your USER.VDB will overwrite the RAITH.VDB on application launch. another great FAQ in progress! I tried to respond to Kevin's phone calls, but was above Santa Cruz and not on the cell phone grid again until well after midnight... Thank you, James On 3/28/2011 8:52 PM, khu834 at snf.stanford.edu wrote: > Stage movement is not smooth, both with the joystick and software stepping. > Large backlash movements, stage persistently moves in opposite direction with respect to the joystick. > Unable to control stage motion accurately. > From toecutter4ranger at gmail.com Tue Mar 29 11:54:13 2011 From: toecutter4ranger at gmail.com (James Conway) Date: Tue, 29 Mar 2011 11:54:13 -0700 Subject: Laser Interferometer Power supply was found switched off last night. Message-ID: Greetings Raith Users: Please keep an eye out for strange setting on the tool and for starngers entering the Ebeam Lab. REF: http://snf.stanford.edu/cgi-bin/ezmlm-cgi?2170:mss:1365:201103:mmkkdjdbopbeechjolck *Subject:* Comment raith SNF 2011-03-29 11:47:58: laser for LIStage was found turned off *From:* jwc at snf.stanford.edu *Date:* Tue, 29 Mar 2011 11:47:59 -0700 ------------------------------ For reasons unknown the laser power supply was found to have been tripped off manually sometime late last evening. Appears someone actuated the switch as it is a guarded switch and it was found this morning in the 'open' 'power off ' position. Upon actuation the laser quickly came up in power and phase locked as expected. All stage operations are now normal. *Users are reminded that the Ebeam lab is a restricted access area and that they are to confront anyone whom comes into this area that is not a qualified User on the tools.* JWC -------------- next part -------------- An HTML attachment was scrubbed... URL: From altamash at stanford.edu Tue Mar 29 13:52:07 2011 From: altamash at stanford.edu (Altamash Janjua) Date: Tue, 29 Mar 2011 13:52:07 -0700 (PDT) Subject: Raith free from 5-7PM Message-ID: <333246826.351693.1301431927175.JavaMail.root@zm01.stanford.edu> Upstream Chlorine etcher still down. Thanks, Altamash From zzp at stanford.edu Tue Mar 29 16:58:04 2011 From: zzp at stanford.edu (Zhiping Zhang) Date: Tue, 29 Mar 2011 16:58:04 -0700 Subject: Raith free from 5-7PM In-Reply-To: <333246826.351693.1301431927175.JavaMail.root@zm01.stanford.edu> References: <333246826.351693.1301431927175.JavaMail.root@zm01.stanford.edu> Message-ID: <66B84A424F594EA0AB156B54D2F03E54@stanford.edu> Taken! Thanks, Zhiping -----Original Message----- From: Altamash Janjua [mailto:altamash at stanford.edu] Sent: Tuesday, March 29, 2011 1:52 PM To: raith at snf.stanford.edu Subject: Raith free from 5-7PM Upstream Chlorine etcher still down. Thanks, Altamash From jwc at snf.stanford.edu Wed Mar 30 09:39:04 2011 From: jwc at snf.stanford.edu (James W. Conway) Date: Wed, 30 Mar 2011 09:39:04 -0700 Subject: New Policies on usage of ESPACER conductive Polymer -- Apply on the HEADWAY2 coater only. Message-ID: <4D935CA8.8090403@snf.stanford.edu> An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: starheader.gif Type: image/gif Size: 4449 bytes Desc: not available URL: From krivoire at stanford.edu Wed Mar 30 17:06:05 2011 From: krivoire at stanford.edu (Kelley Rivoire) Date: Wed, 30 Mar 2011 17:06:05 -0700 (PDT) Subject: raith free tomorrow 3:30pm-8:30pm Message-ID: <304553357.338104.1301529965896.JavaMail.root@zm02.stanford.edu> sample will not be ready Kelley From gshambat at stanford.edu Wed Mar 30 22:51:54 2011 From: gshambat at stanford.edu (Gary Shambat) Date: Wed, 30 Mar 2011 22:51:54 -0700 (PDT) Subject: Shortening session (Free Thurs 10AM-2PM) Message-ID: <461207379.400988.1301550714016.JavaMail.root@zm01.stanford.edu> Don't need all the time From bilee at stanford.edu Thu Mar 31 21:32:42 2011 From: bilee at stanford.edu (Byoungil Lee) Date: Thu, 31 Mar 2011 21:32:42 -0700 Subject: raith free tomorrow 0-2am Message-ID: <9F036AE856F34DC09139BB0C852EFA07@BILEEOFFICE> raith free tomorrow 0-2am. -------------- next part -------------- An HTML attachment was scrubbed... URL: