James W. Conway
jwc at snf.stanford.edu
Fri Dec 7 10:53:48 PST 2012
I have just placed the fresh batch of HSQ (XR-1541-006) into the resist
refrigerator. This bottle is unopened and I will place SNF labels on it
Be sure to keep the material under refrigeration and not allow it to
warm to room temperature at any time.
On 12/5/2012 12:25 PM, Seongjae Cho wrote:
> Hello James,
> Thank you so much for your e-mail and updates.
> Yes, me and Seonghyun's questions were quenched when we were seeing you a couple of days ago
> and we've been struggling to get out of this situation with little HSQ right now.
> It will be really and truly appreciated if we are permitted to use some of
> the HSQ kept for emergency. We have only three 1.5 x 1.5 cm pieces to be coated
> so it won't be a big loss on the owner's side, either, but I quite doubt that
> the remaining amount in the lab like 1 mL sticking on the bottom may wholy cover the samples.
> Just 5 - 10 mL should be more than enough and really*100 appreciated. :-)
> I'll see you around 2 pm to surely learn where to get it or whom to ask further, etc.
> Thank you so much, James, and see you at the office!
> - Sincerely, Seongjae.
> ----- 원래 메시지 -----
> 보낸 사람: "James Conway" <jwconway at stanford.edu>
> 수신: "Seongjae Cho" <felixcho at stanford.edu>
> 참조: "Seonghyun Paik" <paekka3 at gmail.com>
> 보낸 시간: 2012년 12월 5일, 수요일 오후 12:11:26
> 제목: Re: HSQ request
> I think we covered this in the hallway last Friday and I hoped I
> answered all your questions then.
> I have HSQ on order. But you have my permission to use up the remaining
> supply. There is also some user owned HSQ (XR-1541-006) and Fox-12 in
> the lab that we may also utilize in an emergency.
> I will be back in the lab at 2:00 PM working on the RAITH system. I had
> a cancellation on the plan with another user so I am catching up on
> other work.
> If you still need my help please see me this afternoon or tomorrow.
> All the Best,
> On 11/29/2012 6:56 PM, Seongjae Cho wrote:
>> Hello James,
>> This is Seongjae Cho at Harris Group.
>> Seonghyun is trying to helping me with device fabrication
>> and e-beam lithography with HSQ is needed for patterning.
>> But he found that only 1 mL of HSQ is remaining in the bottle
>> and we are wondering if there is an extra bottle
>> , if not, if there is a fast way to make a purchase order so that
>> we can get a new bottle on Monday.
>> Or just a handful amount of HSQ should be fine since we have
>> only 3 pieces with 1.5 cm x 1.5 cm sizes. :-)
>> Me and Seonghyun need to complete the fabrication
>> on Monday since we have a very limited loan time of measurement tool.
>> So it will be appreciated if you can help us in finding a way.
>> If you expect a delay when making the purchase by ordinary purchase order
>> while if it is possible to get it fast in time by credit card purchase,
>> I'd like to support that process with a proper project card.
>> Maybe it should work if we can get a bottle by Tuesday
>> since the measurement equipment is turned in on Wednesday.
>> I'll be looking forward to having your advice on this
>> or we can meet and talk at early morning tomorrow.
>> You can let me know when you are available.
>> Thank you and have a good night.
>> - Sincerely, Seongjae.
More information about the raith